Skip to main content
Log in

Comparative study on strength, sorptivity, and chloride ingress characteristics of air-cured and water-cured concretes modified with metakaolin

  • Original Article
  • Published:
Materials and Structures Aims and scope Submit manuscript

Abstract

This paper reports an investigation in which the performance of plain and metakaolin (MK)-modified concretes were studied under two different curing regimes. The purpose of this study is to evaluate the effectiveness of MK in enhancing the strength and permeation properties of concrete. MK was used to replace 0–20% of Portland cement by weight in concrete with two water-binder (w/b) ratios of 0.35 and 0.55. The change in compressive strength, sorptivity, and chloride ingress with age at all cement replacement levels under both air and water curing are compared with those of the control concrete. The results indicated that the inclusion of MK greatly reduced sorptivity and chloride permeability of concrete in varying magnitudes, depending mainly on replacement level of MK, w/b ratio, curing condition, and chloride exposure period. It was found that under the inadequate or poor curing, MK-modified concretes suffered a more severe loss of compressive strength and permeability-related durability than the plain concretes.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

  1. Aldea CM, Young F, Wang K, Shah SP (2000) Effects of curing conditions on properties of concrete using slag replacement. Cem Concr Res 30:465–472

    Article  Google Scholar 

  2. Neville AM (1996) Properties of concrete. Addison Wesley Logman, 4th and final edn, England

  3. Cook DJ (1986) Calcined clay, shale, and other soils. In: Swamy RN (ed) Cement replacement materials, Surrey University Press, pp. 40–72

  4. Dunster AM, Parsonage JR, Thomas MJK (1993) Pozzolanic reaction of metakaolinite and its effects on Portland cement hydration. J Mater Sci 28:1345–1351

    Article  Google Scholar 

  5. Kristof E, Juhasz AZ, Vassanyi I (1993) The effect of mechanical treatment on the crystal structure and thermal behavior of kaolinite. Clays Clay Miner 41:608–612

    Article  Google Scholar 

  6. Frias M, Cabrera J (2001) Influence of MK on the reaction kinetics in MK/lime and MK-blended cement systems at 20oC. Cem Concr Res 31:519–527

    Article  Google Scholar 

  7. Gamiz E, Melgosa M, Maranon MS, Garcia JMM, Delgado R (2005) Relationships between chemico–mineralogical composition and color properties in selected natural and calcined Spanish kaolins. Appl Clay Sci 28:269–282

    Article  Google Scholar 

  8. Shvarzman A, Kovler K, Grader GS, Shter GE (2003) The effect of dehyroxylation/amorphization degree on pozzolanic activity of kaolinite. Cem Concr Res 31:405–416

    Article  Google Scholar 

  9. Kakali G, Perraki T, Tsivilis S, Badogiannis E (2001) Thermal treatment of kaolin: the effect of mineralogy on the pozzolanic activity. Appl Clay Sci 20:73–80

    Article  Google Scholar 

  10. Caldarone MA, Gruber KA, Burg RG (1994) High-reactivity metakaolin: a new generation mineral admixture. Concr Int 16(11):37–40

    Google Scholar 

  11. Zhang MH, Malhotra VM (1995) Characteristics of a thermally activated alumino-silicate pozzolanic material ant its use in concrete. Cem Concr Res 25:1713–1725

    Article  Google Scholar 

  12. Wild S, Khatip JM, Jones A (1996) Relative strength, pozzolanic activity and cement hydration in superplasticized metakaolin concrete. Cem Concr Res 26:1537–1544

    Article  Google Scholar 

  13. Khatib JM, Wild S (1996) Pore size distribution of metakaolin paste. Cem Concr Res 26:1545–1553

    Article  Google Scholar 

  14. Brooks JJ, Johari MAM (2001) Effect of metakaolin on creep and shrinkage of concrete. Cem Concr Compos 23:495–502

    Article  Google Scholar 

  15. Sabir BB, Wild S, Bai J (2001) Metakaolin and calcined clays as pozzolans for concrete: a review. Cem Concr Compos 23:441–454

    Article  Google Scholar 

  16. Ding JT, Li Z (2002) Effects of metakaolin and silica fume on properties of concretes. ACI Mater J 99(4):393–398

    Google Scholar 

  17. Khatib JM, Wild S (1998) Pore size distribution of metakaolin paste. Cem Concr Res 28(1):83–92

    Article  Google Scholar 

  18. Bai J, Sabir BB, Wild S, Kinuthia J (2000) Strength development in concrete incorporating PFA and metakaolin. Mag Concr Res 52(3):153–162

    Google Scholar 

  19. Boddy A, Hooton RA, Gruber KA (2001) Long-term testing of the chloride-penetration resistance of concrete containing high-reactivity metakaolin. Cem Concr Res 31:759–765

