Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter June 1, 2005

The effects of initial spacing on wood density, fibre and pulp properties in jack pine (Pinus banksiana Lamb.)

  • Kyu-Young Kang , Shu Y. Zhang and Shawn D. Mansfield
From the journal Holzforschung

Abstract

Relationships between basic tree and wood properties, and species, seed source, geographic location, site conditions and management decisions are very complex. The objective of this study was to quantify the effects of forest management practices on wood density, fibre and pulp properties in jack pine, one of the most important commercial species in Northern America. A better understanding of the relationship between initial spacing and wood and end-product quality should help define improved forest management strategies required to produce quality wood and products in the future. On the basis of the oldest jack pine initial spacing trial established in 1941 by the USDA Forest Service, this study examined the impact of four different initial spacing trials on tree growth, wood density, fibre and pulp properties of jack pine.

The results clearly show that initial stand spacing has a significant effect on all of these properties, and thus it is possible to improve yield and wood and pulp fibre properties of jack pine through stand density regulation. Additionally, a positive effect of pre-commercial thinning on fibre properties was also demonstrated. As a consequence of these results, basic prescription information for decision-making in the establishment of jack pine plantations with desirable pulp properties can be elucidated.

:

Corresponding author. Canada Research Chair in Wood and Fibre Quality, Department of Wood Science, University of British Columbia, 2424 Main Mall, Vancouver, BC, V6T 1Z4, Canada. Fax: +1-604-822-9104, E-mail:

References

Armson, K.A. (1978) Management of jack pine species. In: Forest Management in Canada. Vol. II. Case studies. Eds. Reed, F.L.C., et al. For. Manag. Inst., Inf. Rep. FMR-X-103. pp. 1–20.Search in Google Scholar

Baker, G. (1967) Estimating specific gravity of plantation-grown red pine. For. Prod. J.17:21–24.Search in Google Scholar

Ballard, L.A., Long, J.N. (1988) Influence of stand density on log quality of lodgepole pine. Can. J. For. Res.18:911–916.10.1139/x88-138Search in Google Scholar

Bendtsen, B.A. (1978) Properties of wood from improved and intensively managed stands. For. Prod. J.28:61–72.Search in Google Scholar

Briggs, D.G., Fight, R.D. (1992) Assessing the effects of silvicultural practices on product quality and value of coast Douglas-fir trees. For. Prod. J.42:40–46.Search in Google Scholar

Cayford, J.H., Chrosciewicz Z., Sims, H.P. (1967) A review of silvicultural research in jack pine. Can. Dep. For. Rural Dev., For. Br. Publ. No. 1173. p. 255.Search in Google Scholar

Cown, D.J. (1973) Effects of severe thinning and pruning treatments on the intrinsic wood properties of young radiata pine. N.Z. J. For. Sci.3:379–386.Search in Google Scholar

Godman, R.M., Cooley, J.H. (1970) Effect of initial spacing on jack pine growth and yield. Michigan Academician2:107–111.Search in Google Scholar

Haavison, V.F., Smith, C.R. Mason, C. (1990) Space to growth: Spacing and thinning in northern Ontario. Proc. Natl. Symposium, Forestry Canada and OMNR Joint Report 15, Sault Ste. Marie, Ontario. p. 206.Search in Google Scholar

Janas, P.S., Brand, D.G. (1988) Comparative growth and development of planted and natural stands of jack pine. For. Chron.64:320–328.10.5558/tfc64320-4Search in Google Scholar

Jayne, B.A. (1958) Effect of site and spacing on the specific quantity of wood of plantation grown red pine. Tappi J.41:162–166.Search in Google Scholar

Johnstone, W.D., Pollack, J.C. (1990) The influence of spacement on the growth and development of a lodgepole pine plantation. Can. J. For. Res.20:1631–1639.10.1139/x90-216Search in Google Scholar

Kärenlampi, P., Yu, Y. (1997) Fiber properties and paper fracture – Fiber length and fiber strength. In: Fundamentals of Papermaking Materials. Ed. Baker, C.F. Transactions of the 11th fundamental research symposium held at Cambridge. Pira International. pp. 521–545.Search in Google Scholar

