Abstract
This paper presents the results of recent experimentation performed to study time-dependent changes in the mechanical performance of textile reinforced concrete (TRC) made with AR glass fibre and to specify the decisive mechanisms influencing the durability of this composite material. The effect of the matrix composition was investigated by varying hydration kinetics and alkalinity of the binder mix. At first, tensile tests on (accelerated) aged specimens made of TRC were performed. The results showed a pronounced decrease in the tensile strength and strain capacity for TRC whose matrix was most alkaline (Portland cement was used exclusively as binder in this composition). The performance of TRC made with modified, alkali reduced matrix composition was to a great extent unaffected by exposure to accelerated ageing. In order to investigate the mechanisms leading to such different behaviours, changes in the mechanical performance of the fibre–matrix bond were studied using double-sided pullout test specimens with under-critical fibre reinforcement after they had undergone accelerated ageing. Furthermore, the appearance of the microstructure in the interface between fibre and matrix was described by images obtained from SEM-investigations. Measured reductions in the toughness of the composite materials could be attributed mainly to the visual observed disadvantageous new formation of solid phases in the fibre–matrix interface, while the deterioration of the AR glass fibre seemed to play only a secondary role. It could be shown that the morphology of the formed solid hydration phases depends to a large extent on the matrix composition.
Similar content being viewed by others
References
Brameshuber W (ed) (2006) Textile reinforced concrete. State-of-the-Art Report of RILEM Technical Commitee 201-TRC, RILEM Report 36, RILEM Publications S.A.R.L.
Paul A (1977) Chemical durability of glasses: a thermodynamic approach. J Mater Sci 12(11):2246–2268
Majumdar AJ, West JM, Larner LJ (1977) Properties of glass fibres in cement environment. J Mater Sci 12(5):927–936
Larner LJ, Speakman K, Majumdar AJ (1976) Chemical interactions between glass fibres and cement. J Non-Cryst Solids 20(1):43–74
Yilmaz V, Glasser F (1991) Reaction of alkali-resistant glass fibres with cement. Part 2: Durability in cement matrices conditioned with silica fume. Glass Technol 32(4):138–147
Hempel S, Butler M (2007) Microscopic investigations on durability of textile-reinforced concrete. In: Fernandes I, Guedes A, Noronha F, Teles M, dos Anjos Ribeiro M (eds) Proceedings of the 11th euroseminar on microscopy applied to building materials. Porto (CD-ROM)
Otto WH (1955) Relationship of tensile strength of glass fibers to diameter. J Am Ceram Soc 38(3):122–125
Tomozawa M (1996) Fracture of glasses. Annu Rev Mat Sci 26:43–74
Metcalf AG, Schmitz GK (1972) Mechanism of stress corrosion in E-glass fibres. Glass Technol 13(1):5–16
Michalske TA, Freiman SW (1983) A molecular mechanism for stress corrosion in vitreous silica. J Am Ceram Soc 66(4):284–288
Purnell P, Short NR, Page CL (2001) A static fatigue model for the durability of glass fibre reinforced cement. J Mater Sci 36(22):5385–5390
Purnell P, Beddows J (2005) Durability and simulated aging of new matrix glass fibre reinforced concrete. Cem Concr Compos 27(9–10):875–884
Orlowsky J, Raupach M, Cuypers H, Wastiels J (2005) Durability modelling of glass fibre reinforcement in cementitious environment. Mater Struct 38(2):155–162
Orlowsky J, Raupach M (2006) Modelling the loss in strength of AR-glass fibres in textile-reinforced concrete. Mater Struct 39(6):635–643
Orlowsky J, Raupach M (2008) Durability model for AR-glass fibres in textile-reinforced concrete. Mater Struct 41(7):1225–1233
Bartos PJM, Zhu W (1996) Effect of microsilica and acrylic polymer treatment on the aging of GRC. Cem Concr Compos 18(1):31–39
