Paper
22 April 2009 Characterization of thermal imagers under various ambient conditions
Riho Vendt, Priit Jaanson, Viktor Vabson, Martin Vilbaste, Toomas Kübarsepp, Mart Noorma
Author Affiliations +
Abstract
Thermal imagers are often used under ambient conditions, which differ significantly from the calibration conditions. In this paper a method for characterization of thermal imagers under various ambient conditions is described in the ambient temperature range from -10 °C to +23 °C. A flat-plate blackbody source attached to a climatic chamber has been used to simulate the measurement conditions corresponding to the use of the imagers in thermography of buildings. The lower temperature limit has been selected based on typical field measurement conditions in the Nordic regions while the upper limit is a typical laboratory temperature during the calibration of the instruments. Correction factors of more than 1 K relative to the calibration at the laboratory conditions have been observed at lower temperatures with a high-quality imager under test. Analysis of the measurement results with corresponding uncertainty estimation is described. The expanded uncertainty (k = 2) of the correction factor has been estimated to be 0.4 K.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Riho Vendt, Priit Jaanson, Viktor Vabson, Martin Vilbaste, Toomas Kübarsepp, and Mart Noorma "Characterization of thermal imagers under various ambient conditions", Proc. SPIE 7299, Thermosense XXXI, 729902 (22 April 2009); https://doi.org/10.1117/12.818423
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Thermography

Temperature metrology

Imaging systems

Black bodies

Calibration

Thermal modeling

Climatology

RELATED CONTENT

Analysis of the relative merits of the 3 5 μm...
Proceedings of SPIE (May 12 2015)
Challenges in IR system testing
Proceedings of SPIE (October 17 1994)
Thermographic calibration of graybody objects
Proceedings of SPIE (March 01 1990)
Thermal image calibration: Infracal
Proceedings of SPIE (September 08 1995)

Back to Top