Abstract
For the mechanical properties of paper, tensile testing has been widely used. Among the tensile properties, the tensile stiffness has been used to determine the softness of low-density paper. The lower tensile stiffness, the greater softness of paper. Because the elastic region may not be clearly defined in a load-elongation curve, it is suggested to use the tensile modulus which is defined as the slope between the two points in the curve. The two points which provide the best correlation with subjective softness evaluation should be selected. Low-density paper has a much lower tensile strength, but much larger elongation at the break. It undergoes a continuous structural change during mechanical testing. The degree of the structural change should depend on tensile conditions such as the sample size, the gauge length, and the rate of elongation. For low-density paper, the tensile modulus and the tensile strength should be independent of each other. The structure efficiency factor (SEF) is defined as a ratio of the tensile strength to the tensile modulus and it may be used a guideline in developing superior low-density paper products.
Funding source: Korea Evaluation Institute of Industrial Technology
Award Identifier / Grant number: 10065715
Funding statement: We acknowledge the financial support from the Korea Evaluation Institute of Industrial Technology, Ministry of Trade, Industry and Energy, Republic of Korea (Project No. 10065715).
-
Conflict of interest: The authors declare no conflicts of interest.
References
Ampulski, R.S., Sawdai, A.H., Spendel, W., Weinstein, B. (1991) Methods for the measurement of the mechanical properties of tissue paper. In: Proceedings, Int. Paper Physics Conf., Hawaii, USA.Search in Google Scholar
Beuther, P.D., Beuther, P.D., Ko, Y., Pawar, P., Raynor Jr., W.J., Rekoske, M.J., Ries, T.D. (2012) Molded wet-pressed tissue. Patent number: US8,257,552.Search in Google Scholar
Borodulina, S., Kubchenko, A., Nygards, M., Galland, S. (2012) Stress-strain curves of paper revisited. Nord. Pulp Pap. Res. J. 27(2):318–328.10.3183/npprj-2012-27-02-p318-328Search in Google Scholar
Carstens, J.E. (1981) Layered paper having a soft and smooth velutinous surface and method of making such paper, Patent number: US4,300,981.Search in Google Scholar
Craven, B.D. (1962) Stress relaxation and work hardening in paper. Appita J. 16(2):57–70.Search in Google Scholar
Dwiggins, J.H., Harper, F.D., Schilz, G.A., Schuh, B.J., Heath, M.S., Oriaran, T.P. (2003) Soft bulky multi-ply product and method of making the same. Patent number: US6,558,511.Search in Google Scholar
Fellers, C., Carlsson, L.A. Bending stiffness, with special reference to paperboard in Handbook of physical and mechanical testing of paper and paperboard. Marcel Dekker, Inc. New York, 1983.Search in Google Scholar
Hermans, M.A., Perkins, J.M., Ko, Young, Arvinder, P.S., Boudrie, L.L., Baggot, J.L., Smith, M.J. (2009) Multiple ply tissue products having enhanced interplay liquid capacity, Patent number: US7,524,399.Search in Google Scholar
Hollmark, H. Mechanical Properties of Paper and Paperboard. Marcel Dekker, Inc. 1983. pp. 497–524.Search in Google Scholar
ISO 1924-3 (2005) Paper and board – determination of tensile properties – Part 23: Constant rate of elongation method (100 mm/min).Search in Google Scholar
ISO 1924-2 (2008) Paper and board – determination of tensile properties – Part 2: Constant rate of elongation method (20 mm/min).Search in Google Scholar
Ivarsson, B. (1948) Paper as a visco-elastic body, IV. mechanical conditioning of paper and interpretation of stress-strain curves. Sven. Papp.tidn. 51(17):382–388.Search in Google Scholar
