Abstract
There is increasing awareness of the durability, dimensional stability, and strength properties of thermally modified timber products. Appropriate standards and test methods for industrial-scale quality control are needed. The aim of this study was to investigate the suitability of CIE L*a*b* color measurements for implementation in industrial quality control. Good linear correlation was found between a cumulated measure of L* and b* data and the heat treatment intensity for spruce (Picea abies Karst.), pine (Pinus sylvestris L.), and beech (Fagus sylvatica L.). Wood samples homogenized by milling revealed less variation in color values compared to wood surface measurements. Thus, measurements on milled wood are recommendable to obtain results with high statistical significance. Color measurements are rapid, precise, and highly reproducible. Based on the strong correlation between color data and heat-treatment intensities, color measurements could easily be implemented for quality control of thermally modified timber.
References
Ayadi, N., Lejeune, F., Charrier, F., Charrier, B., Merlin, A. (2003) Color stability of heat-treated wood during artificial weathering. Holz Roh Werkst.61:221–226.10.1007/s00107-003-0389-2Search in Google Scholar
Bekhta, P., Niemz, P. (2003) Effect of high temperature on the change in color, dimensional stability and mechanical properties of spruce. Holzforschung57:539–546.10.1515/HF.2003.080Search in Google Scholar
Bengtsson, C., Jermer, J., Brem, F. (2002) Bending strength of heat-treated spruce and pine timber. Document No. IRG/WP 02-40242. International Research Group on Wood Protection, Stockholm, Sweden.Search in Google Scholar
Bourgois, P.J., Janin, G., Guyonnet, R. (1991) La mesure de couleur. Une methode d'etude et d'optimisation des transformations chimiques du bois thermolyse. Holzforschung45:377–382.Search in Google Scholar
Brischke, C., Rapp, A.O., Welzbacher, C.R. (2006) High-energy multiple impact (HEMI) test – Part 1: A new tool for quality control of thermally modified timber. International Research Group on Wood Protection, Stockholm, Sweden, in press.Search in Google Scholar
Burmester, A. (1973) Einfluss einer Wärme-Druck-Behandlung halbtrockenen Holzes auf seine Formbeständigkeit. Holz Roh Werkst.31:237–243.10.1007/BF02607268Search in Google Scholar
Buro, A. (1954) Die Wirkungen von Hitzebehandlungen auf die Pilzresistenz von Kiefern- und Buchenholz. Holz Roh Werkst.12:297–304.10.1007/BF02606056Search in Google Scholar
Hill, C. (2006) Commercial aspects of thermal modification. In: Seminar on wood modification – opportunities and challenges, 9 February 2006, Limerick, Ireland. National Council for Forest Research & Development (COFORD) (http://www.coford.ie/iopen24/pub/defaultarticle.php?cArticlePath=129_205_323).Search in Google Scholar
Homann, W.J., Tjeerdsma, B. (2005) Control systems, quality assessment and certification of modified wood for market introduction. In: Proceedings of the 2nd European Conference on Wood Modification, 6–7 October 2005, Göttingen. Eds. Militz, H., Hill, C. University of Göttingen, Germany. pp. 382–389.Search in Google Scholar
Jämsä, S., Viitaniemi, P. (2001) Heat treatment of wood – Better durability without chemicals. In: Review on heat treatments of wood. Proceedings of the special seminar on heat treatments, 9 February 2001, Antibes, France. Ed. Rapp, A.O. Office for Official Publications of the European Communities, Luxembourg. pp. 17–22.Search in Google Scholar
Johansson, D., Morén, T. (2006) The potential of colour measurements for strength prediction of thermally treated wood. Holz Roh Werkst.64:104–110.10.1007/s00107-005-0082-8Search in Google Scholar
Jones, D. (2006) Irish timber potential. In: Seminar on wood modification – opportunities and challenges, 9 February 2006, Limerick, Ireland. National Council for Forest Research & Development (COFORD) (http://www.coford.ie/iopen24/pub/defaultarticle.php?cArticlePath=129_205_323).Search in Google Scholar
Kamdem, D.P., Pizzi, A., Jermannaud, A. (2002) Dauerhaftigkeit von hitzebehandeltem Holz. Durability of heat-treated wood. Holz Roh Werkst.60:1–6.Search in Google Scholar
Mayes, D., Oksanen, O. (2002) ThermoWood® Handbook, version 1.0, Finnish Thermowood Association, Helsinki, Finland (http://www.thermowood.fi/data.php/200312/795460200312311156_tw_handbook.pdf).Search in Google Scholar
Militz, H., Tjeerdsma, B. (2001) Heat treatment of wood by the PLATO process. In: Review on heat treatments of wood. Proceedings of the special seminar on heat treatments, 9 February 2001, Antibes, France. Ed. Rapp, A.O. Office for Official Publications of the European Communities, Luxembourg. pp. 23–33.Search in Google Scholar
