Application of the X-ray micro-computed tomography to the analysis of the structure of polymeric materials

Piotr P. Szewczykowski; Łukasz Skarżyński

doi:10.14314/polimery.2019.1.2

Published : 2021-01-12

Vol. 64 No. 1 (2019)

Application of the X-ray micro-computed tomography to the analysis of the structure of polymeric materials

Piotr P. Szewczykowski Łukasz Skarżyński

DOI: https://doi.org/10.14314/polimery.2019.1.2

Abstract

In this paper the application of X-ray micro-computed tomography (micro-CT) as a non-destructive testing method of polymeric materials is presented. Increasing applicability of polymers in variedend-use industries such as automotive, building and construction, consumer goods, and packaging is propelling the growth of the global polymer processing market. However, controlling of the polymer structure is one of the most important aspects since it affects mechanical properties of the components. The paper contains examples of two- and three-dimensional analysis of selected polymeric materials using of X-ray micro-computed tomography. Due to the complex structure of polymers, their shape and pores that are embedded inside the material and are not connected to the surface, the X-ray micro-computed tomography is an ideal solution for the analysis of the microstructure of polymeric materials to improve the process of their production in order to obtain components with the best possible properties.

Keywords

microstructure ; non-destructive test ; polymeric materials ; X-ray micro-CT mikrostruktura ; badanie bezinwazyjne ; materiały polimerowe ; mikrotomografia komputerowa

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Szewczykowski, P. P., & Skarżyński, Łukasz. (2021). Application of the X-ray micro-computed tomography to the analysis of the structure of polymeric materials. Polimery, 64(1), 12-22. https://doi.org/10.14314/polimery.2019.1.2

References

Pauwels E., Van Loo D., Cornillie P. et al.: Journal of Microscopy 2013, 250, 21.
Crossref

[2] Bannerman A., Paxton J.Z., Grover L.M.: Biotechnology Letters 2014, 36, 403.
Crossref

[3] Svensson C.M., Hoffmann B., Irmler I.M. et al.: Scientific Reports 2017, 7, 1.
Crossref

[4] Onelli O., Kamp T., Skepper J. et al.: Scientific Reports 2017, 7, 1.
Crossref

[5] Channagiri S.A., Nagpure S.C., Babu S.S. et al.: Journal of Power Sources 2013, 243, 750.
Crossref

[6] Cantre D., Herremans E., Verboven P. et al.: Innovative Food Science and Emerging Technologies 2014, 24, 28.
Crossref

[7] Laverse J., Mastromatteo M., Frisullo P., Del Nobile M.A.: Journal of Dairy Science 2011, 94, 43.
Crossref

[8] Mathieu V., Monnet A.F., Jourdren S. et al.: Food & Function 2016, 7, 3577.
Crossref

[9] Alam T., Takhar P.S.: Journal of Food Science 2016, 81, 651.
Crossref

[10] Bubeck A., Walker R.J., Healy D. et al.: Earth and Planetary Science Letters 2017, 457, 38.
Crossref

[11] Otani J., Watanabe Y., Chevalier B.: IOP Conference Series: Materials Science and Engineering 2010, 10, 1.
Crossref

[12] Joffre T., Isaksson P., Dumont P.J.J. et al.: Experimental Mechanics 2016, 56, 723.
Crossref

[13] Elliott J.C., Dover S.D.: Journal of Microscopy 1982, 126, 211.
Crossref

[14]
Crossref (access date 14.02.2018)

[15] Boas F.E., Fleischmann D.: Imagining in Medicine 2012, 4, 229.
Crossref

[16] Skyscan NV (2011) Nrecon User Manual 4/20/2011.

[17] Bossi R.H., Georgeson G.E.: Materials Evaluation 1995, 53, 1198.

[18] Evans N.T., Irvin C.W., Safranski D.L., Gall K.: Journal of the Mechanical Behavior of Biomedical Materials 2016, 59, 459.
Crossref

[19] Elmoutaouakkil A., Fuchs G., Bergounhon P. et al.: Journal of Physics D: Applied Physics 2003, 36, A37.
Crossref

[20] Viot P., Bernard D., Plougonven E.: Journal of Materials Science 2007, 42, 7202.
Crossref

[21] Smolná K., Gregor T., Kosek J.: European Polymer Journal 2013, 49, 3966.
Crossref

[22] Lin A.S.P., Barrows T.H., Cartmell S.H. et al.: Biomaterials 2003, 24, 481.
Crossref

[23] Wu H.B., Haugen H.J., Wintermantel E.: Journal of Cellular Plastics 2012, 48, 141.
Crossref

[24] Pyun A., Bell J.R., Won K.H.: Macromolecules 2007, 40, 2029.
Crossref

[25] Kocic N., Kretschmer K., Bastian M., Heidemeyer P.: Journal of Applied Polymer Science 2012, 126, 1207.
Crossref