Kawabata, S. (1980) The standardization and Analysis of Hand Evaluation 2nd ed. Textile Institute. 97.Search in Google Scholar
Ko, Y., Park, J., Lee, J., Kim, H. (2017) Principles of developing a softness evaluation technology for hygiene paper. J. Korea TAPPI 49(4):184–193.10.7584/JKTAPPI.2017.08.49.4.184Search in Google Scholar
Ko, Y., Park, J., Melani, L., Park, N., Kim, H. (2019) Principles of developing physical test methods for disposable consumer products. Nord. Pulp Pap. Res. J. 34(1):75–87.10.1515/npprj-2018-0029Search in Google Scholar
Kolseth, P., Ruvo, A. The Measurement of Viscoelastic Behavior for the Characterization of Time-, Temperature- and Humidity-dependent properties in Handbook of physical and mechanical testing of paper and paperboard. Marcel Dekker, Inc. New York, 1983.Search in Google Scholar
Lakes, R.S (2010) Viscoelastic Materials, Cambridge University Press. January. 480 p.Search in Google Scholar
Lee, J., Park, J., Kim, H., Ko, Y. (2017) A new subjective softness evaluation method for hygiene paper. J. Korea TAPPI 49(4):178–183.10.7584/JKTAPPI.2017.08.49.4.178Search in Google Scholar
Lord, J.D., Morrell, R. (2006) Elastic modulus measurement. A national measurement good practice guide, 98.Search in Google Scholar
Perkins, R.W. (1986) Fiber networks: model for predicting the mechanical behavior of paper. In: Encyclopedia of material sciences and engineering. Pergamon press Inc. pp. 1712–1719.Search in Google Scholar
Ramasubramanian, M.K. Physical and mechanical properties of towel and tissue. In: Handbook of physical testing of paper. Marcel Dekker, Inc. 2002.Search in Google Scholar
Ramasubramanian, M.K. (2011) Modeling and simulation of the creping process. PaperCon 2011, Cincinnati, USA, pp. 1203–1209.Search in Google Scholar
Ramasubramanian, M.K., Ko, Y.C. (1989), Relationship Between the In-Plane Paper Properties and the Ball Burst Strength. Mech. Cellul. Polym. Mater. 99:55–68.Search in Google Scholar
Raunio, J., Ritala, R. (2012) Simulation of creping pattern in tissue paper. Nord. Pulp Pap. Res. J. 27(2):375–381.10.3183/npprj-2012-27-02-p375-381Search in Google Scholar
Rowe, S., Volkman, R.J. (1965) Thickness measurement of sanitary tissues in relation to softness. Tappi J. 48(4):54A–56A.Search in Google Scholar
Roylance, D., McElroy, P., McGarry, F. (1980) Viscoelastic properties of paper. Fiber Sci. Technol. 13(6):411–421.10.1016/0015-0568(80)90032-9Search in Google Scholar
Setterholm, V.C. (1983) Dimensional property measurements. In: Handbook of physical and mechanical testing of paper and paperboard. 2nd ed., Marcel Dekker, Inc. pp. 403–414.Search in Google Scholar
Setterholm, V.C., Gunderson, D.E. (1983) Observations on Load-Deformation Testing. In: Handbook of physical and mechanical testing of paper and paperboard. 1st ed., Marcel Dekker, Inc. pp. 115–143.Search in Google Scholar
Spendel, W.U. (1990) Soft tissue paper containing non-cationic surfactant. Patent number: US4,959,125.Search in Google Scholar
Steenberg, B. (1947a) Paper as a visco-elastic body, I. General Survey. Sven. Papp.tidn. 50(6):127–140.Search in Google Scholar
Steenberg, B. (1947b) Paper as a visco-elastic body, II. Importance of stress-relaxation in paper. Sven. Papp.tidn. 50(15):346–350.Search in Google Scholar
Welsh, H.S. (1965) Fundamental properties of high stretch papers. In: Consolidation of the paper web. Ed. Bolam, F., pp. 397–409.Search in Google Scholar
Yokura, H., Kohono, S., Iwasaki, M. (2004) Objective hand measurement of toilet paper. J. Text. Eng. 50(1):1–5.10.4188/jte.50.1Search in Google Scholar
© 2020 Walter de Gruyter GmbH, Berlin/Boston