Skip to main content
Log in

Thermal dilation and internal relative humidity of hardened cement paste

  • Original Article
  • Published:
Materials and Structures Aims and scope Submit manuscript

Abstract

The coefficient of thermal dilation (CTD) of hardened cement paste and concrete is a function of the state of internal moisture in the pore system. It has been theorized that changes in the pore fluid pressure induced by temperature change causes additional dilation when the material is partially saturated. Drying shrinkage stresses in early-age concrete also evolve from changes in the pore fluid pressure. The Kelvin-Laplace equation relates changes in the pore fluid pressure to the measured internal relative humidity (RH). This research investigated the role of pore pressure changes on the CTD through internal RH measurements. A maximum change in humidity (ΔRH) due to temperature change (ΔT) was measured when the initial humidity was at an intermediate value. Likewise, the maximum CTD was also measured at an intermediate initial RH. Based on these findings, the additional thermal strain caused by changes in pore fluid pressure was modelled using internal RH measurements as a primary parameter.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Amberg CH, McIntosh R (1952) A study of adsorption hysteresis by means of length changes of a rod of porous glass. Can J. of Chem., 30:1012–1032.

    Article  Google Scholar 

  2. Powers TC (1947) Physical properties of hardened portland cement paste. ACI J. April:988.

  3. Powers TC (1968) Thermodynamics of volume change and creep. Mat. et. Const., 1(6):487–507.

    Article  Google Scholar 

  4. Ferraris CF, Wittmann FH (1987) Shrinkage mechanisms of hardened cement paste. Cem. and Concr. Res., 17(3):453–464.

    Article  Google Scholar 

  5. Hansen W (1987) Drying shrinkage mechanisms in portland cement paste. J. Am. Cer. Soc., 70(5):323–328.

    Article  Google Scholar 

  6. Mindess S, Young JF (1981) Concrete (Prentice-Hall, NJ).]

  7. Lura P, Guang YE, Van Bruegel K (2004) Effect of cement type on autoegenous deformation of cement-based materials. ACI SP 220–4:57–68.

    Google Scholar 

  8. Bentz DP, Garboczi EJ, Quenard DA (1998) Modelling drying shrinkage in reconstructed porous materials: Application to porous Vycor glass. Mod. and Sim. in Mat. Sci. and Eng., 6(3):211–236.

    Article  Google Scholar 

  9. Grasley ZC, Lange DA, Liu Y-S (June 2005) Volume change mechanisms in concrete: New directions for modeling, presented at Knud Hojgaard Conference. Lyngby, Denmark.

  10. Grasley ZC, Lange DA (2004) Modeling drying shrinkage stress gradients in concrete. Cem. Concr. and Agg., 26(2):115–122.

    Google Scholar 

  11. Meyers SL (1950) Thermal expansion characteristics of hardened cement paste and of concrete. Proc. of the Highway Res. Bd., 30:193.

    Google Scholar 

  12. Zoldners NG, (1972) Thermal properties of concrete under sustained elevated temperatures. ACI SP-25–1:1–27.

  13. Bjontegaard Ø(1999) Thermal dilation and autogenous deformation as driving forces to self-induced stress in high performance concrete. (The Norwegian University of Science and Technology, Trondheim).

  14. Bazant ZP (1970) Delayed thermal dilatations of cement paste and concrete due to mass transport. Nucl. Eng. and Des., 14(2):308–318.

    Article  Google Scholar 

  15. Helmuth RA (1967) Dimensional changes of hardened portland cement pastes caused by temperature changes. Proc. of the Highway Res. Bd., 40:315–336.

    Google Scholar 

  16. Ai H (2000) Investigation of the dimensional stability in DSP cement paste. (University of Illinois at U-C: Urbana, IL).

    Google Scholar 

  17. Scherer GW (2000) Thermal expansion kinetics: method to measure permeability of cementitious materials. I Theory J. Am. Cer. Soc., 83(11):2753–2761.

    Article  Google Scholar 

  18. Sellevold EJ, Bjontegaard Ø (2003) Thermal expansion coefficient (CTE) of cement paste and concrete: effect of moisture content. in Advances in Cement and Concrete,’ (Proceedings of an International Conference, Copper Mountain, CO) 27–37.

  19. Sellevold EJ, Bjontegaard Ø (2004) Coefficient of thermal expansion of cement paste and concrete: Mechanisms of moisture interaction. Mat. & Struct., accepted for publication.

  20. Radjy F, Sellevold EJ, Hansen KK (2003) Isosteric vapor pressure-temperature data for water sorption in hardened cement paste: enthalpy, entropy and sorption isotherms at different temperatures, Tech. Univ. of Denmark, http://www4.byg.dtu.dk/publications/rapporter/R-057.pdf.

  21. Grasley ZC, Lange DA, D'Ambrosia MD (2005) Drying stresses and internal relative humidity in concrete. in Materials Science of Concrete VII, (J. Skalny, American Ceramic Society).

  22. Mackenzie, JK (1950) The elastic constants of a solid containing spherical holes. Proc. Phys. Soc., B 63:2–11.

    Article  Google Scholar 

  23. Xi Y, Jennings HM (1997) Shrinkage of cement paste modelled by a multiscale effective homogenous theory. Mat. and Struct., 30:329–339.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Grasley, Z.C., Lange, D.A. Thermal dilation and internal relative humidity of hardened cement paste. Mater Struct 40, 311–317 (2007). https://doi.org/10.1617/s11527-006-9108-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1617/s11527-006-9108-x

Keywords

Navigation