Abstract
Nanoindentation was performed to study the interfacial delamination of SiN/GaAs film/substrate structures, and to determine the adhesion properties of the interface. A sequential dual-indentation approach was developed and the tests were carefully designed to induce interfacial delamination, but avoid the occurrence of the film’s through-thickness fracture or buckling. A clamped circular plate model was used to approximate the elastic deflection of the detached film and hence the delamination area. The Griffith energy balance was then used to compute the energy release associated with the delamination. The energy release rate, Gin, calculated was found to be independent on the testing conditions, which agrees with the fundamental assumption of the Griffith energy concept.
Similar content being viewed by others
REFERENCES
F.W. Smith, H.Q. Le, V. Diadiuk, M.A. Hollis, A.R. Calawa, S. Gupta, M. Frankel, D.R. Dykaar, G.A. Mourou, and T.Y. Hsiang: Picosecond GaAs-based photoconductive optoelectronic detectors. Appl. Phys. Lett. 54 (10), 890 (1989).
D.K.W. Lam and R.I. Macdonald: GaAs optoelectronic mixer operation at 4.5 GHz. IEEE Trans. Electron Devices 31 (12), 1766 (1984).
I. Hallakoun, I. Toledo, J. Kaplun, G. Bunin, M. Leibovitch, and Y. Shapira: Critical dimension improvement of plasma enhanced chemical vapor deposition silicon nitride thin films in GaAs devices. Mater. Sci. Eng., B 102 (1–3), 352 (2003).
M. Gioti, S. Logothetidis, and C. Charitidis: Stress relaxation and stability in thick amorphous carbon films deposited in layer structure. Appl. Phys. Lett. 73 (2), 184 (1998).
S.Y. Chang, H.C. Tsai, J.Y. Chang, S.J. Lin, and Y.S. Chang: Analyses of interface adhesion between porous SiOCH low-k film and SiCN layers by nanoindentation and nanoscratch tests. Thin Solid Films 516 (16), 5334 (2008).
E.Y. Chang, G.T. Cibuzar, J.M. Vanhove, R.M. Nagarajan, and K.P. Pande: GaAs device passivation using sputtered silicon-nitride. Appl. Phys. Lett. 53 (17), 1638 (1988).
K.B. Yeap, K.Y. Zeng, H.Y. Jiang, L. Shen, and D.Z. Chi: Determining interfacial properties of submicron low-k films on Si substrate by using wedge indentation technique. J. Appl. Phys. 101 (12), 123531 (2007).
R.K. Singh, M.T. Tilbrook, Z.H. Xie, A. Bendavid, P.J. Martin, P. Munroe, and M. Hoffman: Contact damage evolution in diamondlike carbon coatings on ductile substrates. J. Mater. Res. 23 (1), 27 (2008).
L.G. Rosenfeld, J.E. Ritter, T.J. Lardner, and M.R. Lin: Use of the microindentation technique for determining interfacial fracture energy. J. Appl. Phys. 67 (7), 3291 (1990).
A.J. Perry: Scratch adhesion testing of hard coatings. Thin Solid Films 107 (2), 167 (1983).
A.A. Volinsky, N.R. Moody, and W.W. Gerberich: Interfacial toughness measurements for thin films on substrates. Acta Mater. 50 (3), 441 (2002).
S. Zhang, Y.S. Wang, X.T. Zeng, K.A. Khor, W.J. Weng, and D.E. Sun: Evaluation of adhesion strength and toughness of fluoridated hydroxyapatite coatings. Thin Solid Films 516 (16), 5162 (2008).
R. Jacobsson: Measurement of the adhesion of thin films. Thin Solid Films 34 (2), 191 (1976).
R. Dauskardt, M. Lane, Q. Ma, and N. Krishna: Adhesion and debonding of multi-layer thin film structures. Eng. Fract. Mech. 61 (1), 141 (1998).
S. Zhang and X.M. Zhang: Toughness evaluation of hard coatings and thin films. Thin Solid Films 520 (7), 2375 (2012).
B.R. Lawn, A.G. Evans, and D.B. Marshall: Elastic-plastic indentation damage in ceramics-the medium-radial crack system. J. Am. Ceram. Soc. 63 (9–10), 574 (1980).
D.B. Marshall, S.S. Chiang, A.G. Evans, and B.R. Lawn: Elastic-plastic indentation in ceramics-the lateral crack system. Am. Ceram. Soc. Bull. 60 (3), 384 (1981).
J. Alvarado-Rivera, J. Muñoz-Saldaña, and R. Ramírez-Bon: Determination of fracture toughness and energy dissipation of SiO2-poly(methyl metacrylate) hybrid films by nanoindentation. Thin Solid Films 519 (16), 5528 (2011).
H.T. Xie and H. Huang: Characterization of the interfacial strength of SiNx/GaAs film/substrate systems using energy balance in nanoindentation. J. Mater. Res. 28 (22), 3137 (2013).
C. Anthony and A.C. Fischer-Cripps: Nanoindentation (Springer-Verlag, New York, 2004).
S.V. Hainsworth, M.R. McGurk, and T.F. Page: The effect of coating cracking on the indentation response of thin hard-coated systems. Surf. Coat. Technol. 102 (1–2), 97 (1998).
P.J. Wei, W.L. Liang, C.F. Ai, and J.F. Lin: A new method for determining the strain energy release rate of an interface via force-depth data of nanoindentation tests. Nanotechnology 20 (2), 025701 (2009).
