Abstract
The structure and chemical composition of the local melting zones that form during explosion welding of orthorhombic titanium aluminide with commercial-purity titanium near a wavy interface between them are studied. The Rayleigh number is estimated to propose a possible mechanism for the formation of a concentric structure in these zones. Titanium aluminide fragments are detected near the zone boundaries. It is assumed that the fragmentation in the transition zone is caused by the division of a material into loosely coupled microvolumes under the action of a strong external action in a time comparable with the explosion time. Outside the transition zone, fragmentation occurs via a traditional way beginning from dislocation accumulation. Both processes occur in titanium aluminide and only one process (banded structure formation) takes place in titanium.
Similar content being viewed by others
References
V. V. Rybin, B. A. Grinberg, M. A. Ivanov, et al., “Structure of the Joint Zone between Titanium and Orthorhombic Titanium Aluminide during Explosion Welding: I. Interface,” Russian Metallurgy (Metally), No. 10, 1008–1015 (2011).
V. V. Rybin, V. A. Semenov, I. I. Sidorov, et al., “Bimetallic Compound of Orthorhombic Titanium Aluminide with a Titanium Alloy (Diffusion Welding, Explosion Welding),” Voprosy Materialovedeniya 59(3), 17–31 (2009).
V. V. Rybin, B. A. Grinberg, O. V. Antonova, et al., “Formation of Vortices during Explosion Welding (Titanium-Orthorhombic Titanium Aluminide),” Phys. Met. Metallogr. 108(4), 353–364 (2009).
B. A. Grinberg, V. V. Rybin, M. A. Ivanov, and A. M. Patselov, “Nanostructure of Vortex during Explosive Welding,” in Proceedings of the 4th International Conference NANOSMAT 2009 (Italy, 2009), p. 220.
V. V. Rybin, B. A. Grinberg, M. A. Ivanov, and A. M. Patselov, “Nanostructure of a Vortex during Explosion Welding,” in Proceedings of III All-Russia Conference NANO-2009, Yekaterinburg, Russia (Ural’skoe Izd., 2009), p. 294.
V. V. Rybin, B. A. Grinberg, M. A. Ivanov, et al., “Structure of the Transition Zone during Explosion Welding (Titanium-Orthorhombic Titanium Aluminide),” Svarka Diagnostika, No. 3, 26–31 (2010).
V. V. Rybin, B. A. Grinberg, M. A. Ivanov, et al., “Nanostructure of Vortex during Explosion Welding,” J. Nanosci. Nanotechnol. 11(10), 8885–8895 (2011).
V. V. Rybin, Large Plastic Deformation and Metal Fracture (Metallurgiya, Moscow, 1986).
A. A. Deribas, Physics of Hardening and Explosion Welding (Nauka, Novosibirsk, 1980).
L. D. Landau and E. M. Lifshitz, Theoretical Physics: Hydrodynamics 3rd ed. (Nauka, Moscow, 1986).
B. A. Grinberg and M. A. Ivanov, Ni 3 Al and TiAl Intermetallics: Microstructure, Deformation Behavior (UrO RAN, Yekaterinburg, 2002).
A. A. Godovikov, O. I. Ripinen, and S. G. Motorin, Agates (Nedra, Moscow, 1987).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © B.A. Grinberg, M.A. Ivanov, V.V. Rybin, S.V. Kuz’min, V.I. Lysak, O.A. Elkina, A.M. Patselov, O.V. Antonova, A.V. Inozemtsev, 2010, published in Deformatsiya i Razrushenie Materialov, 2010, No. 12, pp. 27–35.
Rights and permissions
About this article
Cite this article
Grinberg, B.A., Ivanov, M.A., Rybin, V.V. et al. Structure of the welding zone between titanium and orthorhombic titanium aluminide for explosion welding: II. Local melting zones. Russ. Metall. 2011, 1016–1025 (2011). https://doi.org/10.1134/S0036029511100053
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029511100053