Abstract
The present study elucidates the influence of Mo content on the microstructure – toughness relationship in the coarsegrained heat-affected zone of high-strength low-alloy steels. The low-Mo and high-Mo steels were subjected to 100 kJ cm–1 heat input welding thermal cycling. The results indicated that (Ti,Mo)-carbonitrides were formed in high-Mo steel, whereas (Ti,Nb)-carbonitrides were formed in low-Mo steel. The finer and dispersed precipitates in high-Mo steel refined the prior austenite grain in the coarse-grained heat-affected zone based on the grain boundary pinning effect. However, the smaller prior austenite grain and excessive Mo content induced the formation of an entirely bainitic microstructure in high-Mo steel. Furthermore, a higher fraction of martensite –austenite constituents was observed in high-Mo steel. These results could be responsible for the deterioration of the toughness in the coarse-grained heat-affected zone of high-Mo steel.
References
[1] Z.J. Xie, C.J. Shang, X.L. Wang, X.M. Wang, G. Han, R.D.K. Misra: Int. J. Min. Met. Mater. 27 (2020) 1. DOI:10.1007/s12613-019-1939-x10.1007/s12613-019-1939-xSearch in Google Scholar
[2] M. Minagawa, K. Ishida, Y. Funatsu, S. Imai: Nippon Steel Tech. Rep. 90 (2004) 7.Search in Google Scholar
[3] Y. Kitagawa, H. Kawasaki: Kobelco Techn. Rev. 32 (2013) 1.Search in Google Scholar
[4] L.Y. Xu, J. Yang, R.Z. Wang, Y.N. Wang, W.L. Wang: Metall. Mater. Trans. A, 47A (2016) 3354. DOI:10.1007/s11661-016-3535-210.1007/s11661-016-3535-2Search in Google Scholar
[5] K. Sakata, H. Suito: Metall. Mater. Trans. A, 31A, (2000) 1213. DOI:10.1007/s11661-000-0117-z10.1007/s11661-000-0117-zSearch in Google Scholar
[6] X.L. Wan, K.M. Wu, G. Huang, R. Wei, L. Cheng: Int. J. Min. Met. Mater. 21 (2014) 878. DOI:10.1007/s12613-014-0984-810.1007/s12613-014-0984-8Search in Google Scholar
[7] X.L. Wan, K.M. Wu, G. Huang, K.C. Nune, Y. Li, L. Cheng: Sci. Technol. Weld. Joi. 21 (2016) 295. DOI:10.1080/13621718.2015.110409810.1080/13621718.2015.1104098Search in Google Scholar
[8] J.R. Yang, C.Y. Huang, C.F. Huang: J. Mater. Sci. Lett. 12 (1993) 1290. DOI:10.1007/BF0050634110.1007/BF00506341Search in Google Scholar
[9] X.L. Wan, H.H. Wang, L. Cheng, K.M. Wu: Mater. Charact. 67 (2012) 41. DOI:10.1016/j.matchar.2012.02.00710.1016/j.matchar.2012.02.007Search in Google Scholar
[10] Y Shen, X.L. Wan, Y. Liu, G.Q. Li, Z.L. Xue, K.M. Wu: Ironmak. Steelmak. 46 (2018) 584. DOI:10.1080/03019233.2018.153360810.1080/03019233.2018.1533608Search in Google Scholar
[11] Y. Liu, G. Li, X. Wan, X. Zhang, Y. Shen, K.M. Wu: Ironmaking Steelmaking (2017). DOI:10.1080/03019233.2017.135376310.1080/03019233.2017.1353763Search in Google Scholar