    Article  Google Scholar 

  20. Bai J, Wild S, Sabir BB (2003) Chloride ingress and strength loss in concrete with different MK-PFA-PC binder compositions exposed to synthetic seawater. Cem Concr Res 33:353–362

    Article  Google Scholar 

  21. Gruber KA, Ramlochan T, Boddy A, Hooton RD, Thomas MDA (2001) Increasing concrete durability with high-reactivity metakaolin. Cem Concr Compos 23:479–484

    Article  Google Scholar 

  22. Lee ST, Moon HY, Hooton RD, Kim JP (2005) Effect of sodium concentration and replacement levels of metakaolin on the resistance of mortars exposed to magnesium sulfate solutions. Cem Concr Res 35:1545–1553

    Google Scholar 

  23. Batis G, Pantazopoulou P, Tsivilis S, Badogiannis E (2005) The effect of metakaolin on the corrosion behavior of cement mortars. Cem Concr Compos 27:458–467

    Google Scholar 

  24. Revilla CF, Ramirez SM, Varela MTB (2006) Modelling of slaked lime-metakaolin mortar engineering characteristics in terms of process variables. Cem Concr Compos 28:458–467

    Article  Google Scholar 

  25. Neville AM, Brooks JJ (1990) Concrete technology. Longman scientific and Technical, Singapore

    Google Scholar 

  26. Khatri RP, Sirivivatnanon V, Yu LK (1997) Effect of curing on water permeability of concretes prepared with normal Portland cement and with slag and silica fume. Mag Concr Res 49(180):162–172

    Article  Google Scholar 

  27. Güneyisi E, Özturan T, Gesoğlu M (2005) A study on reinforcement corrosion and related properties of plain and blended cement concretes under different curing conditions. Cem Concr Compos 27(4):449–461

    Article  Google Scholar 

  28. Ramezanianpour AA, Malhotra VM (1995) Effect of curing on the compressive strength, resistance to chloride ion penetration and porosity of concretes incorporating slag, fly ash, or silica fume. Cem Concr Compos 17:125–133

    Article  Google Scholar 

  29. Razak HA, Chai HK, Wong HS (2004) Near surface characteristics of concrete containing supplementary cementing materials. Cem Concr Compos 26:883–889

    Google Scholar 

  30. Wee TH, Suryavanshi AK, Tin SS (2000) Evaluation of rapid chloride permeability test (RCPT) results for concrete containing mineral admixtures. ACI Mater J 97(2):221–232

    Google Scholar 

  31. Otsuki N, Nagataki S, Nakashita K (1992) Evaluation of AgNO3 nitrate solution spray method for measurement of chloride penetration into the hardened cementitious matrix materials. ACI Mater J 89(6):587–592

    Google Scholar 

  32. Wee TH, Suryavanshi AK, Tin SS (1999) Influence of aggregate fraction in the mix on the reliability of the rapid chloride permeability test. Cem Concr Compos 21:59–72

    Article  Google Scholar 

  33. Meck E, Sirivivatnanon V (2003) Field indicator of chloride penetration depth. Cem Concr Res 33:1113–1117

    Article  Google Scholar 

  34. Toutanji HA, Bayasi Z (1999) Effect of curing procedures on properties of silica fume concrete. Cem Concr Res 29:497–501

    Article  Google Scholar 

  35. Bai J, Wild S, Sabir BB (2002) Sorptivity and strength of air-cured and water-cured PC-PFA-MK concrete and the influence of binder composition on carbonation depth. Cem Concr Res 32:1813–1821

    Article  Google Scholar 

  36. Taşdemir C (2003) Combined effects of mineral admixtures and curing conditions on the sorptivity coefficient of concrete. Cem Concr Res 33:1637–1642

    Article  Google Scholar 

  37. Bakker RFM (1988) Chapter 3: initiation period, corrosion of steel in concrete. In: Schiessl P (ed) RILEM Report of the Technical Committee 60-CSC. Chapman and Hall, London, pp 22–55

    Google Scholar 

  38. Bonavetti V, Donza H, Rahhal V, Irassar E (2000) Influence of initial curing on the properties of concrete containing limestone blended cement. Cem Concr Res 30:703–708

    Article  Google Scholar 

Download references

Acknowledgements

The authors would like to thank to Mr. Vakıf Kiriş for his invaluable assistance during the laboratory phase of the study.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Erhan Güneyisi.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Güneyisi, E., Mermerdaş, K. Comparative study on strength, sorptivity, and chloride ingress characteristics of air-cured and water-cured concretes modified with metakaolin. Mater Struct 40, 1161–1171 (2007). https://doi.org/10.1617/s11527-007-9258-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1617/s11527-007-9258-5

Keywords

Navigation