Abstract
An approach to the modeling of the process of the formation of a lamellar structure of thermal coatings, including plasma coatings, at the spraying of metal powders is proposed. The results are presented, which concern the development of the computational algorithm and the program complex for modeling the process of laying the splats in the coating with regard for the topology of its surface, which varies dynamically at the spraying, as well as the formation of a lamellar structure and porosity of the coating. The experimentally verified theoretical solutions are used to predict the scenarios of the formation of splats and rapid prediction of their thicknesses and diameters. The results of computational experiments illustrating the performance of the developed computational technology are presented.
Similar content being viewed by others
References
M.F. Zhukov and O.P. Solonenko, High-temperature Dusty Jets in the Processes of Treatment of Powder Materials, Inst. Thermophysics SB RAS, Novosibirsk, 1990.
V.V. Kudinov, Plasma Coatings, Nauka, Moscow, 1977.
O.P. Solonenko, A.P. Alkhimov, V.V. Marusin et al., High-Energy Processes of Treatment of Materials, Nauka, Siberian Publ. Company of RAS, 2000.
O.P. Solonenko and A.V. Smirnov, Collision of a melt drop with a surface: Theory and a model experiment, Doklady Physics, 1998, Vol. 43, No. 11, P. 689–692.
O.P. Solonenko, Equilibrium solidification of melted microdroplets under their collision with substrate: Theory and its application in thermal spray technology, in: O.P. Solonenko (Ed.), Thermal Plasma Torches and Technologies. Vol. 2. Thermal Plasma and Allied Technologies: Research and Developments, Cambridge Inter. Sci. Publ., Cambridge, England, 2001, P. 78–98.
O.P. Solonenko and A.V. Smirnov, Equilibrium solidification of melted microdroplets under their collision with substrate: Model experiment and criterial generalization of splat morphology. O.P. Solonenko (Ed.), Thermal Plasma Torches and Technologies. Vol. 2. Thermal Plasma and Allied Technologies: Research and Developments, Cambridge Inter. Sci. Publ., Cambridge, England, 2001, P. 99–113.
O.P. Solonenko, E.P. Shurina, and A.V. Gobysh, New approach to computer-aided design and optimization of the plasma spray process: concept and software, in: P. Fauchais (Ed.), Progress in Plasma Processing of Materials, Begell House, Inc., New York, 2003, P. 431–438.
O.P. Solonenko, Sensitivity analysis and inverse link outlet coating characteristics — torch operating conditions’ in thermal spray technology, in: Proc. 14th Inter. Symp. on Plasma Chem., 2–6 August, Praha, 1999, Vol. 4, P. 1995–2000.
A.V. Smirnov, Experimental Investigation of the Interaction of Droplets of Metal Melts with the Base, Abstr. Ph.D. Thesis, ITAM SB RAS, Novosibirsk, 2000.
H.B. Parizi, L. Rosenzweig, J. Mostaghimi et al., Numerical simulation of droplet impact on patterned surfaces, in: B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, G. Montavon (Eds.), Thermal Spray 2007: Global Coating Solutions, Published by ASM Inter., Materials Park, Ohio, USA, 2007, P. 213–218.
V.A. Blednov, V.I. Iordan, and O.P. Solonenko, Modeling of the formation of a lamellar structure and porosity of plasma powder coatings with regard for variable surface topology at spraying, Izv. Tomsk. Politekhn. Univ., 2010, Vol. 317, No. 5, P. 82–87.
E.V. Shikin and A.I. Plis, Curves and Surfaces on the Monitor Screen. Manual on Splines for the User, Dialog-MIFI, Moscow, 1996.
Author information
Authors and Affiliations
Corresponding author
Additional information
The work was financially supported by SB RAS within the framework of the Interdisciplinary Integration Project of SB RAS No. 1 for the years 2009–2011.
Rights and permissions
About this article
Cite this article
Solonenko, O.P., Blednov, V.A. & Iordan, V.I. Computer design of thermal sprayed metal powder coatings. Thermophys. Aeromech. 18, 255–272 (2011). https://doi.org/10.1134/S0869864311020065
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0869864311020065