Abstract
In order to successfully build three-dimensional shapes by hot-melt inkjet deposition it is essential to control the building block characteristics, i.e., the deposit geometry, dimensions and fine feature resolution. The deposit formation is mainly dependent on the material systems and their jetting behaviour. It is therefore crucial to understand how the jet formation is affected by the inks’ rheological properties and how to manipulate the jet-head driving parameters to achieve optimum deposition conditions. This paper reports our investigations with a model jet firing station, about the influence of driving parameters of hot-melt drop-on-demand print-heads (e.g., pulse shape and frequency) on the jet and deposit formation characteristics, for both unfilled and powder loaded vehicles.
Similar content being viewed by others
References
E. Sachs, M. Cima, P. Williams, D. Brancazio, J. Comie, ASME J. Eng. Ind. 114, p. 481–488 (1992).
P. F. Blazdell, J. R. G. Evans, M. J. Edirisinghe, P. Shaw and M. J. Binstead, J. Mat. Sci. Lett. 14, p. 1562–1565 (1995).
S. Kim and D. E. Mckean, J. Mat. Sci. Lett. 17, p. 141-44 (1998).
J. Windle and B. Derby, J. Mat. Sci. Lett. in press.
J. Yoo, M. Cima, E. Sachs and S. Suresh, Ceram. Eng. Sci. Proc., 16 [5] p. 755–762 (1995).
J. Yoo, K. Cho, W. Bae, M. Cima, and S. Suresh, J. Am. Ceram. Soc. 81 [1], p. 21–32 (1998).
S. Baskaran, G. D. Maupin, and G. L. Graff, Am. Ceram. Soc. Bull. 77 [7], p. 53–58 (1998).
F. Gao and A. Sonin, Proc. R. Soc. Lond. A 444, p. 533–554 (1994).
M. Orme, C. Huang, and J. Courter in Melt Spinning, Strip Casting and Slab Casting, edited by E. F. Matthys and W. G. Truckner (Proceedings of the 1996 125th TMS Annual Meeting, Anaheim, CA, USA, 1996) p. 125–143.
J. E. Fromm, IBM J. Res. Develop. 28 [3], p. 322–333 (1984).
R. L. Adams and J. Roy, ASME J. Appl. Mech. 53 [1], p. 193–197 (1986).
R. Badie and D. F. de Lange, Proc. R. Soc. Lond. A, 453, p. 2573–2581 (1997).
Lord, Rayleigh, Phil. Mag. S5, 34 [207], p. 145–154 (1892).
T. W. Shield, D. B. Bogy, and F. E. Talke, IBM J. Res. Develop. 31 [1], p. 96–110 (1987).
K. A. M. Seerden, N. Reis, B. Derby, J. W. Halloran, and J. R. G. Evans, to be published in the SFF Symposium Proceedings, MRS Fall Meeting, Boston, MA, USA, 1998.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Reis, N., Seerden, K.A.M., Derby, B. et al. Direct Inkjet Deposition of Ceramic Green Bodies: II - Jet Behaviour and Deposit Formation. MRS Online Proceedings Library 542, 147–152 (1998). https://doi.org/10.1557/PROC-542-147
Published:
Issue Date:
DOI: https://doi.org/10.1557/PROC-542-147