P.J. Wei, S.B. Chio, W.L. Liang, and J.F. Lin: Determining buckling strain energy release rate through indentation-induced delamination. Thin Solid Films 519 (15), 4889 (2011).
J.J. Chen and S.J. Bull: Approaches to investigate delamination and interfacial toughness in coated systems: An overview. J. Phys. D: Appl. Phys. 44 (3), 034001 (2011).
J.J. Chen and S.J. Bull: Assessment of the adhesion of ceramic coatings. Adv. Sci. Technol. 45, 1299 (2006).
J. Chen and S.J. Bull: Indentation fracture and toughness assessment for thin optical coatings on glass. J. Phys. D: Appl. Phys. 40 (18), 5401 (2007).
M.Y. Lu, H.T. Xie, H. Huang, J. Zou, and Y.H. He: Nanoindentation induced delamination of PECVD silicon nitride thin film on GaAs substrate. J. Mater. Res. 28 (8), 1047 (2013).
S-J. Cho, K-R. Lee, K. Yong Eun, J. Hee Hahn, and D-H. Ko: Determination of elastic modulus and Poisson’s ratio of diamond-like carbon films. Thin Solid Films 341 (1–2), 207 (1999).
W.C. Oliver and G.M. Pharr: Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology. J. Mater. Res. 19 (1), 3 (2004).
H. Huang, K.J. Winchester, A. Suvorova, B.R. Lawn, Y. Liu, X.Z. Hu, J.M. Dell, and L. Faraone: Effect of deposition conditions on mechanical properties of low-temperature PECVD silicon nitride films. Mater. Sci. Eng., A 435, 453 (2006).
H. Huang, K. Winchester, Y. Liu, X.Z. Hu, C.A. Musca, J.M. Dell, and L. Faraone: Determination of mechanical properties of PECVD silicon nitride thin films for tunable MEMS Fabry-Perot optical filters. J. Micromech. Microeng. 15 (3), 608 (2005).
Y.G. Jung, B.R. Lawn, M. Martyniuk, H. Huang, and X.Z. Hu: Evaluation of elastic modulus and hardness of thin films by nanoindentation. J. Mater. Res. 19 (10), 3076 (2004).
J.E. Bradby, J.S. Williams, J. Wong-Leung, M.V. Swain, and P. Munroe: Mechanical deformation of InP and GaAs by spherical indentation. Appl. Phys. Lett. 78 (21), 3235 (2001).
S.J. Lloyd, J.M. Molina-Aldareguia, and W.J. Clegg: Deformation under nanoindents in Si, Ge, and GaAs examined through transmission electron microscopy. J. Mater. Res. 16 (12), 3347 (2001).
K.L. Johnson: Contact Mechanics (Cambridge University Press, Cambridge, United Kingdom, 1895).
J.J. Chen: Indentation-based methods to assess fracture toughness for thin coatings. J. Phys. D: Appl. Phys. 45 (20), (2012).
L. Ma, D.J. Morris, S.L. Jennerjohn, D.F. Bahr, and L.E. Levine: The role of probe shape on the initiation of metal plasticity in nanoindentation. Acta Mater. 60 (12), 4729 (2012).
J. Mayer, L.A. Giannuzzi, T. Kamino, and J. Michael: TEM sample preparation and FIB-induced damage. MRS Bull. 32 (5), 400 (2007).
H. Bei, S. Shim, M.K. Miller, G.M. Pharr, and E.P. George: Effects of focused ion beam milling on the nanomechanical behavior of a molybdenum-alloy single crystal. Appl. Phys. Lett. 91 (11), 111915 (2007).
P. Pobedinskas, J-C. Bolsée, W. Dexters, B. Ruttens, V. Mortet, J. D’Haen, J.V. Manca, and K. Haenen: Thickness dependent residual stress in sputtered AlN thin films. Thin Solid Films 522 (0), 180 (2012).
X.C. Zhang, C.J. Liu, F.Z. Xuan, Z.D. Wang, and S.T. Tu: Effect of residual stresses on the strength and fracture energy of the brittle film: Multiple cracking analysis. Comput. Mater. Sci. 50 (1), 246 (2010).
S. Nazarpour and A. Cirera: Variation of adhesive force at the interface of Pd and SrTiO3 as a consequence of residual stresses. J. Phys. D: Appl. Phys. 44 (3), 034002 (2011).
A.A. Volinsky, J.B. Vella, and W.W. Gerberich: Fracture toughness, adhesion and mechanical properties of low-K dielectric thin films measured by nanoindentation. Thin Solid Films 429 (1–2), 201 (2003).
A.G. Evans and J.W. Hutchinson: On the mechanics of delamination and spalling in compressed films. Int. J. Solids Struct. 20 (5), 455 (1984).
A.G. Evans and J.W. Hutchinson: The thermomechanical integrity of thin films and multilayers. Acta Metall. Mater. 43 (7), 2507 (1995).
V.K. Khanna: Adhesion-delamination phenomena at the surfaces and interfaces in microelectronics and MEMS structures and packaged devices. J. Phys. D: Appl. Phys. 44 (3), (2011).
ACKNOWLEDGMENTS
The authors would like to acknowledge the financial support of WIN Semiconductors Co. and Australian Research Council (ARC). This work was financially supported by ARC under the Future Fellow Program.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lu, M., Huang, H. Determination of the energy release rate in the interfacial delamination of silicon nitride film on gallium arsenide substrate via nanoindentation. Journal of Materials Research 29, 801–810 (2014). https://doi.org/10.1557/jmr.2014.41
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/jmr.2014.41