Moisture-induced stresses and distortions in spruce cross-laminates and composite laminates

Abstract

The crosswise gluing of cross-laminated panels made of solid wood can cause problems when exposed to moisture variations. In the present study, the substitution of the spruce middle layer by a wood composite is tested for its influence on moisture-induced stresses and deformations in laboratory tests and numerical simulations. Furthermore, slits in the spruce middle layer were investigated. The hygroscopic warping due to a moisture gradient, stresses caused by moistening and cracks due to drying were studied. The results show larger warping in composite laminates compared to the spruce cross-laminate, which is governed by the modulus of elasticity of the middle layer. The in-plane swelling was found to be larger in composite laminates, while stresses were lower. The drying test discovered that cracks develop in the middle layer of spruce-medium density fiberboard laminates due to shear stresses and tensile stresses in the thickness direction. It was concluded that slits can be applied in the middle layer, as they have no significant influence on moisture-induced stresses but increase the thermal insulation. If the substitution of the spruce layer is required, the application of oriented strand board in the middle layer is recommended.