Abstract
In this study, corrosion behaviors of boronized and non-boronized AISI 316L stainless steel (AISI 316L SS) were investigated with Tafel extrapolation and linear polarization methods in different solutions (1 mol dm−3 HCl, 1 mol dm−3 NaOH and 0.9% NaCl) and in different immersion times. AISI 316L SS were boronized by using pack boronizing method for 2 and 6 hours at 800 and 900°C within commercial Ekabor®-2 powder. Surface morphologies and phase analyses of boride layers on the surface of AISI 316L SS were characterized by scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) analysis. SEM-EDS analyses show that boride layer on AISI 316L SS surface had a flat and smooth morphology. It was detected by XRD analyses that boride layer contained FeB, Fe2B, CrB, Cr2B, NiB and Ni2B phases. Boride layer thickness increases with increased boronizing temperature and time. The corrosion experiments show that boride layer significantly increased the corrosion resistance of the AISI 316L SS in 1 mol dm−3 HCl solution. While no positive effect of the boride layer was observed in the other solutions the corrosion resistance of the borid layer on AISI 316L SS was increased in all solution with the increase of the waiting periods.
Similar content being viewed by others
References
Gil, L., Brühl, S., Jiménez, L., Leon, O., Guevara, R., and Staia, M.H., Surface and Coatings Technology, 2006, vol. 201, pp. 4424–4429.
Heras, E.D.L., Egidi, D.A., Corengia, P., Santamaria, D.G., Luis, A.G., Brizvela, M., Lopez, G.A., and Martinez, M.F., Surface and Coating Technology, 2008, vol. 202, pp. 2945–2954.
Nosei, L., Farina, S., ávalos, M., Náchez, L., Gómez, B.J., and Feugeas, J., Thin Solid Films, 2008, vol. 516, pp. 1044–1050.
Yetim, A.F., Yildiz, F., Alsaran, A., and Celik, A., 2008, vol. 46, pp. 105–115.
Khelfaoui, Y., Kerkar, M., Bali, A., and Dalard, F., Surface and Coatings Technology, 2006, vol. 200, pp. 4523–4529.
Chenglong, L., Dazhi, Y., Guoqiang, L., and Min, Q., Materials Letters, 2005, vol. 59, pp. 3813–3819.
LiuT, C., Lin, G., Yang, D., and Qi, M., Surface and Coatings Technology, 2006, vol. 200, 4011–4016.
Li, M., Luo, S., Zeng, C., Shen, J., Lin, H., and Cao, C., Corrosion Science, 2004, vol. 46, pp. 1369–1380.
Azzia, M., Paquette, M., Szpunara, J.A., Klemberg-Sapiehab, J.E., and Martinu, L., Wear, 2009, vol. 267, pp. 860–866.
Morshed, M.M., McNamara, B.P., Cameron, C.D., and Hashmi, M.S.J., Surface and Coatings Technology, 2003, vols. 163–164, pp. 541–545.
Jordan, L.R., Betts, A.J., Dahm, K.L., Dearnley, P.A., and Wright, G.A., Corrosion Science, 2005, vol. 47, pp. 1085–1096.
Fedrizzi, L., Rossi, S., Bellei, F., Deflorian, and F., Wear, 2002, vol. 253, pp. 1173–1181.
Gopi, D., Collins, V.A.P., and Kavitha, L., Materials Science and Engineering C, 2009, vol. 29, pp. 955–958.
Büyüksagis, A., Ciftci, N., Ergun, Y., and Kayali, Y., Protection of Metals and Physical Chemistry of Surfaces, 2011, vol. 47, no. 5, pp. 670–679.
Kuczynska-Wydorska, M. and Flis, J., Corrosion Science, 2008, vol. 50, pp. 523–533.
Fossati, A., Borgioli, F., Galvanetto, E., and Bacci, T., Corrosion Science, 2006, vol. 48, pp. 1513–1527.
Chang, C.N. and Chen, F.S., Materials Chemistry and Physics, 2003, vol. 82, pp. 281–287.
Dearnley, P.A. and Smith, G.A., Wear, 2004, vol. 256, pp. 491–499.
Parsapour, A., Fathi, M.H., Salehi, M., Saatchi, A., and Mehdikhani, M., International Journal of ISSI, 2007, vol. 4, pp. 34–38.
Kemin, Z., Jianxin, Z., Thierry, G., Chuang, D., and Dazhi, Y., Surface and Coatings Technology, 2006, vol. 201, pp. 1393–1400.
