Abstract
Macroporous titania (TiO2) films were prepared by a sol-gel dip coating method from a system containing poly(ethylene glycol) (PEG) and poly(vinylpyrrolidone) (PVP). The thickness of the macroporous films increased with an increase in PVP concentration, but the excess incorporation of PVP suppressed the macroscopic phase separation and enhanced the formation of macroscopic cracks. The porosity and the domain size were simply determined by PEG concentration. Although both PEG and PVP are hydrogen-bonding polymers having proton-accepting ability, preparation of macroporous TiO2 films was unsuccessful in systems containing only PVP as a polymer. Macroporous TiO2 films having interconnected pore structure as thick as 1 mm were successfully prepared by repeating the deposition several times.
Similar content being viewed by others
References
C.J. Brinker and G.W. Scherer, Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing (Academic Press, New York, 1990).
K. Nakanishi and N. Soga, J. Am. Ceram. Soc. 74, 2518 (1991).
K. Nakanishi, H. Komura, R. Takahashi, and N. Soga, Bull. Chem. Soc. Jpn. 67, 1327 (1994).
K. Nakanishi and N. Soga, J. Non-Cryst. Solids 139, 1 (1992).
K. Nakanishi, J. Porous Mater. 4, 67 (1997).
K. Kato, A. Tsuzuki, Y. Torii, H. Taoda, T. Kato, and Y. Butsugan, J. Mater. Sci. 30, 837 (1995).
K. Kajihara, K. Nakanishi, K. Tanaka, K. Hirao, and N. Soga, J. Am. Ceram. Soc. 81, 2670 (1998).
K. Kajihara and T. Yao, J. Sol-Gel Sci. Technol. 12, 185 (1998).
K. Kajihara and T. Yao, J. Sol-Gel Sci. Technol. 12, 193 (1998).
K. Kajihara and T. Yao, J. Sol-Gel Sci. Technol. 16, 257 (1999).
K. Kajihara and T. Yao, J. Sol-Gel Sci. Technol. 17, 173 (2000).
B. O’Regan and M. Grätzel, Nature 353, 737 (1991).
A. Fujishima and K. Honda, Nature 238, 37 (1972).
L.D. Birkefeld, A.M. Azad, and S.A. Akbar, J. Am. Ceram. Soc. 75, 2964 (1992).
H. Kozuka and M. Kajimura, Chem. Lett. 1999, 1029 (1999).
G. Philip and H. Schmidt, J. Non-Cryst. Solids 63, 283 (1983).
C. Sanchez and M. In, J. Non-Cryst. Solids 147&148, 1 (1992).
J.D. Mackenzie, J. Ceram. Soc. Jpn. 101, 1 (1993).
J.D. Mackenzie, J. Sol-Gel Sci. Technol. 2, 81 (1994).
M. In, C. Gérardin, J. Lambard, and C. Sanchez, J. Sol-Gel Sci. Technol. 5, 101 (1995).
C. Barglik-Chory and U. Schubert, J. Sol-Gel Sci. Technol. 5, 135 (1995).
J. Rubio and J.A. Kitchener, J. Colloid Interface Sci. 57, 132 (1976).
G.L. Howard, C.C. Ma, and C.W. Yip, Polym. Commun. 24, 182 (1983).
B. Siffert and J.F. Li, Colloid. Surf. 40, 207 (1989).
E. Kokufuta, A. Yokota, and I. Nakamura, Polymer 24, 1031 (1983).
C. Pradip, Maltesh, P. Somasundaran, R.A. Kulkarni, and S. Gundiah, Langmuir 7, 2108 (1991).
T. Ikawa, K. Abe, K. Honda, and E. Tsuchida, J. Polym. Sci. 13, 1505 (1975).
S.K. Chatterjee, A. Malhotra, and D. Yadav, J. Polym. Sci. Polym. Chem. 22, 3697 (1984).
T. Saegusa, J. Macromol. Sci.: Chem. A 28, 817 (1991).
K. Kajihara and T. Yao, J. Sol-Gel Sci. Technol. (in press).
P.F. Belleville and H.G. Floch, J. Sol-Gel Sci. Technol. 3, 23 (1994).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kajihara, K., Nakanishi, K. Macroporous morphology of titania films prepared by sol-gel dip-coating method from a system containing poly(ethylene glycol) and poly(vinylpyrrolidone). Journal of Materials Research 16, 58–66 (2001). https://doi.org/10.1557/JMR.2001.0013
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.2001.0013