Issue 18, 2012

Hydrophilic poly(vinylidene fluoride) (PVDF) membrane by in situpolymerisation of 2-hydroxyethyl methacrylate (HEMA) and micro-phase separation

Abstract

A method of obtaining a hydrophilic and antifouling poly(vinylidene fluoride) (PVDF) membrane is developed via in situ polymerisation of 2-hydroxyethyl methacrylate (HEMA) in PVDF solution and subsequent micro-phase separation. The immobilization of PHEMA in a PVDF membrane was verified by Fourier Transform Infrared Spectroscopy (FTIR) and 1H Nuclear Magnetic Resonance Spectroscopy (1H-NMR). X-ray Photoelectron Spectroscopy (XPS) studies further unveiled the enrichment of PHEMA on the PVDF membrane surfaces. Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) images revealed that the modified membrane had a fibrous-like microstructure in the cross section and a porous top surface. Water contact angle measurement suggested that the modified membrane formed by in situ polymerisation and micro-phase separation possessed higher hydrophilicity than the control membrane formed by blending PVDF and pre-polymerised PHEMA. The protein fouling of the modified membrane was considerably alleviated and the dried membrane showed spontaneous wettability and excellent permeability. Based on Wide-Angle X-ray Diffraction (WAXD) and the above results, a possible membrane formation mechanism for the in situ polymerisation and subsequent micro-phase separation was proposed.

Graphical abstract: Hydrophilic poly(vinylidene fluoride) (PVDF) membrane by in situ polymerisation of 2-hydroxyethyl methacrylate (HEMA) and micro-phase separation

Article information

Article type
Paper
Submitted
06 Feb 2012
Accepted
09 Mar 2012
First published
09 Mar 2012

J. Mater. Chem., 2012,22, 9131-9137

Hydrophilic poly(vinylidene fluoride) (PVDF) membrane by in situ polymerisation of 2-hydroxyethyl methacrylate (HEMA) and micro-phase separation

M. Tao, F. Liu and L. Xue, J. Mater. Chem., 2012, 22, 9131 DOI: 10.1039/C2JM30695F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements