Abstract
The relationship between electric current direction and recrystallization rate as well as the resulting texture induced by electric current pulses (ECPs) was investigated in a Cu–Zn alloy. To distinguish the effect of electric current direction on recrystallization rate, the same input energy was exerted upon the samples to eliminate the effect of Joule heating induced by ECPs. Results showed that the recrystallization-related nucleation rate could be greatly enhanced when the electric current was dispositioned at an angle to the rolling direction. The main mechanism for the different nucleation rates might be ascribed to the different driving forces for recrystallization induced by ECPs when there was an angle between the electric current direction and the rolling direction.By all reckoning, it was expected that the ECP treatment would provide a promising approach for controlling the nucleation rate by changing the exerted electric current direction.
Similar content being viewed by others
Change history
01 January 2014
An Erratum to this paper has been published: https://doi.org/10.1557/jmr.2013.374
References
K. Wierzbanowski, J. Tarasiuk, B. Bacroix, and K. Sztwiertnia: Stored energy and its role in recrystallization process. J. Neutron Res. 9, 61 (2001).
P. Peczak and M. Luton: The effect of nucleation models on dynamic recrystallization I. Homogeneous stored energy distribution. Phil. Mag. B. 68, 115 (1993).
A.W. Larsen, H.F. Poulsen, L. Margulies, C. Gundlach, Q.F. Xing, X.X. Huang, and D.J. Jensen: Nucleation of recrystallization observed in situ in the bulk of a deformed metal. Scr. Mater. 53, 553 (2005).
F. Humphreys and M. Matherly: Recrystallization and Related Annealing Phenomena (Elsevier Science Ltd. Publications, New York, 1995), pp. 250, 259.
R. Doherty, D. Hughes, F. Humphreys, J. Jonas, D. Jensen, M. Kassner, W. King, T. McNelley, H. McQueen, and A. Rollett: Current issues in recrystallization: A review. Mater. Sci. Eng., A 238, 219 (1997).
H. Conrad, N. Karam, and S. Mannan: Effect of electric current pulses on the recrystallization of copper. Scr. Metall. 17, 411 (1983).
H. Conrad, N. Karam, and S. Mannan: Effect of prior cold work on the influence of electric current pulses on the recrystallization of copper. Scr. Metall. 18, 275 (1984).
R.S. Qin, S.H. Xiao, J.D. Guo, G.H. He, and B.L. Zhou: A healing model for metallic materials: Theoretical study. Biomimetics 4, 121 (1996).
Y.Z. Zhou, S.H. Xiao, and J.D. Guo: Recrystallized microstructure in cold worked brass produced by electropulsing treatment. Mater. Lett. 58, 1948 (2004).
S.H. Xiao, J.D. Guo, and S.X. Li: The effect of electropulsing on dislocation structures in [233] coplanar double-slip-oriented fatigued copper single crystals. Philos. Mag. Lett. 82, 617 (2002).
G.L. Hu, Y.H. Zhu, C.H. Shek, and G.Y. Tang: Electropulsing induced G-texture evolution in a deformed Fe-3%Si alloy strip. J. Mater. Res. 26, 917 (2011).
G.L. Hu, C.H. Shek, Y.H. Zhu, and G.Y. Tang: Electropulsing induced texture evolution in the primary recrystallization of Fe-3%Si alloy strip. Metall. Mater. Trans. A 42, 3484 (2011).
W.B. Dai, X.L. Wang, H.M. Zhao, and X. Zhao: Effect of electric current on grain orientation in a cold rolled Fe-3%Si steel. Mater. Trans. 53, 229 (2012).
X.L. Wang, J.D. Guo, Y.M. Wang, X.Y. Wu, and B.Q. Wang: Segregation of lead in Cu–Zn alloy under electric current pulses. Appl. Phys. Lett. 89, 61910 (2006).
X.L. Wang, Y.B. Wang, Y.M. Wang, B.Q. Wang, and J.D. Guo: Oriented nanotwins induced by electric current pulses in a Cu-Zn alloy. Appl. Phys. Lett. 91, 163112 (2007).
H. Conrad and A.F. Sprecher: Dislocations in Solids, edited by F.R.N. Nabarro (Elservier, Amsterdam, 1989), p. 499.
A. Morawiec: On the frequency of occurrence of tilt and twist grain boundaries. Scr. Mater. 61, 438 (2009).
W.R. Hibbard Jr. and C.G. Dunn: A study of <112> edge dislocations in bent silicon-iron single crystals. Acta Metall. 4, 306 (1956).
S.P. Kiselev: Dislocation structure of shear bands in single crystals. J. Appl. Mech. Tech. Phys. 47, 857 (2006).
K. Okazaki, M. Kagawa, and H. Conrad: A study of the electroplastic effect in metals. Scr. Metall. 12, 1063 (1978).
A.F. Sprecher, S.L. Mannan, and H. Conrad: Overview no. 49: On the mechanisms for the electroplastic effect in metals. Acta Metall. 34, 1145 (1986).
D.W. Tang, B.L. Zhou, H. Cao, and G.H. He: Thermal stress relaxation behavior in thin films under transient laser-pulse heating. J. Appl. Phys. 73, 3749 (1993).
B.L. Zhou, G.H. He, Y.J. Gao, W.L. Zhao, and J.D. Guo: The microscopic nonequilibrium process in solids under transient heating. Inter. J. Therm. 18, 481 (1997).
M. Meyers and K. Chawla: Mechanical Behavior of Materials, 2nd ed. (Cambridge University Press, London, 2009), pp. 109, 249.
ACKNOWLEDGMENTS
This work was supported by the National Nature Science Foundation of China, Grant No. 50901018. The authors thank Professor J.D. Guo of Institute of Metal Research, Chinese Academy of Sciences, for many helpful discussions.
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Wang, X., Dai, W., Ma, C. et al. Effect of electric current direction on recrystallization rate and texture of a Cu–Zn alloy. Journal of Materials Research 28, 1378–1385 (2013). https://doi.org/10.1557/jmr.2013.86
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/jmr.2013.86