Abstract
It is shown that for corrugated, in particular, multilayer plates, the tree-dimensional cell problem of averaging can be reduced to the two-dimensional problem on the cross section of the periodicity cell of the plate. This significantly increases the accuracy of numerical calculation of the effective stiffnesses of corrugated plates. Numerical calculations of the stiffnesses of a plate with a sinusoidal corrugation are performed, and the results are compared with available data.
Similar content being viewed by others
References
Z. Ye, V. L. Berdichevsky, and W. Yu, “An Equivalent Classical Plate Model of Corrugated Structures,” Int. J. Solids Structures 51 (11/12), 2073–2083 (2014).
Y. Xia, M. I. Friswell, and E. I. Saavedra Flores, “Equivalent Models of Corrugated Panels,” Int. J. Solids Structures 49 (13), 1453–1462 (2012).
N. Buannic, P. Cartraud, and T. Quesnel, “Homogenization of Corrugated Core Sandwich Panels,” Composite Structures 59, 299–312 (2003).
N. Talbi, A. Batti, R. Ayad, and Y. Q. Guo, “An Analytical Homogenization Model for Finite Element Modelling of Corrugated Cardboard,” Compos. Struct. 88, 280–289 (2009).
G. Bartolozzi, M. Pierini, U. Orrenius, and N. Baldanzini, “An Equivalent Material Formulation for Sinusoidal Corrugated Cores of Structural Sandwich Panels,” Compos. Struct. 100, 173–185 (2013).
V. I. Shalashilin, “Calculation of Shells Made of Corrugated Material,” Izv. Akad. Nauk SSSR, Mekh. Mashinostr. 3, 132–137 (1964).
I. V. Andrianov, A. A. Diskovsky, and E. G. Kholod, “Homogenization Method in the Theory of Corrugated Plates,” Tech. Mech. Bd 18, 123–133 (1998).
A. G. Kolpakov, “The Determination of Averaged Characteristics for Elastic Skeletons,” Prikl. Mat. Mekh. 49 (6), 969–977 (1985).
B. D. Annin, A. L. Kalamkarov, A. G. Kolpakov, and V. Z. Parton, Calculation and Design of Composite Materials and Structural Elements (Nauka, Novosibirsk, 1993) [in Russian].
D. Caillerie, “Thin Elastic and Periodic Plates,” Math. Methods Appl. Sci. 6, 159–191 (1984).
R. V. Kohn and M. Vogelius, “A New Model for Thin Plates with Rapidly Varying Thickness,” Int. J. Solids Structures 20, (4), 333–350 (1984).
T. Levinski, “Effective Stiffness of Transversaly Non-Homogeneous Plates with Univirectional Periodic Structure,” Int. J. Solids Struct. 32 (19), 3261–3287 (1995).
A. Frikha, P. Cartraud, and F. Tryssede, “MechanicalModeling of Helical Structures Accounting for Translation Invariance. Pt 1. Static Behavior,” Int. J. Solids Struct. 50 (9), 1373–1382 (2013).
M. P. Bendsøe, Optimization of Structural Topology, Shape and Material (Springer, Heidelberg, 1995).
Yu. N. Rabotnov, Mechanics of Deformed Solids (Nauka, Moscow, 1988) [in Russian].
A. G. Kolpakov, “Stiffness of Elastic Cylindrical Beams,” Prikl. Mat. Mekh. 58 (2), 102–109 (1994).
A. G. Kolpakov, Stressed Composite Structures: Homogenized Models for Thin-Walled Nonhomogeneous Structures with Initial Stresses (Springer-Verlag, Berlin, 2010).
M. T. Huber, “Die Theorie des Kreuzweise Bewehrten Eisenbetonplatten,” Bauingenier 4, 354–360 (1923).
E. Seydel, “Shear Buckling of Corrugated Plates,” Jbuch Deutschen Versuchsanstalt Luftfahrt. 9, 233–245 (1931).
L. I. Sedov, Continuum Mechanics (Nauka, Moscow, 1973), Vol. 2 [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 57, No. 4, pp. 211–223, July–August, 2016.
Rights and permissions
About this article
Cite this article
Kolpakov, A.G., Rakin, S.I. Calculation of the effective stiffnesses of corrugated plates by solving the problem on the plate cross-section. J Appl Mech Tech Phy 57, 757–767 (2016). https://doi.org/10.1134/S0021894416040209
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894416040209