Abstract
The MixAlco process is a patented technology that converts any biodegradable material (e.g., sorted municipal solid waste, sewage sludge, industrial biosludge, manure, agricultural residues, energy crops) into mixed alcohol fuels containing predominantly 2-propanol, but also higher alcohols up to 7-tridecanol. The feed stock is treated with lime to increase its digestibility. then, it is fed to a fermentor in which a mixed culture of acid-forming microorganisms produces carboxylic acids. Calcium carbonate is added to the fermentor to neutralize the acids to their corresponding carboxylate salt. The dilute (−3%) carboxylate salts are concentrated to 19% using an amine solvent that selectively extracts water. Drying is completed using multi-effect evaporators. Finally, the dry salts are thermally converted to ketones which subsequently are hydrogenated to alcohols. All the steps in the MixAlco process have been proven at the laboratory scale. A techno-economic model of the process indicates that with the tipping fees available in New York ($126/dry tonne), mixed alcohol fuels may be sold for $0.04/L ($0.16/gal) with a 60% return on investment (ROI). With the average tipping fee in the United States rates ($63/dry tonne), mixed alcohol fuels may be sold for $0.18/L ($0.69/gal) with a 15% ROI. In the case of sugarcane bagasse, which may be obtained for about $26/dry ton, mixed alcohol fuels may be sold for $0.29/L ($1.09/gal) with a 15% ROI.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Ghose, T. K. and Bhadra, A. (1985), in Comprehensive Biotechnology, vol. 3, Moo-Young, M., Blanch, H. W., Drew, S., and Wang, D. I. C., eds, Pergamon Press, New York, NY, pp. 701–729.
Playne, M. J. (1985), in Comprehensive Biotechnology, vol. 3, Moo-Young, M., Blanch, H. W., Drew, S., and Wang, D. I. C., eds., Pergamon Press, New York, NY, pp. 731–759.
Lefranc, L. (1914), British Patent 17,776.
Hurd, C. D. (1929), The Pyrolysis of Carbon Compounds, The Chemical Catalog Company, New York, NY, p. 486.
Playne, M. I. (1981), in Advances in Biotechnology, vol. II, Moo-Young, M. and Robinson, C. W., eds., Pergamon Press, New York, NY, pp. 85–90.
Badawi, M. A., El-Shinnawi, M. M., Blanc, F. C., Wise, D. L., and El-Shimi, S. A. (1992), Resources, Conservation and Recycling 7, 201–212.
Holtzapple, M. T., Davison, R. R., and Nagwani, M. (1997), U. S. Patent 5,693,296.
Chang, V. S., Burr, B., and Holtzapple, M. T. (1997), Appl. Biochem. Biotechnol. 63–65, 3–19.
Kaar, W. E. and Holtzapple, M. T., Biomass Bioenergy, in press.
Chang, V. S., Holtzapple, M. T., and Davison, R. R. (1996), Final Report Part III, Subcontract No. XAW-3-11181-03, National Renewable Energy Laboratory, Golden, CO.
Chang, V. S., Nagwani, M., and Holtzapple, M. T., Appl. Biochem. Biotechnol., in press.
Holtzapple, M. T., Ross, M. K., Chang, N.-S., Chang, V. S., Adelson, S. K., and Brazel, C. (1997), in Fuels and Chemicals from Biomass, ACS Symposium Series666, Saha, B. C. and Woodward, J., eds., American Chemical Society, Washington, DC, pp. 130–141.
Rapier, C. R. (1995), Masters thesis, Texas A&M University, College Station, TX.
Gandi, J., Holtzapple, M. T., Ferrer, A., Byers, F. M., Turner, N. D., Nagwani, M., and Chang, S. (1997), Animal Feed Sci. Technol. 68, 195–211.
Holtzapple, M. T., Davison, R. R., Ross, M. K., and Loescher, M., U.S. Patent (granted but not issued).
Slyter, L. L. (1979), Appl. Envir. Microbiol 37, 283–288.
Martin, S. A. and Macy, J. M. (1985), J. Animal Sci. 60, 544–550.
Mike Piana, Exxon, Baytown, TX, personal communication.
Chris Hodgson, Natgun Tanks, Wakefield, MA, personal communication.
Loescher, M. E. (1996), PhD dissertation, Texas A&M University, College Station, TX.
Ross, M. K. (1998), PhD dissertation, Texas A&M University, College Station, TX.
Davison, R. R., Smith, W. H., and Hood, D. W. (1966), J. Chem. Eng. Data 11, 304–309.
Davison, R. R. and Hood, D. W. (1964), I&EC Proc. Design Dev. 3, 399–404.
Chun, K. W., Drummond, J. C., and Davison, R. R. (1974), J. Chem. Eng. Data 19, 142–144.
Chun, K. W., Clinkscales, T. C., and Davison, R. R. (1971), J. Chem. Eng. Data 16, 443–446.
Davison, R. R., Smith, W. H., and Hood, D. W. (1960), J. Chem. Eng. Data 5, 420–423.
Davison, R. R., Harris, W. B., and Smith, W. H., Jr. (1967), Desalination 3, 17–26
Lee, C. (1993), Masters thesis, Texas A&M University, College Station, TX.
Gaskin, D. J. (1997), Masters thesis, Texas A&M University, College Station, TX.
Ardagh, E. G. R., Barbour, A. D., McClellan, G. E., and McBride, E. W. (1924), Ind. Eng. Chem. 16, 1133–1139.
Adelson, S. K. (1994), Masters thesis, Texas A&M University, College Station, TX.
Chang, N.-S., Aldrett-Lee, S., Holtzapple, M. T., and Davison, R. R., Ind. Eng. Chem. Res., submitted.
Goffe, B. E., Ferrier, A. E., and Rogers, C. L. (1994), J. Econometr. 60, 64–100.
Brehm, A. and Oguz, H. (1988), Proceedings of the 6th European Conference on Mixing, Pavia, Italy, BHRA Fluid Engineering, 413–420.
Peters, M. S., and Timmerhaus, K. D. (1991), Plant Design and Economics for Chemical Engineers, 4th ed., McGraw-Hill, New York, NY.
Magnuson, A. (1997), MSW Management, 30–41.
Broder, J. D., Eley, M. H., and Barrier, J. W. (1993), Municipal Solid Waste and Waste Cellulosics Conversion to Fuels and Chemicals, vol. II, Tennessee Valley Authority, Muscle Shoals, AL.
Holtzapple, M. T., Lundeen, J. E., Sturgis, R., Lewis, J. E., and Dale, B. E. (1992), Appl. Biochem. Biotechnol. 34/35, 5–21.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Holtzapple, M.T., Davison, R.R., Ross, M.K. et al. Biomass conversion to mixed alcohol fuels using the MixAlco process. Appl Biochem Biotechnol 79, 609–631 (1999). https://doi.org/10.1385/ABAB:79:1-3:609
Issue Date:
DOI: https://doi.org/10.1385/ABAB:79:1-3:609