Abstract
It was noted that in most ultrasonic tomographs for concrete products, tomograms are constructed based on the velocity of body (longitudinal, transverse) ultrasonic waves, calculated from the easily measured velocity of surface waves. However, in engineering structures exposed to climatic or other impacts, the state of the concrete structure can vary greatly from its surface to its depth, leading to errors in determining the body ultrasound velocity and, consequently, to inaccuracies in displaying defects in the structure and product dimensions. In order to improve defect location accuracy, a new reference-free method has been proposed for measuring the speed of ultrasound in the volume of large-sized engineering structures. The method employs ultrasonic antenna arrays that take advantage of the “focusing to a point” algorithm when constructing tomograms, provided that a point reflector (e.g., an access hole) is present in the product.
Similar content being viewed by others
REEFRENCES
Nerazrushayushchii kontrol’/Spravochnik v 7 t. (Nondestructive Testing/A Handbook in 7 Vols.), Klyuev, V.V., Ed., Vol. 3: Yermolov, I.N. and Lange, Yu.V., Ul’trazvukovoi kontrol’ (Ultrasonic Testing), Moscow: Mashinostroenie, 2004.
ASTM C597–16 standard: test method for pulse velocity through concrete, Book of Standards, vol. 04.02. http://www.astm.org/Standards/C597.htm
Shevaldykin, V.G., Kozlov, V.N., and Samokrutov, A.A., Inspection of concrete by ultrasonic pulse-echo tomograph with dry contact, 7th Eur. Conf. Nondestr. Test., Copengagen, May 26—29, 1998, NDTnet, August 1998, vol. 3, no. 8. http://www.ndt.net/abstract/ecndt98/131.htm
Schickert, M., Krause, M., and Müller, W., Ultrasonic imaging of concrete elements using reconstruction by synthetic aperture focusing technique, J. Mater. Civ. Eng., 2003, no. 15, pp. 235–246.
Butenko, A.I. and Shkarlet, Yu.M., On some possibilities for reference-free ultrasonic thickness gauging, in Tezisy dokl. VII Vses. konf. po nerazrushayushchemu kontrolyu (Abstr. Rep. VII All-Union Conf. Nondestr. Test.), Kiev, 1974, pp. 198—200.
Korolev, M.V., Karpelson, A.E., and Shevaldykin, V.N., Ultrasonic thickness gaging standards in the USSR, in Proc. Tenth World Conf. Nondestr. Test., Moscow, 1982, vol. 2, pp. 50–59.
Carodiskey, T.J. and Meyer, P.A., Thickness measurement in materials of unknown acoustic velocity, NDTnet, October 1997, vol. 2, no. 10. http://www.ndt.net/article/wt1097/caro2/caro2.htm
Korolev, M.A., Shevaldykin, V.G., and Karpel’son, A.E., USSR Inventor’s Certificate no. 10290007. Ultrasonic reference-free thickness gage, Byull. Izobret., no. 26, 1983.
Korolev, M.V., Karpel’son, A.E., Shevaldykin, V.G., and Starikov, B.P., USSR Inventor’s Certificate no. SU1221489A. A method for reference-free ultrasonic thickness gaging, Byull. Izobret., no. 12, 1986.
Titov, S.A., Maev, R.G., and Bogachenkov, A.N., Measuring the acoustic wave velocity and sample thickness using an ultrasonic transducer array, Tech. Phys. Lett., 2009., vol. 35, p. 1029. https://doi.org/10.1134/S1063785009110170
Bazulin, E.G. and Ismailov, G.M., Simultaneous measurement of the velocity of an ultrasonic shear wave and the thickness of a test object with plane-parallel boundaries using two antenna arrays, Russ. J. Nondestr. Test., 2013, vol. 49, no. 8, pp. 446–457.
Kachanov, V.K., Sokolov, I.V., Kontsov, R.V., and Sinitsyn, A.A., Using antenna arrays for reference-free measurement of speed of ultrasound and thickness of concrete articles, Russ. J. Nondestr. Test., 2017, vol. 53, no. 1, pp. 23–31.
Schickert, M., Towards SAFT-imaging in ultrasonic inspection of concrete, in Int. Symp. Nondestr. Test. Civ. Eng. (NDT-CE), Berlin, September, 26–28, 1995, pp. 411–418.
Kozlov, V.N., Samokrutov, A.A., and Shevaldykin, V.G., Ultrasonic flaw detection in concrete with pulse-echo method: state of the art and prospects, V Mire NK, 2002, no. 2(16), pp. 6–10.
Kachanov, V.K., Sokolov, I.V., Turkin, M.V., Shalimova, E.V., Timofeev, D.V., and Konov, M.M., Features of applying the method of focusing to a point in ultrasonic testing of products manufactured from complexly structured materials, Russ. J. Nondestr. Test., 2010, vol. 46, no. 4, pp. 258–269.
Kachanov, V.K., Kartashev, V.G., Sokolov, I.V., Voronkova, L.V., and Shalimova, E.V., Strukturnyi shum v ul’trazvukovoi defektoskopii (Structure-Borne Noise in Ultrasonic Flaw Detection), Mowcow: Moscow Power Eng. Inst., 2016.
Kartashev, V.G., Kachanov, V.K., and Shalimova, E.V., The fundamentals of the theory of spatiotemporal signal processing as applied to problems of ultrasonic flaw detection of articles from complexly structured materials, Russ. J. Nondestr. Test., 2010, vol. 46, no. 4, pp. 249–257.
Shevaldykin, V.G., Samokrutov, A.A., and Kozlov, V.N., Ultrasonic low-frequency piezoelectric transducers with dry point contact and their use for nondestructive testing, Kontrol’ Diagn., 2003, no. 2, pp. 30–39.
Kachanov, V.K., Kartashev, V.G., Sokolov, I.V., Kontsov, R.V., and Fedorov, M.B., Ul’trazvukovaya adaptivnaya mnogofunktsional’naya defektoskopiya (Ultrasonic Adaptive Multifunctional Flaw Detection), Moscow: Moscow Power Eng. Inst., 2015.
Funding
This work was carried out within the framework of implementing State Order no. 11.9879.2017/8.9 from the RF Ministry of Education and Science in the field of scientific activities.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by V. Potapchouck
Rights and permissions
About this article
Cite this article
Kachanov, V.K., Sokolov, I.V., Kontsov, R.V. et al. Using “Focusing to a Point” Algorithm for Reference-Free Measurement of the Speed of Ultrasound in Tomography of Concrete Engineering Structures. Russ J Nondestruct Test 55, 443–452 (2019). https://doi.org/10.1134/S1061830919060068
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1061830919060068