Issue 61, 2015

Control of the oxidation level of graphene oxide for high efficiency polymer solar cells

Abstract

Graphene oxides (GOs) have been used as interfacial layers for fabricating more stable organic solar cells (OSCs). However, the influence of the degree of oxidation of GOs on their optoelectronic properties has been ignored. In this article, a series of GOs with different degrees of oxidation were successfully synthesized, by controlling the amount of oxidant KMnO4 during the oxidation process of graphite. With increasing oxidation level, more oxygenated functional groups were attached to the carbon basal plane and more defects were introduced into the GO sheets, resulting in an increased work function (WF) and a decreased conductivity. Meanwhile, the film-forming property of GOs was improved with increasing oxidation level, which is attributed to the adequate exfoliation of the GO sheets. After carefully controlling the oxidation level of GOs, the OSCs with GOs as the hole transport layer (HTL) show an efficiency value of 3.0%, comparable to that with poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) (3.2%), originating from the good film-forming property, appropriate work function and high conductivity.

Graphical abstract: Control of the oxidation level of graphene oxide for high efficiency polymer solar cells

Supplementary files

Article information

Article type
Paper
Submitted
03 Feb 2015
Accepted
07 May 2015
First published
07 May 2015

RSC Adv., 2015,5, 49182-49187

Author version available

Control of the oxidation level of graphene oxide for high efficiency polymer solar cells

R. Wu, Y. Wang, L. Chen, L. Huang and Y. Chen, RSC Adv., 2015, 5, 49182 DOI: 10.1039/C5RA02099A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements