Abstract
In this paper, the nonlocal vibration analysis of plates modeled by generalized microstretch theory using Riesz–Caputo fractional derivative concept is presented. The frequency spectrum and the mode shapes of the microstretch plate with two clamped edges and two free edges for different values of the fractional continua order and the material length scale parameter are carried out. The three-dimensional vibration analysis is obtained by Ritz energy method. Moreover, the mode shapes and the absolute differences between classical and fractional eigenvectors for the first six macrofrequencies and additional microfrequencies between them are presented by using contour plots. The main contribution of the paper is that the nonlocal approach utilizing the fractional calculus gives better results compared to the experimental outcomes than the classical local theory. Besides, defining the nonlocality without using the nonlocal kernels is another advantage of the present approach. The overall conclusion is that the fractional mechanics establishes a new model for the nonlocal vibration analysis of microstretch plates.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Abbreviations
- \(a,b,h \) :
-
\({\text{Plate}}\,{\text{dimensions}}\,{\text{(m)}}\)
- \({\mathbf{u}},{{\varvec{\upphi}}},\theta \) :
-
\( {\text{Displacement}}\,{\text{vector,}}\,{\text{micro}}\,{\text{rotation}}\,{\text{vector,}}\,{\text{microstretch}}\,{\text{scalar}}\)
- \(U,\Phi ,\Theta \) :
-
\({\text{Amplitude}}\,{\text{functions}}\)
- \(\xi {,}\eta ,{\kern 1pt} \zeta \) :
-
\({\text{Non}}\,{\text{dimensional}}\,{\text{parameters}}\)
- \( \kappa \) :
-
\({\text{Micropolar}}\,{\text{constant (GPa)}}\)
- \( \overline{\alpha },\beta ,\gamma \) :
-
\({\text{Micropolar}}\,{\text{constants}}\,{\text{(GN)}}\)
- \( \lambda_{0} ,\lambda_{1} ,a_{0} \) :
-
\({\text{Microelongational}}\,{\text{constants}}\,{\text{(GN)}}\)
- \(\omega \) :
-
\({\text{Natural}}\,{\text{frequency}}\,({\text{rad/s}})\)
- \(V_{{{\text{max}}}} ,T_{{{\text{max}}}} \) :
-
\( {\text{Maximum}}\,{\text{strain}}\,{\text{and}}\,{\text{kinetic}}\,{\text{energies}}\,({\text{J}}) \)
- \(E \) :
-
\({\text{Young's}}\,{\text{modulus}}\,({\text{Pa}}) \)
- \(\nu \) :
-
\({\text{Poisson's}}\,{\text{ratio}}\)
- \(\varepsilon_{ij} \) :
-
\({\text{Strain}}\,{\text{components}}\)
- \(l \) :
-
\({\text{Length}}\,{\text{scale}}\,{\text{coefficient}} \)
- \( l_{x} ,l_{y} ,l_{z} \) :
-
\({\text{Length}}\,{\text{scale}}\,({\text{m}}) \)
- \( j \) :
-
\( {\text{Micro}}- {\text{inertia}}\,({\text{m}}^{2} )\)
- \( \rho \) :
-
\({\text{Mass}}\,{\text{density}}\,{\text{per}}\,{\text{unit}}\,{\text{volume}}\,{\text{(kg/m}}^{2} {)} \)
- \(P_{i} (x) \) :
-
\( {\text{ith}}\,{\text{Chebyshev}}\,{\text{polynomial}}\)
- \(F_{i} (\xi ,\eta )\) :
-
\( {\text{Boundary}}\,{\text{functions}} \)
- \( {\mathbf{K,M}} \) :
-
\({\text{Stiffness}}\,{\text{and}}\,{\text{mass}}\,{\text{matrices}}\)
- \({\mathbf{Z}} \) :
-
\({\text{Column}}\,{\text{vector}}\)
- \(D\) :
-
\( {\text{Flexural}}\,{\text{rigidity}}\,{\text{of}}\,{\text{the}}\,{\text{plate}}\,{\text{(kg}}/{\text{m}}^{2} {\text{/s}}^{2}) \)
References
A.C. Eringen, D.G.B. Edelen, Int. J. Eng. Sci 10, 233–248 (1972)
S.A. Faghidian, Math. Meth. Appl. Sci. (2020). https://doi.org/10.1002/mma.6877
S.A. Faghidian, Int. J. Eng. Sci. 154, 103337 (2020). https://doi.org/10.1016/j.ijengsci.2020.103337
S.A. Faghidian, Math Meth Appl Sci. (2020). https://doi.org/10.1002/mma.6885
C.M. Chong, PhD thesis, The Hong Kong University of Science and Technology (2002)
G. Cottone, M. Di Paola, M. Zingales, Physica E. Low. Dimens. Syst. Nanostruct. 42, 95–103 (2009)
A. Khurana, S.K. Tomar, Ultrasonics 73, 162–168 (2017)
A.C. Eringen, J. Appl. Phys. 54, 4703–4710 (1983)
A.C. Eringen, Int. J. Eng. Sci. 22, 1113–1121 (1984)
K.A. Lazopoulos, Mech. Res. Commun. 33, 753–757 (2006)
T.M. Atanackovic, B. Stankovic, Acta Mech. 208, 1–10 (2009)
S. Aydinlik, A. Kiris, AIAA J. 58, 355–361 (2020)
W. Sumelka, Bull. Pol. Acad. Tech. 64, 361–372 (2016)
W. Sumelka, Arch. Civ. Mech. Eng. 15(1), 231–242 (2015)
D. Zhou, Y.K. Cheung, F.T.K. Au, S.H. Lo, Int. J. Solids Struct. 39(26), 6339–6353 (2002)
C.H. Huang, C.C. Ma, J. Vib. Acoustics 123, 276–284 (2001)
G.S.F. Frederico, D.F.M. Torres, Appl. Math. Comput. 217, 1023–1033 (2010)
Z. Odibat, Appl. Math. Comput. 178, 6527–6533 (2006)
J.S. Leszczynski, Monographs No. 198; The Publishing Office of Czestochowa University of Technology, (2011)
W. Sumelka, J. Therm. Stress. 37(6), 678–706 (2014)
S.A. Faghidian, Int. J. Solids Struct. 51(25–26), 4427–4434 (2014)
S.A. Faghidian, Strain Anal. Eng. Des. 50(2), 84–91 (2015)
F.Y. Wang, Y. Zhou, J. Sound Vib. 146, 1–16 (1991)
A. Kiris, E. Inan, Int. J. Eng. Sci. 46, 585–597 (2008)
Acknowledgements
This work was supported by the National Science Centre, Poland, under Grant No. 2017/27/B/ST8/00351.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Aydinlik, S., Kiris, A. & Sumelka, W. Nonlocal vibration analysis of microstretch plates in the framework of space-fractional mechanics—theory and validation. Eur. Phys. J. Plus 136, 169 (2021). https://doi.org/10.1140/epjp/s13360-021-01110-x
Received:
Accepted:
Published:
DOI: https://doi.org/10.1140/epjp/s13360-021-01110-x