Abstract
The results of the study of a complex of properties of elastomeric composite material based on nitrile butadiene rubber BNKS-18 and ultra-high molecular weight polyethylene are presented. The influence of UHMWPE on the vulcanization characteristics of rubber compounds, the physical and mechanical parameters of vulcanizates before and after thermal aging in a hydrocarbon medium and air, and the dynamic properties before and after vulcanization has been studied.
Similar content being viewed by others
REFERENCES
Utracki, L.A., Polymer Blends Handbook, Dordrecht: Kluwer, 2003.
Zhang, X., Huang, H., and Zhang, Y., Dynamically vulcanized nitrile rubber/polypropylene thermoplastic elastomers, J. Appl. Polym. Sci., 2002, vol. 85, no. 14, pp. 2862–2866. https://doi.org/10.1002/app.10884
Shadrinov, N.V., Sokolova, M.D., Okhlopkova, A.A., Lee, J., Jeong, D.-Y., Shim, E.L., and Cho, J.-H., Enhancement of compatibility between ultrahigh-molecular-weight polyethylene particles and butadiene – nitrile rubber matrix with nanoscale ceramic particles and characterization of evolving layer, Bull. Korean Chem. Soc., 2013, vol. 34, no. 12, pp. 3762–3766. https://doi.org/10.5012/bkcs. 2013.34.12.3762
Shadrinov, N.V. and Sokolova, M.D., Study of the effect of activated zeolite on the deformation of polymer-elastomer composites by atomic force microscopy, Materialovedenie, 2014, no. 7, pp. 17–22.
Shadrinov, N.V., Sokolova, M.D., and Davydova, M.L., Development of frost resistant rubber composites, trial tesing and introduction into industry of republic of Sakha (Yakutiya), Gorn. Inform.-Anal. Byull., 2017, no. S24, pp. 319–328.
Sokolova, M.D., Davydova, M.L., and Shadrinov, N.V., The modification of surface of dispersed fillers for their application in polymer–elastomer composites, Prot. Met. Phys. Chem. Surf., 2018, vol. 54, pp. 845–852. https://doi.org/10.1134/S2070205118040147
Wang, P.-Y., Qian, H.-L., Yang, C.-L., and Ying-Chen, Characterization of the aging behavior of raw epoxidized natural rubber with a rubber processing analyzer, J. Appl. Polym. Sci., 2006, vol. 100, pp. 1277–1281. https://doi.org/10.1002/app.23062C
Gao, T., Xie, R., Zhang, L., Gui, H., and Huang, M., Use of rubber process analyzer for characterizing the molecular weight parameters of natural rubber, Int. J. Polym. Sci., 2015, vol. 2015, art. ID 517260. https://doi.org/10.1155/2015/517260
Yahaya, L.E., Adebowale, K.O., and Olu-Owolabi, B.I., Cure characteristics and rheological properties of modified kaolin-natural rubber composites, Am. Chem. Sci. J., 2014, vol. 4, no. 4, pp. 472–480. https://doi.org/10.9734/ACSJ/2014/6575
Honorato, L., Lopes Dias, M., Azuma, C., and Reis Nunes, R.C., Rheological properties and curing features of natural rubber compositions filled with fluoromica ME 100, Polímeros, 2016, vol. 26, no. 3, pp. 249–253. https://doi.org/10.1590/0104-1428.2352
Lopez-Manchado, M.A., Arroyo, M.A., Herrero, M.B., and Biagiotti, J., Vulcanization kinetics of natural rubber-organoclay nanocomposites, J. Appl. Polym. Sci., 2003, vol. 89, no. 1, pp. 1–15. https://doi.org/10.1002/app.12082
Payne, A.R. and Whittaker, R.E., Low strain dynamic properties of filled rubbers, Rubber Chem. Technol., 1971, vol. 44, no. 2, pp. 440–478. https://doi.org/10.5254/1.3547375
Robertson, C.G. and Roland, C.M., Glass transition and interfacial segmental dynamics in polymer-particle composites, Rubber Chem. Technol., 2008, vol. 81, no. 3, pp. 506–522. https://doi.org/10.5254/1.3548217
Bohm, G.A., Tomaszewski, W., Cole, W., and Hogan, T., Furthering the understanding of the non linear response of filler reinforced elastomers, Polymer, 2010, vol. 51, no. 9, pp. 2057–2068. https://doi.org/10.1016/j.polymer.2010.01.047
Funt, J.M., Dynamic testing and reinforcement of rubber, Rubber Chem. Technol., 1988, vol. 61, no. 5, pp. 842–865. https://doi.org/10.5254/1.3536222
Maier, P.G. and Goritz, D., Molecular interpretation of the Payne effect, Kautsch. Gummi Kunstst., 1996, vol. 49, no. 1, pp. 18–21.
Chazeau, L., Brown, J.D., Yanyo, L.C., and Sternstein, S.S., Modulus recovery kinetics and other insights into the Payne effect for filled elastomers, Polym. Compos., 2000, vol. 21, no. 2, pp. 202–222. https://doi.org/10.1002/pc.10178
Barick, A.K. and Tripathy, D.K., Effect of organically modified layered silicate nanoclay on the dynamic viscoelastic properties of thermoplastic polyurethane nanocomposites, Appl. Clay Sci., 2011, vol. 52, no. 1, pp. 312–321. https://doi.org/10.1016/j.clay.2011.03.010
Kayushnikov, S.N., Prokopchuk, N.R., and Uss, E.P., Tire elastomer compositions with zinc containing technological additives, Tr. Belorus. Gos. Tekhnol. Univ., Ser. 2: Khim. Tekhnol., Biotekhnol., Geoekol., 2017, no. 2, pp. 75–82.
Chen, Y.K., Wang, Y.P., and Xu, C.H., Study of viscoelastic properties of EPDM filled with zinc dimethacrylate prepared in situ by using a rubber process analyzer, J. Macromol. Sci., Part B: Phys., 2012, vol. 51, no. 10, pp. 1921–1933. https://doi.org/10.1080/00222348.2012.660028
Wu, J., Chen, L., Su, B.L., and Wang, Y.S., Evolution of Payne effect of silica-filled natural rubber in curing process, J. Rubber Res., 2019, vol. 22, pp. 127–132. https://doi.org/10.1007/s42464-019-00018-7
Tager, A.A., Fiziko-khimiya polimerov (Physical Chemistry of Polymers), 4th ed., Moscow: Nauchnyi Mir, 2007.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Sh. Galyaltdinov
Rights and permissions
About this article
Cite this article
Shadrinov, N.V., Borisova, A.A. Thermophysical and Dynamic Properties of Nitrile Butadiene Rubber Filled with Ultra-High Molecular Weight Polyethylene. Inorg. Mater. Appl. Res. 12, 1112–1119 (2021). https://doi.org/10.1134/S2075113321040389
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113321040389