Abstract—
The results of measuring the deformation of products manufactured by methods of additive technologies are presented. The process of searching for and determining subsurface delamination and inconsistency defects by a contactless optical method based on shearography is shown. This method works on the principles of interferometry and holography. The slightest displacement of the surface can be measured with it with an accuracy on the order of the wavelength of light. A calibration device that reproduced the surface deformation was used to adjust the shearograph. The results of experimental studies show high sensitivity to small deformations of products, which is approximately 0.2 µm.
Similar content being viewed by others
REFERENCES
Klei, J., Stern, M., Franchin, G., Kayser, M., Inamura, C., Dve, S., Weaver, J.C., Houk, P., Colombo, P., Yang, M., and Oxman, N., 3D Print.Addit. Manuf., 2015, vol. 2, no. 3, p. 92. https://doi.org/10.1089/3dp.2015.0021
Kablov, E.N., Aviats. Mater. Tekhnol., 2012, no. S, p. 7.
Uglov, A.L., Erofeev, V.I., and Smirnov, A.N., Akusticheskii kontrol' oborudovaniya pri izgotovlenii i ekspluatatsii (Acoustical Testing of Equipment under Manufacturing and Operational Process), Moscow: Nauka, 2009.
Fedosenko, Yu.K., Shkatov, P.N., and Efimov, A.G., Vikhretokovyi kontrol'. Uchebnoe posobie (Eddy Current Testing. Student’s Book), Klyuev, V.V., Ed., Moscow: Spektr, 2011.
Steinchen, W. and Yang, L., Digital Shearography: Theory and Application of Digital Speckle Pattern Shearing Interferometry, SPIE Press, 2003.
Aleshin, N.P., Murashov, V.V., Evgenov, A.G., Grigoriev, M.V., Shchipakov, N.A., Vasilenko, S.A., and Krasnov, I.S., Russ. J. Nondestr. Test., 2016, vol. 52, no. 1, p. 38.
Ivanov, A.D., Minaev, V.L., Vishnyakov, G.N., and Levin, G.G., Materialy Vserossiiskoi nauchno-tekhnicheskoi konferentsii “Metallovedenie i sovremennye razrabotki v oblasti tekhnologii lit’ya, deformatsii i antikorrozionnoi zashchity legkikh splavov” (Moskva, 12 aprelya 2019) (Proc. All-Russian Scientific and Technical Conference “Metal Science and Modern Developments in the Field Technologies for Casting, Deformation, and Anti-Corrosion Protection of Light Alloys”, Moscow, April 12, 2019), Moscow: All-Russian Scientific Research Institute of Aviation Materials, 2019, p. 74.
Ivanov, A.D., Minaev, V.L., and Vishnyakov, G.N., Sbornik trudov “Luchshii molodoi metrolog KOOMET-2019” (Collection of Scientific Works “The Best Young Metrologist KOOMET-2019”), Kazan, June 5–6, 2019, p. 26.
Waldner, S.P., in Interferometry in Speckle Light: Theory and Applications, Jacquot, P. and Fournier, J.M., Eds., Berlin, Heidelberg: Springer, 2000, p. 144. https://doi.org/10.1007/978-3-642-57323-1_40
Vishnyakov, G., Levin, G., Minaev, V., and Nekrasov, N., Appl. Opt., 2015, vol. 54, no. 15, p. 4797. https://doi.org/10.1364/AO.54.004797
Herráez, M.A., Burton, D.R., Lalor, M.J., and Gdeisat, M., A, Appl. Opt., 2002, vol. 41, no. 35, p. 7437. https://doi.org/10.1364/AO.41.007437
Funding
This work was supported by the Ministry of Education and Science of the Russian Federation within the framework of the implementation of the agreement No. 14.625.21.0041 of September 26, 2017 (unique identifier RFMEFI62517X0041).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ivanov, A.D., Minaev, V.L. & Vishnyakov, G.N. A Shearograph for Nondestructive Testing of Products Obtained by Additive Technologies. Instrum Exp Tech 62, 871–875 (2019). https://doi.org/10.1134/S0020441219060174
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0020441219060174