Abstract
High-pressure torsion (HPT) was conducted on disks of a Bi-Sn eutectic alloy under a pressure of 6.0 GPa. The microstructural evolution was studied by scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD). Measurements of Vickers microhardness showed decreasing strength caused by strain weakening after HPT processing. Tensile testing was performed under initial strain rates from 10−4 to 10−2 s−1 at room temperature. The results demonstrate a much improved elongation to failure for the Bi-Sn alloy after HPT- processing. The Bi-Sn alloy processed through 10 turns gave an elongation to failure of more than 1200% at an initial strain rate of 10−4 s−1 at room temperature which is significantly larger than the elongation to failure of ~110% in the as-cast Bi-Sn alloy under the same tensile conditions.
Export citation and abstract BibTeX RIS
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.