Issue 9, 2012

Hydrotreatment of Jatropha oil over NiMoLa/Al2O3catalyst

Abstract

The non-sulfided NiMoLa/Al2O3 catalyst was developed to produce renewable C15–C18 alkanes from the hydrotreatment of Jatropha oil. The NiMoLa/Al2O3 catalysts were prepared by an impregnation method and characterized by N2-BET, XRD, XPS, TPD-Hads, CO2-TPD and TGA techniques. The straight chain alkanes ranging from C15 to C18 were the main components in the product oil. A yield of 78%, a selectivity of 94% and a conversion of 83% were obtained at 370 °C, 3.5 MPa and 0.9 h−1 over the NiMoLa/Al2O3 catalyst (La 5.0 wt%). The influence of the reaction temperature (280–400 °C) and reaction time (4–177 h) on the composition of product oil were also investigated.

Graphical abstract: Hydrotreatment of Jatropha oil over NiMoLa/Al2O3 catalyst

Article information

Article type
Paper
Submitted
26 Mar 2012
Accepted
13 Jun 2012
First published
13 Jun 2012

Green Chem., 2012,14, 2499-2505

Hydrotreatment of Jatropha oil over NiMoLa/Al2O3 catalyst

J. Liu, C. Liu, G. Zhou, S. Shen and L. Rong, Green Chem., 2012, 14, 2499 DOI: 10.1039/C2GC35450K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements