Abstract
An atmospheric pressure non-equilibrium plasma (APNEP) developed in the UK by EA Technology Ltd is currently being investigated in collaboration with the University of Surrey. Of the many applications of surface modification that can be induced using plasmas, adhesion enhancement is one of the most commercially important. In this paper, we illustrate the use of an atmospheric plasma to enhance the adhesion characteristics of low-density polyethylene (LDPE) and poly(ethylene terephthalate) (PET). The polymers were treated in the remote afterglow region of an atmospheric pressure plasma to avoid the thermal effects that can cause degradation for thermally sensitive materials when placed in direct contact with the plasma. Reactive (oxygen containing) and inert (oxygen free) atmospheric plasmas rapidly impart adhesion enhancement by a factor of two to ten as measured by 180° peel tests. However, extended exposure to the atmospheric plasma does not impart additional adhesion enhancement as the surface is ablated revealing the underlying polymer with poor adhesive characteristics. In contrast, vacuum plasma treated LDPE and PET show increased adhesion with extended plasma treatment. An adhesion enhancement in excess of two to three orders of magnitude was found to be achievable for vacuum plasma treatment times greater than 10 min.
Export citation and abstract BibTeX RIS