Abstract
Based on resultant solution of a two-dimensional (2D) Poisson's equation in the silicon region, a new analytical model for short-channel fully depleted, symmetrical dual-material double-gate (SDMDG) metal–oxide–semiconductor field effect transistors (MOSFETs) has been developed. The SDMDG MOSFET exhibits significantly reduced short-channel effects (SCEs) when compared with the symmetrical double-gate (SDG) MOSFET due to the step potential profile at the interface between different gate materials. It is found that the threshold voltage roll-off can be effectively reduced using both the thin Si film and thin gate oxide. A considerable portion of the large workfunction of metal gate 1 (M1) when laterally merged with the small workfunction of metal gate 2 (M2) can efficiently suppress drain-induced barrier lowering (DIBL) and maintain the low threshold voltage degradation. In this work, not only a precise 2D analytical model of the surface potential and threshold voltage is presented, but also the minimum surface potential in M1 of the shorter channel device that brings about subthreshold swing degradation for the SDMDG MOSFET is discussed. The new model is verified to be in good agreement with numerical simulation results over a wide range of device parameters.