Abstract
The production of functional tool steel components by selective laser sintering requires an understanding of the effects of the laser processing parameters on the microstructure evolution during the fabrication process. This would allow the production of tools that have predictable and reproducible microstructure, good mechanical properties and low residual stresses. In this paper, finite element modelling has been carried out to investigate the temperature distribution and residual stresses during laser sintering of hot-work tool steel powders. The effects of the laser power and scanning rate on the selective laser sintering process have been investigated. Thermal residual stresses accumulated during the process have been predicted and compared with strain measurements made using neutron diffraction.
Similar content being viewed by others
References
M. Kandis and T. L. Bergman, J. Manufact. Sci. Eng. 122, 439, (2000).
T. H. C. Childs, C. Hauser, C. M. Taylor and A. E. Tontowi in Proceeding of the 11th Annual SFF Symposium, edited by D. L. Bourell, J. J. Beaman, R. H. Crawford, H. L. Marcus and J. W. Barlow, (The University of Texas, 2000) p100.
K. Dai and L. Shaw, Acta Mater. 49, 4171 (2001).
M. Daymond, ISIS, Rutherford Appleton Laboratory, Chilton, Oxon, OX11 0QX, UK.
R. A. Owen, R. V. Preston, P. J. Withers, H. R. Shercliff and P. J. Webster, Mat. Sci. & Tech., In print (2002).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ibraheem, A.K., Derby, B. & Withers, P.J. Thermal and Residual Stress Modelling of the Selective Laser Sintering Process. MRS Online Proceedings Library 758, 18 (2002). https://doi.org/10.1557/PROC-758-LL1.8
Published:
DOI: https://doi.org/10.1557/PROC-758-LL1.8