Abstract
Wear resistance of arc ion-plated chromium nitride films has been studied. It has been found that texture and phases composing the films depend much on bias voltage and nitrogen gas pressure at the deposition. A phase diagram was constructed as a function of these two parameters, which indicated that three categories exist: CrN single, CrN and Cr2N dual, and CrN and Cr dual phased regions, respectively. Results of Falex No. 2 test showed that the wear resistance of CrN single phased films is superior to others, especially when (220) preferred orientation is developed. Since hardness and surface morphology do not differ much between these films, a high toughness of CrN single phased film is considered to make a difference by suppressing abrasion wear.
Similar content being viewed by others
References
S. Komiya S. Ono N. Umezu and T. Narusawa Thin Solid Films 45, 433 (1977).
A. Aubert R. Gillet A. Gaudier and J.P. Terrat Thin Solid Films 108, 165 (1983).
A. Kawana and H. Ichimura in High Temperature Corrosion of Advanced Materials and Protective Coating, edited by Y. Saito B. Oney and T. Maruyama (Elsevier Science Publishers, Amsterdam, 1992), p. 267.
K. Kashiwagi K. Kobayashi A. Masuyama and Y. Murayama J. Vac. Sci. Technol. A4, 210 (1986).
D. Wang and T. Oki Thin Solid Films 185, 219 (1990).
C. Bergman in Ion Plating and Implantation, edited by R. F. Hochman (American Society for Metals, Metals Park, OH, 1986), p. 115.
P. A. Steinmann and H. E. Hintermann J. Vac. Sci. Technol. A3, 2349 (1985).
H. Hollock J. Vac. Sci. Technol. A4, 2661 (1986).
N.J. Petch Prog. Met. Phys. 5, 1 (1954).
S. Yamamoto and H. Ichimura J. Mater. Res. 7, 2240 (1992).
K. Niihara Bull. Ceram. Soc. Jpn. 20, 12 (1985).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Chiba, Y., Omura, T. & Ichimura, H. Wear resistance of arc ion-plated chromium nitride coatings. Journal of Materials Research 8, 1109–1115 (1993). https://doi.org/10.1557/JMR.1993.1109
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1993.1109