Abstract
Results of Sneddon’s analysis for the elastic contact between a rigid, axisymmetric punch and an elastic half space are used to show that a simple relationship exists among the contact stiffness, the contact area, and the elastic modulus that is not dependent on the geometry of the punch. The generality of the relationship has important implications for the measurement of mechanical properties using load and depth sensing indentation techniques and in the measurement of small contact areas such as those encountered in atomic force microscopy.
Similar content being viewed by others
References
J. B. Pethica, R. Hutchings, and W. C. Oliver, Philos. Mag. A 48, 593 (1983).
W. C. Oliver, R. Hutchings, and J. B. Pethica, in ASTM STP 889, edited by P. J. Blau and B. R. Lawn (American Society for Testing and Materials, Philadelphia, PA, 1986), pp. 90–108.
M. F. Doerner and W. D. Nix, J. Mater. Res. 1, 601 (1986).
J. L. Loubet, J. M. Georges, O. Marchesini, and G. Meille, J. Tribology 106, 43 (1984).
S. I. Bulychev, V. P. Alekhin, M. Kh. Shorshorov, A. P. Ternovskii, and G. D. Shnyrev, Zavod. Lab. 41, 1137 (1975).
D. Newey, M. A. Wilkens, and H. M. Pollock, J. Phys. E: Sci. Instrum. 15, 119 (1982).
D. Stone, W. R. LaFontaine, P. Alexopoulos, T-W. Wu, and Che-Yu Li, J. Mater. Res. 3, 141 (1988).
M. Kh. Shorshorov, S. I. Bulychev, and V. P. Alekhin, Sov. Phys. Sokl. 26, 769 (1982).
N. Gane and J. M. Cox, Philos. Mag. 22, 881 (1970).
I. N. Sneddon, Int. J. Engng. Sci. 3, 47 (1965).
N. A. Stillwell and D. Tabor, Proc. Phys. Soc. Lond. 78, 169 (1961).
W. C. Oliver and G. M. Pharr, in preparation.
R. B. King, Int. J. Solids Structures 23, 1657 (1987).
D. Tabor, Proc. Roy. Soc. A 192, 247 (1948).
K. L. Johnson, Contact Mechanics (Cambridge University Press, Cambridge, 1985).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Pharr, G.M., Oliver, W.C. & Brotzen, F.R. On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation. Journal of Materials Research 7, 613–617 (1992). https://doi.org/10.1557/JMR.1992.0613
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1992.0613