Hryniewicz, T., Rokicki, R., and Rokosz, K., Surface and Coatings Technology, 2008, vol. 202, pp. 1668–1673.
Kariofillis, G.K., Kiourtsidis, G.E., and Tsipas, D.N., Surface and Coatings Technology, 2006, vol. 201, pp. 19–24.
Tiwari, S.K., Mishra, T., Gunjan, M.K., Bhattacharyya, A.S., Singh, T.B., and Singh, R., Surface and Coatings Technology, 2007, vol. 201, pp. 7582–7588.
Sinha, A.K., Boriding(Boronising), ASM Handbook, J. Heat Treating, 1991, vol. 4, pp. 437–447.
Özbek, İ, Şen, S., İpek, M., Bindal, C., Zeytin, S. ve and Üçışık, A.H., Vacuum C, 2004, vol. 73, pp. 643–648.
Goeuriot, F.P., Thevenot, J., and Driver, H., Surface Treatment of Steels: Boridif, a New Boriding Process, Thin Solid Films, 1981, vol. 78, pp. 67–76.
Atik, E., Yunker, U., and Meric, C., Tribology International, 2003, vol. 36, pp. 155–161.
Pertek, A. and Kulka, M., Journal of Materials Science, 2003, vol. 38, pp. 269–273.
Nama, K.S., Leea, K.H., Leeb, D.Y., and Song, Y.S., Surface and Coatings Technology, 2005, vol. 197, pp. 51–55.
Genel, K., Boriding Kinetics of H13 Steel, Vacuum, 2006, vol. 80, pp. 451–457.
Allaoui, O., Bouaouadja, N., and Saindernan, G., 2006, vol. 201, pp. 3475–3482.
Tabur, M., Izciler, M., Gulb, F., and Karacan, I., Wear, 2009, vol. 266, pp. 1106–1112.
Oliveira, C.K.N., Casteletti, L.C., Lombardi Neto, A., Totten, G.E., and Heck, S.C., Vacuum, 2010, vol. 84, pp. 792–796.
Meriç, C., Şahin, S., and ve Yılmaz, S.S., Materials Research Bulletin C, 2000, vol. 35, pp. 2165–2172.
Özbek, İ., Konduk, B.A., Bindal, C., and Ucisik, A.H., Vacuum, 2002, vol. 65, pp. 521–525.
Hünger, H.J. and True, G., Heat Treatment of Metals, 1994, vol. 2, pp. 31–39.
Taktak,.Ş, J. Mater. Sci., 2006, vol. 41, pp. 7590–7596.
Taktak,.Ş, Materials and Design, 2007, vol. 28, pp. 1836–1843.
Özdemir, O., Omar, M.A., Usta, M., Zeytin, S., Bindal, C., and Ucisik, A.H., Vacuum, 2009, vol. 83, pp. 175–179.
Campos, I., Palomar, M., Amador, A., Ganem, R., and Martinez, J., Surface and Coatings Technology, 2006, vol. 201, pp. 2438–2442.
Üneri, S., Corrosion and Its Prevention, Ankara, Turkey: Corrosion Society Publications, 2000.
Schweitzer, P.A., Fundamentals of Metallic Corrosion: Atmospheric and Media Corrosion of Metals, New York: CRC press, 2007, Chapter 1–6, 2th ed.
Liu, C., Lin, G., Yang, D., and Qi, M., Surface and Coatings Technology, 2006, vol. 200, pp. 4011–4016.
Soncu, M., Corrosion Properties of G-X10CrNiMoNb18-10 Austenitic Stainless Steel in Acidic Solutions, Master’s Thesis, Kocaeli: Kocaeli University., Institute of Sciences, 2008.
ASM Metals Handbook, ASTM Standards, 1998, 8 ed., vol. 1 and 9 ed., vol. 3.
Atay, E., Material Mechanical Properties of the Effect Of Component Design and Analysis, Master Thesis, Turkey: Uludag University, Institute of Science, Bursa, 2001.
Pardo, A., Merino, M.C., Coy, A.E., Viejo, F., Arrabal, R., and Matykina, E., Corrosion Science, 2008, vol. 50, pp. 780–794.
Author information
Authors and Affiliations
Corresponding author
Additional information
The article is published in the original.
Rights and permissions
About this article
Cite this article
Kayali, Y., Büyüksağiş, A., Güneş, I. et al. Investigation of corrosion behaviors at different solutions of boronized AISI 316L stainless steel. Prot Met Phys Chem Surf 49, 348–358 (2013). https://doi.org/10.1134/S2070205113030192
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2070205113030192