Skip to main content
Log in

Use of plastic wastes as a binding material in the manufacture of tiles: case of wastes with a basis of polypropylene

  • Original Article
  • Published:
Materials and Structures Aims and scope Submit manuscript

Abstract

This paper aims to study the possibility of using plastic waste as a binding material instead of cement in the manufacturing of roofing tiles. The study bears on plastics with a polypropylene basis. Plastic waste is carried to melt and mixed with a varying proportion of sand (variation between 50 and 80% in weight). Five compsitions of tiles characterized by their proportion in plastic waste of 0% (tiles in mcro-concrete), 20, 30, 40 and 50% were studied. The measuremens of physical and mechanical properties show that plastic waste tiles whose proportion in plastic is 40%, give better results than micro-concrete tiles (TP0). Those tiles have a porosity that is below 1% and are practically impervious even after breaking impact tests.

Résumé

Cet article vise à étudier la possibilité d’utiliser des déchets plastiques comme liant en substitution du ciment dans la confection des tuiles de couverture. L’étude porte sur les plastiques à base de polypropylène. Les déchets plastiques sont portés à fusion et mélangés à une proportion variable de sable (variation entre 50% et 80% en poids). Les mesures des propriétés physiques et mécaniques montrent que les tuiles aux déchets plastiques ayant une proportion en plastique de 40% (TP40), donnent de meilleurs résultats que les tuiles en micro-béton (TP0). Ces tuiles ont une porosité inférieure à 1% et sont pratiquement imperméables même après les essais de rupture par choc.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4

Similar content being viewed by others

References

  1. Guy L (1997) Contribution au recyclage des polyéthylènes par une thermolyse ménagée en solution : contrôles des mécanismes et valorisation. Thèse de l’Université Claude Bernard Lyon 1, France

    Google Scholar 

  2. Frerejean V (1994) Mélange de polymères thermoplastiques PE-PS-PVC: application au recyclage. Thèse de l’INSA de Lyon, France

    Google Scholar 

  3. Paul D, Vinson C, Locke C (1972) The potential for reuse of plastics recovered from solid waste. Polym Eng Sci 12(3)157–166

    Google Scholar 

  4. Ehring JR (1992) Plastic recycling products and process. Carl Hanser, New York

    Google Scholar 

  5. Al-Tayyib AJ, Al-Zahrani M, Rasheeduzzafar M, AL-Sulaimani GJ (1988) Effect of polypropylene fiber reinforcement on the properties of fresh and hardened concrete in the Arabian Gulf environment. Cem Concr Res 18(4):561–570

    Google Scholar 

  6. Allan ML, Kukacka LE (1995) Strengh and durability of polypropylene fiber reinforcement grouts. Cem Concr Res 25(3):511–521

    Google Scholar 

  7. Saoula S, Haddadi S, Aït-moktar K (2009) Performances mécaniques des bétons bitumineux modifies à base d’additifs polymérés. In: Proceeding of 1st international conference on sustainable built environment infrastructures in developing countries, 12–14 October, 2009

  8. Choi YW, Moon DJ, Chung JS, Cho SK (2005) Effect waste PET bottles aggregates on the properties of concrete. Cem Concr Res 35:776–781

    Google Scholar 

  9. Ochi T, Okubo, Fukui K (2007) Development of recycled PET fiber. Cem Concr Compos 29:448–455

  10. Ghernouti Y, Rabehi B (2009) Récupération et valorisation des déchets des sacs en plastiques dans le domaine de la construction. In: Proceeding of 1st international conference on sustainable built environment infrastructures in developing countries, 12–14 October, 2009

  11. Mesbah HA, Buyle-bodin F (1999) Efficiency of polypropylene and metallic fibres on control of shrinkage and cracking of recycled aggregates mortars. Constr Build Mater 13(1):439–447

    Google Scholar 

  12. Toutanji HA (1996) The use of rubber tire particles in concrete to replace mineral aggregates. Cem Concr Compos 18:35–139

    Google Scholar 

  13. Aubernon C, De Larrard F (2006) Faisabilité du renforcement d’assises routières à l’aide de pneus usagés, Revue Eupéenne de Génie Civil 10(10):1265–1280

    Google Scholar 

  14. Bonnet S (2003) Effet de l’incorporation de granulats caoutchouc sur la résistance à la fissuration des mortiers, XXIème Prix René Houpert

  15. Siddique R, Khatib JM (2010) Abrasion resistance and mechanical properties of high volume fly ash concrete. Mater Struct 43(10):709–718

    Google Scholar 

  16. Hui L, Zhang MH, Ou JP (2006) Abrasion resistance of concrete containing nano particles for pavement. Wear 260(11–12):1262–1266

    Google Scholar 

  17. Yazoghli-marzouk O, Dheilly RM, Queneudec M (2007) Valorization of post-consumer waste plastic in cementitious concrete composite. Waste Manag 27(2):1870–1876

    Google Scholar 

  18. Remadnia A, Dheilly RM, Laidoudi B, Queneudec M, Use of animal proteins as foaming agent in cementitious concrete composites manufactured with recycled PET aggregates. Constr Build Mater 23(10):3118–3123

  19. Hannawi K, Prince W, Kamali-bernard S (2010) Effect of thermoplastic aggregates incorporation on physical, mechanical and transfer behavior of cementitious materials. Waste Biomass Valor 1:251–259

    Google Scholar 

  20. DAGO T (1994) Tuiles en micro-béton et en fibro-mortier: optimisation du dosage des constituants et apport d’un plastifiant. Mémoire de Fin d’Etudes ingénieur, ENSTP

    Google Scholar 

  21. Blaga A (1975) Les thermoplastiques. Division des recherches en bâtiment, Conseil National de Recherches Canada, Digest de la construction, Ottawa

  22. Tuiles en fibro-mortier (TMF) et en micro-béton (TMB) (1995) Côte d’Ivoire Normalisation, norme ivoirienne NI 05.10.001

  23. AFPC-AFREM (1997) Méthodes recommandées pour la mesure des grandeurs physiques associées à la durabilité. Compte rendu des journées techniques du 11 au 12 décembre 1997, Toulouse

  24. Récupérer les déchets plastiques pour fabriquer des pavés (2006) Réseau d’Entreprises pour le Développement de l’Artisanat (RESEDA), Rapport technique, IPS

  25. Blaga A (1975) Propriétés et comportement des matières plastiques. Division des recherches en bâtiment Conseil National de Recherches Canada, Digest de la construction, Ottawa

    Google Scholar 

  26. Blaga A, et Beaudouin JJ (1986) Le béton de résine. Division des recherches en bâtiment Conseil National de Recherches Canada, Digest de la construction, Ottawa

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Athanas Konin.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Konin, A. Use of plastic wastes as a binding material in the manufacture of tiles: case of wastes with a basis of polypropylene. Mater Struct 44, 1381–1387 (2011). https://doi.org/10.1617/s11527-011-9704-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1617/s11527-011-9704-2

Keywords

Mots clés

Navigation