Skip to main content
SpringerLink
Log in

Experimental Study on Heat Transfer and Critical Heat Flux during Pool Boiling of Nitrogen on 3D Printed Structured Copper Capillary-Porous Coatings

  • Published:
Journal of Engineering Thermophysics Aims and scope

Abstract

A study on the heat transfer, critical heat fluxes, and dynamics of vaporization during boiling of liquid nitrogen at pressures of 0.1 and 0.018 MPa under conditions of stationary heat release has been carried out. The test sections were a smooth copper plate and a plate with a capillary-porous coating created by additive 3D printing. It has been shown that the presence of the coating leads to significant intensification of the heat transfer, up to 6 times, and an increase in the critical heat flux of 30% as compared with the smooth sample. High-speed video recording of the boiling was carried out, on the basis of which experimental data on the bubble departure diameters were obtained and qualitative assessment of the density of active nucleation sites for both types of heaters was performed.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

REFERENCES

  1. Surtaev, A.S., Serdyukov, V.S., and Pavlenko, A.N., Nanotechnologies for Thermophysics: Heat Transfer and Crisis Phenomena at Boiling, Nanotech. Russia, 2016, vol. 11, nos. 11–12, pp. 696–715.

    Article  Google Scholar 

  2. Khan, S.A., Atieh, M.A., and Koc, M., Micro-Nano Scale Surface Coating for Nucleate Boiling Heat Transfer: A Critical Review, Energies, 2018, vol. 11, no. 11, p. 3189.

    Article  Google Scholar 

  3. Dedov, A.V., A Review of Modern Methods for Enhancing Nucleate Boiling Heat Transfer, Therm. Engin., 2019, vol. 66, no. 12, pp. 881–915.

    Article  ADS  Google Scholar 

  4. Liang, G. and Mudawar, I., Review of Pool Boiling Enhancement by Surface Modification, Int. J. Heat Mass Transfer, 2019, vol. 128, pp. 892–933.

    Article  Google Scholar 

  5. Andrianov, A.B. and Malyshenko, S.P., Effect of Characteristics of Porous Coatings on Heat Transfer During Boiling, Power Engin., 1989, vol. 27, no. 1, pp. 126–135.

    Google Scholar 

  6. Hsieh, S.S. and Weng, C.J., Nucleate Pool Boiling from Coated Surfaces in Saturated R-134a and R-407c, Int. J. Heat Mass Transfer, 1997, vol. 40, no. 3, pp. 519–532.

    Article  Google Scholar 

  7. Kalita, V.I., Komlev, D.I., Komlev, V.S., and Radyuk, A.A., The Shear Strength of Three-Dimensional Capillary-Porous Titanium Coatings for Intraosseous Implants, Mater. Sci. Engin., 2016, vol. 60, pp. 255–259.

    Article  Google Scholar 

  8. Pavlenko, A.N., Tsoi, A.N., Surtaev, A.S., Kuznetsov, D.V., Kalita, V.I., Komlev, D.I., Ivannikov, A.Yu., and Radyak, A.A., Experimental Study of Rewetting of a Superheated Plate with Structured Capillary-Porous Coating by Flowing Liquid Film, High Temp., 2018, vol. 56, no. 3, pp. 404–409.

    Article  Google Scholar 

  9. Surtaev, A.S., Pavlenko, A.N., Kuznetsov, D.V., Kalita, V.I., Komlev, D.I., Ivannikov, A.Y., and Radyuk, A.A., Heat Transfer and Crisis Phenomena at Pool Boiling of Liquid Nitrogen on the Surfaces with Capillary-Porous Coatings, Int. J. Heat Mass Transfer, 2017, vol. 108, pp. 146–155.

    Article  Google Scholar 

  10. Pavlenko, A.N., Kuznetsov, D.V., and Surtaev, A.S., Experimental Study of the Influence of Structured Capillary-Porous Coatings on the Dynamics of Development of Transient Processes and the Crisis Phenomena at Stepwise Heat Release, J. Eng. Therm., 2018, vol. 27, no. 3, pp. 285–293.