Koga, S., Zhang, S.Y., Bégin, J. (2002) Impact of precommercial thinning on annual growth and wood density in balsam fir. Wood Fiber Sci.34:625–642.Search in Google Scholar

Maeglin, R.R. (1967) Effect of tree spacing on weight yields for red pine and jack pine. J. For.65:647–650.Search in Google Scholar

Mansfield, S.D., Kibblewhite, R.P. (2000) Reinforcing potential of different eucalypt: Softwood blends during separate and corefining. Appita J.53:385–392.Search in Google Scholar

Paavilainen, L. (1988) Importance of coarseness and fiber length in papermaking. In: International Process and Product Quality Conference, 23–26 Oct. 1988, Savannah, GA. TAPPI, New York. pp. 99–109.Search in Google Scholar

Pichette, A., Garneau, F.-X., Jean, F.-I., Riedl, B., Girard, M. (1998) Chemical differences between the wood extracts of jack pine (Pinus banksiana), black spruce (Pices mariana) and balsam fir (Abies balsamea) from Eastern Canada. J. Wood Chem. Technol.18:427–438.10.1080/02773819809349590Search in Google Scholar

Ralston, R.A. (1953) Some effects of spacing on jack pine development in Lower Michigan after twenty-five years. Mich. Acad. Sci. Arts Let.38:137–143.Search in Google Scholar

Rudolf, P.O. (1951) Stand density and the development of young jack pine. J. For.49:254–255.Search in Google Scholar

Saville, P.S., Evans, J. (1986) Plantation silviculture in temperature regions. Clarendon Press, Oxford. p. 246.Search in Google Scholar

Seth, R. (1990a) Fibre quality factors in papermaking. I. The importance of fibre length and strength. In: Material Interactions Relevant to Pulp, Paper, and Wood Industries. Eds. Caulfield, D.F., Passaretti, J.D., Sobczynski, S.F. Material Research Society, Pittsburgh, PA. pp. 125–141.10.1557/PROC-197-125Search in Google Scholar

Seth, R. (1990b) Fibre quality factors in papermaking-II. The importance of fibre coarseness. In: Material Interactions Relevant to Pulp, Paper, and Wood Industries. Eds. Caulfield, D.F., Passaretti, J.D., Sobczynski, S.F. Material Research Society, Pittsburgh, PA. pp. 143–161.10.1557/PROC-197-143Search in Google Scholar

Seth, R.S. (1995) The effect of fiber length and coarseness on the tensile strength of wet webs: A statistical geometry explanation. Tappi J.78:99–102.Search in Google Scholar

Sjolte-Jorgensen, J. (1967) The influence of spacing on the growth and development of coniferous plantations. Int. Rev. For. Res.2:43–94.10.1016/B978-1-4831-9976-4.50008-XSearch in Google Scholar

Sjöström, E. (1993) Wood Chemistry: Fundamentals and Applications. 2nd ed. Academic Press, San Diego. p. 293.Search in Google Scholar

Teeter, L.D., Caulfield, J.P. (1991) Stand density management strategies under risk: Effects of stochastic prices. Can. J. For. Res.21:1373–1379.10.1139/x91-194Search in Google Scholar

Vezina, P.E. (1964) An analysis of measures of density in even-aged balsam fir and jack pine stands. For. Chron.40:474–481.10.5558/tfc40474-4Search in Google Scholar

Yang, K.C., Benson, C.A., Wong, J.K. (1986) Distribution of juvenile wood in two stems of Larix laricina. Can. J. For. Res.16:1041–1049.10.1139/x86-181Search in Google Scholar

Zhang, S.Y., Corneau, Y., Chauret, G. (1998) Impact of precommercial thinning on tree and wood characteristics, product quality and value in balsam fir. Can. For. Serv., No. 39, Forintek Canada Corp., Sainte-Foy, QC. pp. 74.Search in Google Scholar

Published Online: 2005-06-01
Published in Print: 2004-08-01

© Walter de Gruyter

Downloaded on 29.3.2024 from https://www.degruyter.com/document/doi/10.1515/HF.2004.069/html
Scroll to top button