[26] Salasinska K., Polka M., Gloc M. et al.: Polimery 2016, 61, 255.
Crossref

[27] Di Giuseppe E., Castellani R., Dobosz S. et al.: Composites Part A: Applied Science and Manufacturing 2016, 90, 320.
Crossref

[28] Awal A., Rana M., Sain M.: Mechanics of Materials 2015, 80, 87.
Crossref

[29] Graupner N., Beckmann F., Wilde F.: Journal of Materials Science 2014, 49, 450.
Crossref

[30] Alemdar A., Zhang H., Sain M.: Advanced Engineering Materials 2008, 10, 126.
Crossref

[31] Han Y., Qi D.W., Guan S.Y.: Advanced Materials Research 2012, 428, 57.
Crossref

[32] Sliwa F., El Bounia N.E., Charrier F.: Composites Science and Technology 2012, 72, 1733.
Crossref

[33] Joffre T., Miettinen A., Berthold F.: Composites Science and Technology 2014, 105, 127.
Crossref

[34] Nguyen Thi T.B., Morioka M., Yokoyama A.: Journal of Materials Processing Technology 2015, 219, 1.
Crossref

[35] Ayadi A., Nouri H., Guessasma S.: Composite Structures 2015, 125, 277.
Crossref

[36] Bernasconi A., Cosmi F., Zappa E.: Strain 2010, 46, 435.
Crossref

[37] Bernasconi A., Cosmi F., Hine P.J.: Composites Science and Technology 2012, 16, 2002.
Crossref

[38] Kleindel S., Salaberger D., Eder R.: International Polymer Processing 2015, 30, 366.
Crossref

[39] Nciri M., Notta-Cuvier D., Lauro F. et al.: Composite Structures 2017, 160, 516.
Crossref

[40] Ontiveros S., Yagüe-Fabra J.A., Jiménez R.: Measurement Science and Technology 2012, 23, 1.
Crossref

[41] Biglione J., Bereaux Y., Charmeau J.Y.: “Injection blow moulding single stage process: Validation of the numerical simulation through tomography analysis” AIP Conference Proceedings, Nantes, France 2016,vol. 1769, 020012.
Crossref

[42] Masters J.E.: American Society for Testing and Materials 1992, 35.
Crossref

[43] Wright P., Fu X., Sinclair I. et al.: Journal of Composite Materials 2008, 42, 1993.
Crossref

[44] ElAgamy N., Laliberté J., Gaidies F.: Journal of Composite Materials 2016, 50, 2523.
Crossref

[45] Sket F., Seltzer R., Molina-Aldareguía J.M.: Composites Science and Technology 2012, 72, 350.
Crossref

[46] Selles N., Saintier N., Laiarinandrasana L.: International Journal of Plasticity 2016, 86, 112.
Crossref

[47] Rolland H., Saintier N., Robert G.: Composites Part B: Engineering 2016, 90, 365.
Crossref

[48] Arif M.F., Meraghni F., Chemisky Y.: Composites Part B: Engineering 2014, 58, 487.
Crossref

[49] Croom B., Wang W.M., Li J., Li X.: Experimental Mechanics 2016, 56, 999.
Crossref

[50] Safriet S., Quick T., Mollenhauer D. et al.: “Three--Dimensional Analysis of Damage Propagation in Unidirectional Polymer Composites using X-ray Computed Tomography and Digital Volume Correlation”, 30th Technical Conference of the American Society for Composites 2015, 2449.

[51] Buffiere J.Y., Maire E., Adrien J. et al.: Proceedings of the Society for Experimental Mechanics, Inc. 2010, 67, 289.

[52] Laiarinandrasana L., Morgeneyer T.F., Proudhon H., Regrain C.: Journal of Polymer Science, Part B: Polymer Physics 2010, 48, 1516.
Crossref

[53] Nouri H., Guessasma S., Belhabib S.: Journal of Materials Processing Technology 2016, 234, 113.
Crossref

[54] Gapinski B., Wieczorowski M., Grzelka M.: Polimery 2017, 62, 53.
Crossref

[55] Wagner L., Ponto-Wolska M., Raszewski Z.: Polimery 2016, 61, 831.
Crossref

[56] Wagner L., Ponto-Wolska M., Raszewski Z.: Polimery 2017, 62, 875.
Crossref

Google Scholar

Altmetric indicators

Citing articles via

CITEDBY SCOPUS

Statistics

Total abstract views : 220

PDF Downloads : 158

Piotr P. Szewczykowski piotr.szewczykowski@utp.edu.pl

Affiliation
UTP University of Science and Technology, Department of Materials Engineering and Polymer Processing, Faculty of Mechanical Engineering, Al. prof. S. Kaliskiego 7, 85-796 Bydgoszcz, Poland

Łukasz Skarżyński

Affiliation
Gdańsk University of Technology, Department of Building Structures and Material Engineering, Faculty of Civil and Environmental Engineering, G. Narutowicza 11/12, 80-233 Gdańsk, Poland