Skip to main content
Log in

Continuous hydrothermal crystallization of α–Fe2O3 and Co3O4 nanoparticles

  • Published:
Journal of Materials Research Aims and scope Submit manuscript

Abstract

Iron oxide (α–Fe2O3) and cobalt oxide (Co3O4) were produced via precipitation reactions carried out in a continuous hydrothermal apparatus. The resulting particles were nanometer-sized because of the high supersaturations generated when metal nitrate solutions are combined with sodium hydroxide or with hot, compressed water. The average particle size increased with the metal nitrate feed concentration and with residence time. A logarithmic relationship was obtained between the particle size and feed concentration and between particle size and residence time in the apparatus. The production of nanoparticles with narrow size distribution was shown to require low metal nitrate feed concentrations and short residence times. In the range of temperatures studied in this work, temperature apparently had no effect on the size except when cobalt nitrate was contacted with supercritical water in the absence of sodium hydroxide. In this case, large cobalt oxide particles were obtained when the temperature was above the critical temperature of water.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • M. Jocoby, Chem. Eng. News June 12, 37 (2000).

    Article  Google Scholar 

  • N. Ichinose, Y. Ozaki, and S. Kash, Superfine Particles Technology (Springer-Verlag, New York, 1992).

    Book  Google Scholar 

  • R.E. Rosensweig, Sci. Am. 247, 136 (1982).

    Article  CAS  Google Scholar 

  • C.M. Sorensen, in Nanoscale Materials in Chemistry, edited by K.J. Klabunde (John Wiley & Sons, New York, 2001).

    Google Scholar 

  • P.K. Gupta and C.T Huang, Life Sci. 44, 175 (1989).

    Article  CAS  Google Scholar 

  • L.J. Cote, A.S. Teja, A. Wilkinson, and J. Zhang, J. Mater. Res. 17, 2410 (2002).

    Article  CAS  Google Scholar 

  • A.S. Teja and L.J. Holm, in Supercritical Fluid Technology in Materials Science and Engineering, edited by Y-P Sun (Marcel Dekker, New York, 2002).

    Google Scholar 

  • T. Adschiri, Y. Hakuta, and K. Arai, Ind. Eng. Chem. Res. 39, 4901 (2000).

    Article  CAS  Google Scholar 

  • D.W. Matson, J.C. Lineban, J.G. Darab, M.F. Buehler, M.R. Phelps, and G.G. Neuenschwander, in Advanced Catalysts and Nanostructured Materials (Academic Press, San Diego, CA, 1996).

    Google Scholar 

  • T. Adschiri, K. Kanazawa, and K. Arai, J. Am. Ceram. Soc. 75, 1019 (1992).

    Article  CAS  Google Scholar 

  • Y. Hakuta, T. Adschiri, T. Suzuki, K. Seino, and K. Arai, J. Am. Ceram. Soc. 81, 2461 (1998).

    Article  CAS  Google Scholar 

  • Y. Hakuta, T. Adschiri, H. Hirakoso, and K. Arai, Fluid Phase Equilib. 158–160, 733 (1999).

    Article  Google Scholar 

  • M.A. Blesa and E. Matijevic, Adv. Colloid Interface Sci. 29, 173 (1989).

    Article  CAS  Google Scholar 

  • O. Söhnel and J. Garside, Precipitation—Basic Principles and Industrial Applications (Butterworth-Heinemann Ltd., Boston, MA, 1992).

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Hao, Y., Teja, A.S. Continuous hydrothermal crystallization of α–Fe2O3 and Co3O4 nanoparticles. Journal of Materials Research 18, 415–422 (2003). https://doi.org/10.1557/JMR.2003.0053

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1557/JMR.2003.0053

Navigation