Vol. 2, No. 8, 2007

Download this article
Download this article For screen
For printing
Recent Issues

Volume 19
Issue 3, 303–540
Issue 2, 157–302
Issue 1, 1–156

Volume 18, 5 issues

Volume 17, 5 issues

Volume 16, 5 issues

Volume 15, 5 issues

Volume 14, 5 issues

Volume 13, 5 issues

Volume 12, 5 issues

Volume 11, 5 issues

Volume 10, 5 issues

Volume 9, 5 issues

Volume 8, 8 issues

Volume 7, 10 issues

Volume 6, 9 issues

Volume 5, 6 issues

Volume 4, 10 issues

Volume 3, 10 issues

Volume 2, 10 issues

Volume 1, 8 issues

The Journal
About the journal
Ethics and policies
Peer-review process
 
Submission guidelines
Submission form
Editorial board
 
Subscriptions
 
ISSN (electronic): 1559-3959
ISSN (print): 1559-3959
 
Author index
To appear
 
Other MSP journals
Tension buckling in multilayer elastomeric isolation bearings

James M. Kelly and Shakhzod M. Takhirov

Vol. 2 (2007), No. 8, 1591–1605
Abstract

Seismic isolators are constructed from multiple layers of elastomer (usually natural rubber) reinforced with steel plates; they are, therefore, very stiff in the vertical direction, but soft in the horizontal direction. The buckling of these bearings under compression load is a well-understood phenomenon and has been widely studied. It is therefore unexpected that the buckling analysis for compression predicts that the isolator can buckle in tension at a load close to that for buckling in compression. The linear elastic model that leads to both compression and tension buckling is an extremely simple one, so it might be argued that the tensile buckling may be an artifact of the model itself rather than a property of the isolator. To test the simple theoretical model we have conducted a numerical simulation study using a finite element model of a multilayer elastomeric bearing. We find that the prediction of tensile buckling by the simple linear elastic theory is indeed accurate and not an artifact of the model.

Keywords
steel-reinforced elastomeric seismic isolators, tension and compression buckling, linear theory, nonlinear finite element analysis
Milestones
Received: 31 July 2006
Accepted: 20 April 2007
Published: 1 October 2007
Authors
James M. Kelly
Earthquake Engineering Research Center
1301 South 46th St., Bldg. 451
University of California, Berkeley
Richmond, CA 94804
United States
Shakhzod M. Takhirov
Earthquake Engineering Research Center
1301 South 46th St., Bldg. 451
University of California, Berkeley
Richmond, CA 94804
United States