Thermo-optic noise is likely to be the dominant noise source in next generation ultralow noise optical cavities. We developed three measurement and analysis methods, allowing us to estimate the level of coating thermo-optic noise in optical cavities, including interferometric gravitational wave detectors. We measured the shift in the broadband transmission spectra as a function of temperature for single-layer, high index coatings in order to find the thermo-optic coefficient, ${\beta }_H$, of a coating while assuming the thermal expansion coefficient, ${\alpha }_H$. Our value for ${\beta }_H$ could then be used to calculate the thermo-optic noise in any high-finesse optical cavity using coatings with the same high index layer material. We also measured the spectra as a function of temperature of a multilayer, high-reflectivity coating where the material composition of the layers was similar to the coatings installed in Advanced LIGO. This method has the advantage of allowing us to calculate thermo-optic noise directly; ${\alpha }_H$ and ${\beta }_H$ do not need to be known separately, although we do need to know the value of the overall coating thermal expansion coefficient. Finally, we used lasers of different wavelengths to measure transmission changes on the band edges of a multilayer high-reflectivity coating. This gave measurements with high statistical precision but potentially lower systematic accuracy. To address systematic accuracy concerns, we used a constrained Monte Carlo application of the theory of multilayer coating transmission.

• Received 10 August 2018

DOI:https://doi.org/10.1103/PhysRevD.98.122004