Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter June 1, 2005

Inverse analysis of the transient bound water diffusion in wood

  • Wiesław Olek , Patrick Perré and Jerzy Weres
From the journal Holzforschung

Abstract

The methods so far applied to determine the bound water diffusion coefficient in wood do not provide credible results on this coefficient as well as on the boundary condition. An alternative approach based on the concept of solving the inverse transfer problems was recently applied. Two European species were investigated in the present study. A series of sorption experiments was performed and followed by the numerical identification of the coefficients. Several case studies were carried out for the constant and bound water content dependent diffusion coefficients. The obtained results were validated by comparison to a set of experimental data.

:

Corresponding author. Department of Mechanical Engineering and Thermal Techniques, Agricultural University of Poznań, ul. Wojska Polskiego 38/42, 60-627 Poznań, Poland

References

Agoua, E., Zohoun, S., Perré, P. (2001) Utilisation d'une double enceinte pour déterminer le coefficient de diffusion d'eau liée dans le bois en régime transitoire: recours à la simulation numérique pour valider la méthode d'identification. Int. J. Heat Mass Tran.44:3731–3744.10.1016/S0017-9310(01)00022-9Search in Google Scholar

Babiak, M. (1998) Diffusion coefficients of beech and black locust wood. In: Proceedings of the 3rd IUFRO Symposium “Wood Structure and Properties '98”. Zvolen, Slovakia. pp. 65–70.Search in Google Scholar

Choong, E.T., Fogg, P.J. (1968) Moisture movement in six wood species. For. Prod. J.18:66–70.Search in Google Scholar

Choong, E.T., Skaar, C. (1969) Separating internal and external resistance to moisture removal in wood drying. Wood Sci.1:200–202.Search in Google Scholar

Choong, E.T., Skaar, C. (1972) Diffusivity and surface emissivity in wood drying. Wood Fiber4:80–86.Search in Google Scholar

Hrčka, R., Babiak, M. (1999) Charakteristiky difúzie vody v dreve agáta bieleho zist'ované optimálnymi metodami. In: Zborník prednášok. Vedecký seminár “Drevo, štruktúra a vlastnosti”. Zvolen, Slovakia. pp. 47–52.Search in Google Scholar

Keey, R.B., Langrish, T.A.G., Walker, J.C. Kiln-Drying of Lumber. Springer, Berlin, 2000. pp. 85–115.10.1007/978-3-642-59653-7_5Search in Google Scholar

Koc, P., Houška, M. (2002) Characterization of the sorptive properties of spruce wood by the Inverse Identification Method. Holz Roh- Werkst.60:265–270.10.1007/s00107-002-0311-3Search in Google Scholar

Koc, P., Houška, M., Štok, B. (2003) Computer aided identification of the moisture transport parameters in spruce wood. Holzforschung57:533–538.10.1515/HF.2003.079Search in Google Scholar

Liu, J.Y., Simpson, W.T., Verill, S.P. (2001) An inverse moisture diffusion algorithm for the determination of diffusion coefficient. Drying Technol.19:1555–1568.10.1081/DRT-100107259Search in Google Scholar

Olek, W. (2003) Analysis of the cup method application for determination of the bound water diffusion coefficient in wood. Folia Forestalia Polonica, Seria B Drzewnictwo34:15–25.Search in Google Scholar

Olek, W., Weres, J. (2001) The inverse method for diffusion coefficient identification during water sorption in wood. In: Proceedings of the 3rd COST E15 Workshop on “Softwood drying to specific end-uses”. Helsinki, Finland, Paper No 27.Search in Google Scholar

Olek, W., Weres, J., Guzenda, R. (2003) Effects of thermal conductivity data on accuracy of modeling heat transfer in wood. Holzforschung57:317–325.10.1515/HF.2003.047Search in Google Scholar

Perré, P., Degiovanni, A. (1990) Simulation par volumes finis des transferts couplés en milieux poreux anisotropes: séchage du bois à basse et à haute température. Int. J. Heat Mass Tran.33:2463–2478.10.1016/0017-9310(90)90004-ESearch in Google Scholar

Perré, P., Turner, I.W. (1999) A 3-D version of TransPore: a comprehensive heat and mass transfer computational model for simulating the drying of porous media. Int. J. Heat Mass Tran.42:4501–4521.10.1016/S0017-9310(99)00098-8Search in Google Scholar

Siau, J.F. Transport Processes in Wood. Springer, Berlin, 1984. pp. 149–174.10.1007/978-3-642-69213-0Search in Google Scholar

Siau, J.F. Wood: Influence of Moisture on Physical Properties. Virginia Tech, Blacksburg, 1995. pp. 111–126.Search in Google Scholar

Siau, J.F., Avramidis, S. (1996) The surface emission coefficient of wood. Wood Fiber Sci.28:178–185.Search in Google Scholar

Söderström, O., Salin, J.G. (1993) On determination of surface emission factors in wood drying. Holzforschung47:391–397.10.1515/hfsg.1993.47.5.391Search in Google Scholar

Stamm, A.J. (1960) Bound water diffusion into wood in across the fiber direction. For. Prod. J.10:524–528.Search in Google Scholar

Wadsö, L. (1993) Studies of water vapor transport and sorption in wood. Doctoral Dissertation, Report TVBM-1013, Lund University, Lund. pp. 73–83.Search in Google Scholar

Wadsö, L. (1994) Unsteady-state water vapor adsorption in wood: an experimental study. Wood Fiber Sci.26:36–50.Search in Google Scholar

Weres, J., Olek, W., Guzenda, R. (2000) Identification of mathematical model coefficients in the analysis of the heat and mass transport in wood. Drying Technol.18:1697–1708.10.1080/07373930008917807Search in Google Scholar

Published Online: 2005-06-01
Published in Print: 2005-01-01

©2004 by Walter de Gruyter Berlin New York

Downloaded on 16.4.2024 from https://www.degruyter.com/document/doi/10.1515/HF.2005.007/html
Scroll to top button