Paper
9 July 1999 Improved design and performance of the SMA torque tube for the DARPA Smart Wing program
A. Peter Jardine, Jonathan D. Bartley-Cho, John S. Flanagan
Author Affiliations +
Abstract
In recent Smart Wing wind tunnel tests at NASA Langley, we demonstrated over 5 percent of span-wise twist at M equals 0.205. This was a considerable improvement over the 1.25 degree of twist demonstrated during the initial tunnel test. Key to the improvements were two developments. First a different torque loading path in the structure, which resulted in torque being directly reacted from root to wing tip. Secondly, a new SMA actuator was developed, with a measured blocking torque of 3500 +/- 100 in-lb. The second round of tunnel test not only demonstrated increased wing twist; we also were able to command a variety of twist angles and were able to show that the wing could maintain a predetermined twist for over an hour with a stability of 0.05 degrees. Power consumption was recorded, with maximum power of 200W during twisting, and a power demand of 20W for maintaining wing twist.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Peter Jardine, Jonathan D. Bartley-Cho, and John S. Flanagan "Improved design and performance of the SMA torque tube for the DARPA Smart Wing program", Proc. SPIE 3674, Smart Structures and Materials 1999: Industrial and Commercial Applications of Smart Structures Technologies, (9 July 1999); https://doi.org/10.1117/12.351564
Lens.org Logo
CITATIONS
Cited by 27 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Shape memory alloys

Actuators

Wind measurement

Manufacturing

Sensors

Surface finishing

Analytical research

Back to Top