Stucke M, Majumdar AJ (1976) Microstructure of glass fibre-reinforced cement composites. J Mater Sci 11(6):1019–1030
Bentur A, Diamond S (1987) Aging and microstructure of glass fiber cement composite reinforced with different types of glass fibers. Durab Build Mater 4(3):201–226
Laws V, Langley AA, West JM (1986) The glass fibre/cement bond. J Mater Sci 21(1):289–296
Katz A, Bentur A (1996) Mechanisms and processes leading to changes in time in the properties of CFRC. Adv Cem Based Mater 3(1):1–13
Bentur A (2000) Role of interfaces in controlling durability of fiber-reinforced cements. J Mater Civil Eng 12(1):2–7
Hempel R, Butler M, Hempel S, Schorn H (2005) Durability of textile reinforced concrete. In: Proceedings of the international RILEM workshop on high performance fiber reinforced cementitious composites in structural applications. New York (CD-ROM)
Zhu W, Bartos PJM (1997) Assessment of interfacial microstructure and bond properties in aged GRC using a novel microindentation method. Cem Concr Res 27(11):1701–1711
Gao SL, Mäder E, Plonka R (2004) Coatings for glass fibers in a cementitious matrix. Acta Mater 52(16):4745–4755
Mäder E, Plonka R, Schiekel M, Hempel R (2004) Coatings on alkali-resistant glass fibres for the improvement of concrete. J Ind Text 33(3):191–207
Butler M (2009) Zur Dauerhaftigkeit von Verbundwerkstoffen aus zementgebundenen Matrices und alkaliresistenten Glasfaser-Multifilamentgarnen. Dissertation at the Institute of Construction Materials, TU Dresden (in German)
Zinck P, Pay MF, Rezakhanlou R, Gerard JF (1999) Mechanical characterisation of glass fibres as an indirect analysis of the effect of surface treatment. J Mater Sci 34(9):2121–2133
Zinck P, Mäder E, Gerard JF (2001) Role of silane coupling agent and polymeric film former for tailoring glass fiber sizings from tensile strength measurements. J Mater Sci 36(21):5245–5252
Ohno S, Hannant DJ (1994) Modelling the stress–strain response of continuous fibre reinforced cement composites. ACI Mater J 91(3):306–312
Scherer GW (1999) Crystallization in pores. Cem Concr Res 29(8):1347–1358
Litherland KL, Oakley DR, Proctor BA (1981) The use of accelerated aging procedures to predict the long term strength of GRC composites. Cem Concr Res 11(2):455–466
Purnell P, Short NR, Page CL, Majumdar AJ (2000) Microstructural observations in new matrix glass fibre reinforced cement. Cem Concr Res 30(11):1747–1753
Jesse F (2004) Tragverhalten von Filamentgarnen in zementgebundener Matrix, Technische Universität Dresden, Dissertation
Xu S, Krüger M, Reinhardt H, Ozbolt J (2004) Bond characteristics of carbon-, alkali resistant glass-, and aramid textiles in mortar. J Mater Civil Eng 16:356–364
Hartig J, Häußler-Combe U, Schicktanz K (2008) Influence of bond properties on the tensile behaviour of textile reinforced concrete. Cem Concr Compos 30(10):898–906
Köckritz U, Offermann P, Jesse F, Curbach M (2005) Influence of textile manufacturing technology on load bearing behaviour of textile reinforced concrete. In: Proceedings of the 13 international techtextil symposium. CD-ROM only
Jesse F, Will N, Curbach M, Hegger J (2005) Flexural load-bearing behavior of textile-reinforced concrete. In: Dubey A (ed) Textile-reinforced concrete. Proceedings of the ACI Fall convention. Kansas City, SP-250CD-5, 2008, CD-ROM
Acknowledgements
The work was carried out under the aegis of the Collaborative Research Centre 528 ‘‘Textile Reinforcement for Structural Strengthening and Retrofitting’’, financed by the German Research Foundation.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Butler, M., Mechtcherine, V. & Hempel, S. Durability of textile reinforced concrete made with AR glass fibre: effect of the matrix composition. Mater Struct 43, 1351–1368 (2010). https://doi.org/10.1617/s11527-010-9586-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1617/s11527-010-9586-8