Issue 16, 2017

Increased humidity can soften glassy Langmuir polymer films by two mechanisms: plasticization of the polymer material, and suppression of the evaporation cooling effect

Abstract

Glassy Langmuir polymer films exhibit a rapid increase in surface pressure at high compression. High relative humidity typically mitigates this increase in surface pressure. In an attempt to understand the origin of this phenomenon, we investigated the effects of relative humidity on surface pressure–area isotherm properties for four different types of polymers with similar bulk glass transition temperatures: poly(D,L-lactic-co-glycolic acid) (PLGA, Tg ≈ 45 °C), poly(vinyl acetate) (PVAc, Tg ≈ 41 °C), poly(n-propyl methacrylate) (PnPMA, Tg ≈ 41 °C), and poly(vinyl stearate) (PVS, Tg ≈ 47 °C, Tm ≈ 47 °C). Bulk PLGA and PVAc materials are slightly hygroscopic, although they are insoluble in water; the bulk glass transition temperatures of these polymers are decreased under high humidity conditions. Analogously, the surface pressures of Langmuir PLGA and PVAc films become significantly reduced under high relative humidity, which can, therefore, be attributed mainly to the plasticizing effect of humidity on the polymer. X-ray reflectivity (XR) measurements suggest that humidity, however, does not significantly affect the molecular-level structure of the Langmuir polymer film. Interestingly, in the case of PnPMA, although its bulk glass transition temperature is unaffected by humidity levels, Langmuir films formed from PnPMA show significantly decreased surface pressures at high humidity conditions. We confirmed that this result is not an artifact associated with surface pressure measurements; humidity does not influence the wetting characteristics of the Wilhelmy probe at the air–polymer–water interface. It appears that the humidity-dependent behavior of Langmuir PnPMA films can only be explained in terms of the effects of relative humidity on the rate of water evaporation and thus the temperature at the surface of the polymer film; high humidity suppresses the evaporation of water and thus increases the temperature of the polymer-coated interface, resulting in a softening of the polymer film. We experimentally confirmed that increasing the relative humidity from about 30–40% to about 85–90% has an equivalent effect on PnPMA surface pressure as increasing the temperature of the system by about 2 °C. A heat and mass transfer analysis supports this correspondence. Langmuir PVS films exhibit a completely different behavior than PLGA, PVAc and PnPMA systems; PVS forms isolated two-dimensional crystalline domains at the air–water interface, and their surface pressure–area behavior is commensurate to that of colloidal particles spread at the air–water interface. Humidity seems to affect the surface pressure of PVS through a mechanism similar to the PnPMA situation.

Graphical abstract: Increased humidity can soften glassy Langmuir polymer films by two mechanisms: plasticization of the polymer material, and suppression of the evaporation cooling effect

Supplementary files

Article information

Article type
Paper
Submitted
05 Feb 2017
Accepted
30 Mar 2017
First published
04 Apr 2017

Phys. Chem. Chem. Phys., 2017,19, 10663-10675

Increased humidity can soften glassy Langmuir polymer films by two mechanisms: plasticization of the polymer material, and suppression of the evaporation cooling effect

H. C. Kim, Y. H. Choi, W. Bu, M. Meron, B. Lin and Y. Won, Phys. Chem. Chem. Phys., 2017, 19, 10663 DOI: 10.1039/C7CP00785J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements