Issue 24, 2012
From the journal:

Journal of Materials Chemistry

Recycling single-wall carbon nanotube anodes from lithium ion batteries

Christopher M. Schauerman,ab   Matthew J. Ganter,ab   Gabrielle Gaustad,b   Callie W. Babbitt,b   Ryne P. Raffaellec  and  Brian J. Landi*ad  

* Corresponding authors

a NanoPower Research Laboratories, Rochester Institute of Technology, Rochester, NY, USA
E-mail: cms3176@rit.edu

b Golisano Institute for Sustainability, Rochester Institute of Technology, Rochester, NY, USA

c Vice President for Research, Rochester Institute of Technology, Rochester, NY, USA

d Department of Chemical and Biomedical Engineering, Rochester Institute of Technology, Rochester, NY, USA
E-mail: bjlsps@rit.edu

Abstract

Large scale incorporation of nanomaterials into industrial systems and commercial products is relatively new, and therefore little attention has been given for options when these products reach their end-of-life. During the course of this study, the ability to recycle end-of-life (EOL) single-wall carbon nanotubes (SWCNTs), recovered from lithium ion battery electrodes, was investigated. Specifically, SWCNT–Li+ coin cells were forced to their EOL though extended cycling at high charge rates and recycled using a series of acid and thermal treatments originally developed for the purification of as-produced SWCNT material. The recycling treatments were successful in removing the EOL byproducts (e.g. solid electrolyte interphase, lithium) and upgrading the SWCNT material to its pre-cycling functionality. The material was characterized at each step in the recycling process through a combination of scanning electron microscopy, thermogravimetric analysis, Raman spectroscopy, and optical absorption spectroscopy. The energy required for each of the recycling procedures was measured and compared to the energy of SWCNT synthesis. The recycled-SWCNT material was successfully incorporated into Li+ battery coin cells with insertion and extraction capacities of 650 mA h g−1, comparable to the virgin pure-SWCNT electrodes. Therefore, the ability to refunctionalize “used” SWCNTs from a device, through chemical processing, to their initial purity and functionality has been demonstrated. The direct energy required to refunctionalize the SWCNTs was measured and is less than half of the direct energy required to synthesize new material. Thus, the ability to preserve the nanoscale properties of SWCNTs with reduced impact offers new opportunities for end-of-life management.

Graphical abstract: Recycling single-wall carbon nanotube anodes from lithium ion batteries

About
Cited by
Related
Download options Please wait...

Article information

DOI
https://doi.org/10.1039/C2JM31971C
Article type
Paper
Submitted
29 Mar 2012
Accepted
19 Apr 2012
First published
19 Apr 2012

J. Mater. Chem., 2012,22, 12008-12015

Permissions

Request permissions

Recycling single-wall carbon nanotube anodes from lithium ion batteries

C. M. Schauerman, M. J. Ganter, G. Gaustad, C. W. Babbitt, R. P. Raffaelle and B. J. Landi, J. Mater. Chem., 2012, 22, 12008 DOI: 10.1039/C2JM31971C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements