Abstract

Building Information Modeling (BIM) is a new approach of construction design. It does not only facilitate the digital representation for designs but also provides all the necessary information for any project before it is constructed. Despite this advantage, the adoption of BIM in Malaysian construction is very low. Motivated by this, current study has focused on assessing current status of BIM implementation in Malaysian construction industry. It has also investigated advantages and disadvantages together with barriers to implementations of BIM and proposing effective strategies for enhancing the BIM implementation in construction industry. Investigation was done through survey where 150 questionnaire forms were distributed and 95 completed forms received back were analyzed with Average Index (AI) and Relative Importance Index (RII) method. Findings of the study revealed that the rate of BIM implementation in construction industry is very low. Major advantages of BIM are improved scheduling, improved drawing coordinated, controlling time and cost and singe detailed model. Enhanced collaboration, requires coordinated drawing, interoperability are the major disadvantages and limitations of BIM. Major barriers to low level of BIM implementation are lack of competent staff to operate the software, unawareness of the technology and non availability of parametric library. Provision of trial software, training of construction staff and introducing of BIM in university curriculum are very effective strategies in enhancing the implementation of BIM.

Keywords:

Advantages and disadvantages of BIM, barriers to implementation , building information modeling, Malaysian construction industry, strategies to implement BIM,

References

1. AGC Committee, 2005. The Contractor's Guide to BIM. 1st Edn., Associated General Contractors of America, AGC Research Foundation, Las Vegas, NV.
   
2. Arayici, Y., F. Khosrowshahi, A.M. Ponting and S. Mihindu., 2009. Towards implementation of building information modelling in the construction industry. Proceeding of 5th International Conference on Construction in the 21st Century (CITC-V), "Collaboration and Integration in Engineering, Management and Technology". Istanbul, Turkey.
   
3. Ashcraft, H.W., 2008. Building information modeling: A framework for collaboration. Construct. Lawyer, 28(3).
   
4. AutoDesk, 2011. Building Information Modeling.
   Direct Link
5. Azhar, S., 2008. Building Information ModeIing (BIM): A new paradigm for visual interactive modeling and simulation for construction project. Proceeding of 1st International Conference on Construction in Developing Countries (ICCIDC-I), Advancing and Integrating Construction Education, Research and Practice. Karachi, Pakistan.
   
6. Baba, H.D., 2010. Building information modeling in local construction industry. M.A. Thesis, Faculty of Civil Engineering, Universiti Teknologi Malaysia, Malaysia.
   
7. Bentley, 2013. Seminars and Trainings on BIM.
   Direct Link
8. Bernstein, P.G. and J.H. Pittman, 2004. Barrier in Adopting Building Information Modeling (BIM) in the Building Industry. White Paper Presented in Autodesk Building Solution in November 2004.
   Direct Link
9. Campbell, D.A., 2007. Building Information Modelling: The Web3D Application for AEC. Web3D 2007, Perugia, Italy, April 15-18.
   
10. CRC for Construction Innovation, 2005. CRC Annual Report 2004-2005.
    Direct Link
11. CRC for Construction Innovation, 2007. Adopting BIM for Facilities Adopting BIM for Facilities Management: Solutions for Managing the Sydney Opera House.
    Direct Link
12. Fallon, K.K. and M.E. Palmer, 2007. General buildings information handover guide: Principles, methodology and case studies. National Institute of Standards and Technology, NISTIR 7417, pp: 99.
    CrossRef    
13. Fortner, B., 2008. SPECIAL REPORT: Are You Ready for BIM? ASCE Civil Engineering Magazine.
    Direct Link
14. Frary, B.R., 1996. Hints for designing effective questionnaires. Assess. Res. Evaluat., 5(3).
    
15. Hergunsel, M.F., 2011. Benefit of BIM for construction manager and BIM based scheduling. M.A. Thesis, Worcester Polytechnic Institute.
    
16. Kiviniemi, A., V. Tarandi, J. Karlshøj, H. Bell and O.J. Karud, 2008. Review of the Development and Implementation of IFC Compatible BIM.
    Direct Link
17. McGraw Hill, 2009. Smart Mark Report, Building Information Modeling: Getting Information Modeling to the Bottom Line, McGraw Hill Research and Analytics.
    
18. McGraw Hill Construction, 2009. The Business Value of BIM. McGraw Hill, New York.
    
19. Memon, A.H., I.A. Rahman and A.A.A. Azis, 2011. Preliminary study on causative factors leading to construction cost overrun. Int. J. Sustain. Construct. Eng. Technol., 2(1): 57-71.
    
20. Mokhtar, A., C. Bedard and P. Fazio, 1998. Information model for managing design changes in a collaborative environment. J. Comput. Civil Eng., 12(2): 82-92.
    CrossRef    
21. Morrison, C., 2010. BIM 2010: The benefit and barriers for construction contractor in the Auckland. A Report for Industry Project CONS 7819, Unitect New Zealand.
    
22. Muzvimwe, M., 2011. 5D BIM Explained. Published on 20 Sep 2011.
    Direct Link
23. Paulson, B.C. and J.W. Fondahl, 1980. Toward Improved Transportation Construction through Research. The Construction Institute, Stanford University, Stanford, Calif.
    
24. Pena, G., 2011. Evaluation of training needs for Building Information Modeling (BIM). M.A. Thesis, Civil Engineering, University of Texas at Arlington, United States.
    
25. Salazar, G., H. Mokbel, M. Aboulezz and W. Kearney, 2006. The use of building information model in construction logistics and progress tracking in the worcester trial courthouse. Proceeding of Joint International Conference on Computing and Decision Making in Civil Building Engineering, Motreal, Canada.
    
26. Smith, D., 2007. An introduction to Building Information Modeling (BIM). J. Build. Inform. Model., 17: 12-14.
    
27. Smith, D.K. and M. Tardiff, 2009. Building Information Modeling: A Strategic Implementation Guide. John Wiley and Sons Inc., Hoboken.
    CrossRef    
28. Tatum, C.B., 1989. Organizing to increase innovation in the construction firm. J. Construct. Eng. M. ASCE, 115(4): 602-617.
    CrossRef    
29. Taylor, J.E. and R. Levitt, 2007. Innovation alignment and project network dynamics: An integrative model for change. Project Manage. J., 38(3): 22-35.
    CrossRef    
30. Thompson, D.B., 2001. E-construction: Don't Get Soaked by the Next wave. FWHT Briefing Paper.
    Direct Link
31. Thompson, D. and R. Miner, 2006. Building Information Modeling-BIM: Contractual Risks are changing with Technology.
    Direct Link

Competing interests

The authors have no competing interests.

Open Access Policy

This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Copyright

The authors have no competing interests.