[12] X.L. Wang, Y.R. Nan, Z.J. Xie, Y.T. Tsai, J.R. Yang, C.J. Shang: Mat. Sci. Eng. A, 702 (2017) 196. DOI:10.1016/j.msea.2017.06.08110.1016/j.msea.2017.06.081Search in Google Scholar
[13] X.D. Li, Y.R. Fan, X.P. Ma, S.V. Subramanian, C.J. Shang: Mater. Design., 67 (2015) 457. DOI:10.1016/j.matdes.2014.10.02810.1016/j.matdes.2014.10.028Search in Google Scholar
[14] J.H. Shim, J.S. Byun, Y.W. Cho, Y.J. Oh, J.D. Shim, D.N. Lee: Scripta Mater. 44 (2001) 49. DOI:10.1016/S1359-6462(00)00560-110.1016/S1359-6462(00)00560-1Search in Google Scholar
[15] X.D. Zou, J.C. Sun, H. Matsuura, C. Wang: Metall. Mater. Trans. B, 49 (2018) 2168. DOI:10.1007/s11663-018-1326-410.1007/s11663-018-1326-4Search in Google Scholar
[16] M.M. Song, B. Song, S.H. Zhang, Z.L. Xue, Z.B. Yang, R.S. Xu: ISIJ Int. 57 (2017) 1261. DOI: 10.2355/isijinternational.ISIJINT-2017-03710.2355/isijinternational.ISIJINT-2017-037Search in Google Scholar
[17] A.M. Guo, S.R. Li, J. Guo, P.H. Li, Q.F. Ding, K.M. Wu, X.L. He: Mater. Charact. 59 (2008) 134. DOI:10.1016/j.matchar.2006.11.02810.1016/j.matchar.2006.11.028Search in Google Scholar
[18] X.B. Li, Y. Min, C.J. Liu, M.F. Jiang: Mater Sci Tech-Lond. 32 (2016) 507. DOI:10.1179/1743284715Y.000000014410.1179/1743284715Y.0000000144Search in Google Scholar
[19] L. Yu, H.H. Wang, X.L. Wan, G. Huang, T.P. Hou, K.M. Wu: Mater Sci Tech-Lond. 30 (2014) 1951. DOI:10.1179/1743284714Y.000000060210.1179/1743284714Y.0000000602Search in Google Scholar
[20] Y. You, C.J. Shang, S. Subramanian: Met. Mater. Int. 20 (2014) 659. DOI:10.1007/s12540-014-4011-410.1007/s12540-014-4011-4Search in Google Scholar
[21] G. Huang, X.L Wan, K.M. Wu: Steel Res Int. 87 (2016) 1426. DOI:10.1002/srin.20150042410.1002/srin.201500424Search in Google Scholar
[22] H.J. Hu, G. Xu, L. Wang, Z.L. Xue, Y.L. Zhang, G.H. Liu: Mater. Design. 84 (2015) 95. DOI:10.1016/j.matdes.2015.06.13310.1016/j.matdes.2015.06.133Search in Google Scholar
[23] J. Hu, L.X. Du, H. Xie, F.T. Dong, R.D.K. Misra: Mater. Design. 60 (2014) 302. DOI:10.1016/j.matdes.2014.04.00310.1016/j.matdes.2014.04.003Search in Google Scholar
[24] W.B. Lee, S.G. Hong, C.G. Park, K.H. Kim, S.H. Park: Scripta Mater. 43 (2000) 319. DOI:10.1016/s1359-6462(00)00411-510.1016/s1359-6462(00)00411-5Search in Google Scholar
[25] C.M. Enloe, K.O. Findley, J.G. Speer: Metall. Mater. Trans. A, 46A (2015) 5308. DOI:10.1007/s11661-015-3103-110.1007/s11661-015-3103-1Search in Google Scholar
[26] G.E. Dere, H. Sharma, R.H. Petrov, J. Sietsma: Scripta. Mater. 68 (2013) 651. DOI:10.1016/j.scriptamat.2012.12.03010.1016/j.scriptamat.2012.12.030Search in Google Scholar