    Article  Google Scholar 

  11. Surtaev, A.S., Pavlenko, A.N., Kalita, V.I., Kuznetsov, D.V., Komlev, D.I., Radyuk, A.A., and Ivannikov, A.Y., The Influence of Three-Dimensional Capillary-Porous Coatings on Heat Transfer at Liquid Boiling, Tech. Phys. Lett., 2016, vol. 42, no. 4, pp. 391–394.

    Article  ADS  Google Scholar 

  12. Surtaev, A., Kuznetsov, D., Serdyukov, V., Pavlenko, A., Kalita, V., Komlev, D., Radyuk, A., and Ivannikov, A., Structured Capillary-Porous Coatings for Enhancement of Heat Transfer at Pool Boiling, Appl. Therm. Engin., 2018, vol. 133, pp. 532–542.

    Article  Google Scholar 

  13. Kuznetsov, D.V., Pavlenko, A.N., Radyuk, A.A., Komlev, D.I., and Kalita, V.I., Features of Heat Transfer during Pool Boiling of Nitrogen on Surfaces with Capillary-Porous Coatings of Various Thicknesses, J. Eng. Therm., 2020, vol. 29, no. 3, pp. 375–387.

    Article  Google Scholar 

  14. Read, N., Wang, W., Essa, K., and Attallah, M.M., Selective Laser Melting of AlSi10Mg Alloy: Process Optimization and Mechanical Properties Development, Mater. Design (1980–2015), 2015, vol. 65, pp. 417–424.

    Article  Google Scholar 

  15. Wong, K.K., Ho, J.Y., Leong, K.C., and Wong, T.N., Fabrication of Heat Sinks by Selective Laser Melting for Convective Heat Transfer Applications, Virtual Phys. Prototyp., 2016, vol. 11, pp. 159–165.

    Article  Google Scholar 

  16. Ho, J.Y., Wong, K.K., Leong, K.C., and Wong, T.N., Convective Heat Transfer Performance of Airfoil Heat Sinks Fabricated by Selective Laser Melting, Int. J. Therm. Sci., 2017, vol. 114, pp. 213–228.

    Article  Google Scholar 

  17. Ho, J.Y., Wong, K.K., and Leong, K.C., Saturated Pool Boiling of FC-72 from Enhanced Surfaces Produced by Selective Laser Melting, Int. J. Heat Mass Transfer, 2016, vol. 99, pp. 107–121.

    Article  Google Scholar 

  18. Wong, K.K. and Leong, K.C., Saturated Pool Boiling Enhancement Using Porous Lattice Structures Produced by Selective Laser Melting, Int. J. Heat Mass Transfer, 2018, vol. 121, pp. 46–63.

    Article  Google Scholar 

  19. Kang, Z. and Wang, L., Boiling Heat Transfer on Surfaces with 3D-Printing Microstructures, Exp. Therm. Fluid Sci., 2018, vol. 93, pp. 165–170.

    Article  Google Scholar 

  20. Zhukov, V.I., Pavlenko, A.N., and Bessmeltsev, V.P., Heat Transfer at Evaporation/Boiling in the Thin Horizontal Liquid Layer on Microstructured Surfaces under Low Pressures, J. Phys.: Conf. Ser.–IOP Publ., 2019, vol. 1369, no. 1, p. 012007.

  21. Bessmeltsev, V.P., Pavlenko, A.N., and Zhukov, V.I., Development of a Technology for Creating Structured Capillary-Porous Coatings by Means of 3D Printing for Intensification of Heat Transfer during Boiling, Optoel., Instrument. Data Process., 2019, vol. 55, no. 6, pp. 554–563.

    Article  ADS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Kutateladze Institute of Thermophysics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia

    A. N. Pavlenko, D. V. Kuznetsov & V. P. Bessmeltsev

Authors
  1. A. N. Pavlenko
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. D. V. Kuznetsov
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. V. P. Bessmeltsev
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to D. V. Kuznetsov.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Pavlenko, A.N., Kuznetsov, D.V. & Bessmeltsev, V.P. Experimental Study on Heat Transfer and Critical Heat Flux during Pool Boiling of Nitrogen on 3D Printed Structured Copper Capillary-Porous Coatings. J. Engin. Thermophys. 30, 341–349 (2021). https://doi.org/10.1134/S1810232821030012

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S1810232821030012

Search

Navigation