Basic properties and application of shape memory polymer composite to deployable hinge for solar arrays

Xiaohua Wang; Wei Zhang; Xin Lan; Yanju Liu; Jinsong Leng

doi:10.1117/12.780331

1 November 2007 Basic properties and application of shape memory polymer composite to deployable hinge for solar arrays

Xiaohua Wang, Wei Zhang, Xin Lan, Yanju Liu, Jinsong Leng

Proceedings Volume 6423, International Conference on Smart Materials and Nanotechnology in Engineering; 642356 (2007) https://doi.org/10.1117/12.780331
Event: International Conference on Smart Materials and Nanotechnology in Engineering, 2007, Harbin, China

Abstract

This paper is concerned about the basic properties of deployment of shape memory polymer composite (SMPC) and its application to deployable hinge for solar arrays. Shape memory polymer (SMP) used in this study is a thermoset styrene-based shape memory resin in contrast to normal thermoplastic SMPs. Carbon fiber fabric reinforced SMPC is discussed here. In order to investigate the basic performances of deployment for SMPC hinge, the experimental methods are used as follows: dynamic mechanical analysis (DMA), three point bending test and deployment tests. Results indicate that the glass transition temperature (T_g) of SMPC is approximate 63°C. SMPC shows typical linear elasticity and high bending modulus before glass transition in SMP, while exhibits apparent nonlinear viscoelasticity and low bending modulus within the range of glass transition in SMP. The shape recovery ratio of SMPC is above 90% at/above T_g, while drops sharply at below T_g. The deployment properties of SMPC depend strongly on the number of thermomechanical cycles, which become relatively stable after some packaging/deployment cycles. Moreover, deployment velocity and shape recovery ratio rise remarkably with the increase of temperature of SMPC. In the end, a prototype of solar array actuated by SMPC hinge, which is heated by passing an electrical current, deploys from about 180° to 0° in one minute. This SMPC hinge performs good deployment performances during numerous thermomechanical cycles.

Citation Download Citation

Xiaohua Wang, Wei Zhang, Xin Lan, Yanju Liu, and Jinsong Leng "Basic properties and application of shape memory polymer composite to deployable hinge for solar arrays", Proc. SPIE 6423, International Conference on Smart Materials and Nanotechnology in Engineering, 642356 (1 November 2007); https://doi.org/10.1117/12.780331

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available