[27] J. Kong, L. Zhen, B. Guo, P. Li, A. Wang, C. Xie: Mater. Design. 25 (2004) 723. DOI:10.1016/j.matdes.2004.03.00910.1016/j.matdes.2004.03.009Search in Google Scholar
[28] S. Dhara, R.K.W. Marceau, K. Wood, T. Dorin, I.B. Timokhina, P.D. Hodgson: Mat. Sci. Eng. A, 718 (2018) 74. DOI:10.1016/j.msea.2018.01.07010.1016/j.msea.2018.01.070Search in Google Scholar
[29] M. PA, M. Ferry, T. Chandra: ISIJ Int. 38 (1998) 913. DOI:10.2355/isijinternational.38.91310.2355/isijinternational.38.913Search in Google Scholar
[30] Z.H. Xiong, S.L. Liu, X.M. Wang, C.J. Shang, X.C. Li, R.D.K. Misra: Mat. Sci. Eng. A, 636 (2015) 117. DOI:10.1016/j.msea.2015.03.09010.1016/j.msea.2015.03.090Search in Google Scholar
[31] Y. Hou, W. Zheng, Z. Wu, G.Q. Li, N. Moelans, M.X. Guo, B.S. Khan: Acta Mater. 118 (2016) 8. DOI:10.1016/j.actamat.2016.07.02710.1016/j.actamat.2016.07.027Search in Google Scholar
[32] R Laitinen: ACTA Universitatis Ouluensis, OULU 2006 C 234.Search in Google Scholar
[33] H.K.D.H. Bhadeshia: Bainite In Steels, 3rd ed, Maney Publishing, UK (2015).Search in Google Scholar
[34] J.L. Lee, Y.T. Pan: Mater. Sci. Eng. A, 136 (1991) 109. 1016/0921 –5093(91)90446-t. DOI:1010:1016/0921–5093(91)90446-tSearch in Google Scholar
[35] X.L. Wan, K.M. Wu, L. Cheng, R. Wei: ISIJ Int. 55(3) (2015) 679. DOI:10.2355/isijinternational.55.67910.2355/isijinternational.55.679Search in Google Scholar
[36] G. Thewlis: Mater. Sci. Tech-Lond. 10(2) (1994) 110. DOI:10.1179/mst.1994.10.2.11010.1179/mst.1994.10.2.110Search in Google Scholar
[37] A. Lambert-Perlade, A.F. Gourgues, J. Besson, A. Pineau: Metall. Mater. Trans. A, 35 (2004) 1039. DOI:10.1007/s11661-004-0030-y10.1007/s11661-004-0030-ySearch in Google Scholar
[38] A. Lambert, X. Garat, T. Sturel, A.F. Gourgues, A. Gingell: Scripta Mater. 43 (2000) 161. DOI:10.1016/s1359-6462(00)00386-910.1016/s1359-6462(00)00386-9Search in Google Scholar
[39] Z.Q. Wang, X.L. Wang, Y.R. Nan, C.J. Shang, X.M. Wang, K. Liu, B. Chen: Mater. Charact., 138 (2018) 67. DOI:10.1016/j.matchar.2018.01.03910.1016/j.matchar.2018.01.039Search in Google Scholar
[40] N. Takayama, G. Miyamoto, T. Furuhara: Acta Mater. 145 (2018) 154. DOI:10.1016/j.actamat.2017.11.03610.1016/j.actamat.2017.11.036Search in Google Scholar
[41] X.L. Wang, Z.Q. Wang, Z.J. Xie, J.L. Wang, X.C. Li, C.J. Shang: Mater. Lett., 257 (2019) 126727. DOI:10.1016/j.matlet.2019.12672710.1016/j.matlet.2019.126727Search in Google Scholar
[42] Y. Xia, G. Miyamoto, Z.G. Yang, C. Zhang, T. Furuhara: Acta Mater. 91 (2015) 10. DOI:10.1016/j.actamat.2015.03.02110.1016/j.actamat.2015.03.021Search in Google Scholar
© 2021 Walter de Gruyter GmbH, Berlin/Boston, Germany