Mitsui, K., Takada, H., Sugiyama, M., Hasegawa, R. (2001) Changes in the properties of light-irradiated wood with heat treatment. Part 1. Effect of treatment conditions on the change in color. Holzforschung55:601–605.Search in Google Scholar
Patzelt, M., Emsenhuber, G., Stingl, R. (2003) Colour measurements as means of quality control of thermally treated wood. In: Proceedings of the 1st European Conference on Wood Modification, 3–4 April 2003, Ghent. Eds. Van Acker, J., Hill, C., Ghent University, Belgium. pp. 213–218.Search in Google Scholar
Rapp, A.O., Sailer, M. (2001) Oil-heat treatment of wood in Germany – State of the art. In: Review on heat treatments of wood. Proceedings of the special seminar on heat treatments, 9 February 2001, Antibes, France. Ed. Rapp, A.O. Office for Official Publications of the European Communities, Luxembourg. pp. 47–64.Search in Google Scholar
Rapp, A.O., Sailer, M., Brand, K. (2003) Umweltfreundliche Konservierung von Massivholz und Massivholzprodukten für den Außenbereich. Schlussbericht für das BMBF-Projekt 0339862. Bundesforschungsanstalt für Forst- und Holzwirtschaft (BFH), Hamburg.Search in Google Scholar
Rapp, A.O., Brischke, C., Welzbacher, C.R. (2006) Interrelationship between the severity of heat treatments and sieve fractions after impact ball milling: a mechanical test for quality control of thermally modified wood. Holzforschung60:64–70.10.1515/HF.2006.012Search in Google Scholar
Schwanninger, M., Hinterstoisser, B., Gierlinger, N., Wimmer, R., Hanger, J. (2004) Application of Fourier transform near infrared spectroscopy (FT-NIR) to thermally modified wood. Holz Roh Werkst.62:483–485.10.1007/s00107-004-0520-zSearch in Google Scholar
Seborg, R.M., Tarkow, H., Stamm, A.J. (1953) Effect of heat upon dimensional stabilisation of wood. J. For. Prod. Res. Soc.3:59–67.Search in Google Scholar
Stamm, A.J. (1956) Thermal degradation of wood and cellulose. Ind. Eng. Chem.48:413–417.10.1021/ie51398a022Search in Google Scholar
St-Onge, V., Fortin, Y., Tremblay, C.I. (2005) Quality control of thermally modified Balsam fir. In: Proceedings of the 2nd European Conference on Wood Modification, 6–7 October 2005, Göttingen. Eds. Militz, H., Hill, C., University of Göttingen, Germany. pp. 53–56.Search in Google Scholar
Sundqvist, B. (2004) Colour changes and acid formation in wood during heating. Doctoral thesis, Luleå University of Technology, Sweden.Search in Google Scholar
Syrjänen, T. (2001) Production and classification of heat treated wood in Finland. In: Review on heat treatments of wood. Proceedings of the special seminar on heat treatments, 9 February 2001, Antibes, France. Ed. Rapp, A.O. Office for Official Publications of the European Communities, Luxembourg. pp. 7–15.Search in Google Scholar
Tolvaj, L., Faix, O. (1995) Artificial ageing of wood monitored by DRIFT spectroscopy and CIE L*a*b* color measurements. 1. Effect of UV light. Holzforschung49:397–404.Search in Google Scholar
Vernois, M. (2001) Heat treatment of wood in France – State of the art. In: Review on heat treatments of wood. Proceedings of the special seminar on heat treatments, 9 February 2001, Antibes, France. Ed. Rapp, A.O. Office for Official Publications of the European Communities, Luxembourg. pp. 35–42.Search in Google Scholar
Viitaniemi, P., Jämsä, S. (2001) Method of determining the degree of modification of a heat modified wood product. World patent WO-01/53812A1.Search in Google Scholar
Viitanen, H., Jämsa, S., Paajanen, L., Nurmi, A., Viitaniemi, P. (1994) The effect of heat treatment on the properties of spruce. A preliminary report. Document No. IRG/WP 94-40032. International Research Group on Wood Protection, Stockholm, Sweden.Search in Google Scholar
Wahl, P., Simonaho, S.-P., Pakarinen, T., Silvennoinen, R. (2004) Effect of heat-treatment on scattering of laser light from wood grains. Holz Roh Werkst.62:343–345.10.1007/s00107-004-0511-0Search in Google Scholar
Welzbacher, C.R., Rapp, A.O. (2003) Thermische Verfahren – Verfahrensübergreifender Vergleich. In: 23. Holzschutz-Tagung der DGfH, Augsburg, 26–27 March 2003. Deutsche Gesellschaft für Holzforschung e.V., Munich. pp. 97–112.Search in Google Scholar
Wienhaus, O. (1999). Modifizierung des Holzes durch eine milde Pyrolyse – abgeleitet aus den allgemeinen Prinzipien der Thermolyse des Holzes. Wiss. Z. Tech. Univ. Dresden48:17–22.Search in Google Scholar
©2007 by Walter de Gruyter Berlin New York