Thermal Science 2023 Volume 27, Issue 2 Part A, Pages: 1015-1022
https://doi.org/10.2298/TSCI2302015C
Full text ( 491 KB)
Cited by
Building exterior wall thermal energy saving model based on green energy-saving nanomaterials
Chi Mingshu (School of Municipal and Environmental Engineering, Jilin Jianzhu University, Changchun, China), cms20062006@163.com
Yu Kecheng (School of Municipal and Environmental Engineering, Jilin Jianzhu University, Changchun, China)
Zhang Cong (School of Municipal and Environmental Engineering, Jilin Jianzhu University, Changchun, China)
Gao Yuan (School of Municipal and Environmental Engineering, Jilin Jianzhu University, Changchun, China)
Lu Junchen (School of Municipal and Environmental Engineering, Jilin Jianzhu University, Changchun, China)
In order to reduce building energy consumption and make wall insulation
materials meet fire protection requirements, the authors put forward a kind
of energy saving model of building exterior wall under green and energy
saving nanomaterials. Mainly using PBECA energy saving calculation
software. By setting up multi-component, multi-material method. The energy
consumption of building aggregate in light energy saving device modified by
nanomaterials is simulated and analyzed, and the energy consumption of
building agent area is compared. The energy saving effect of light energy
saving system modified by nanomaterial fly ash in prefabricated buildings
was verified. According to the calculation of PBECA energy-saving
calculation software, the annual energy consumption of the building
assembled by nanomaterials modified fly ash lightweight energy-saving units
is 5981 kWh, and the energy consumption per unit area is 35.01 kWh/m2. In
the 1980's, the annual energy consumption of household agents was 86237 kWh,
and the energy consumption per unit area was 50.42 kWh/m2. Through the
analysis of the calculation results, it is concluded that the energy saving
efficiency of replacing the light-saving wall with nanomaterials fly ash in
precast area A can reach 65% of the energy saving standard.
Keywords: building energy consumption, thermal insulation material, green and energy-saving nanomaterials, buildings, external wall heat energy saving
Show references
Wang, N., et al., Application of New Green Energy-Saving Technology in Construction Engineering, IOP Conference Series: Earth and Environmental Science, 565 (2020), 1, 012004
Qin, Y. D., et al.,. Exploring new Building Energy Saving Control Strategy Application under the Energy Internet of Things, IOP Conference Series: Earth and Environmental Science, 701 (2021), 1, 012060
Lare, Y., et al., Optimal Design and Performance Analysis of a Grid Connected Photovoltaic System in Togo, American Journal of Energy Research, 9 (2021), 1, pp. 56-74
Shen, T., et al., Analysis of Economic Thickness and the Suitable Insulation Thickness of External Wall Insulation Layer, IOP Conference Series: Earth and Environmental Science, 719 (2021), 2, 022020
Savoskula, V. A., et al., Environmental Assessment of Energy Efficient and Energy Saving Technologies, IOP Conference Series: Earth and Environmental Science, 866 (2021), 1, 012027
Liu, W., et al., Investigation on Numerical Simulation of Radiation Heating Thermal Environment in Car Cabin, Journal of Physics: Conference Series, 1838 (2021), 1, 012055
Yin, R., et al., Flexible Flow Shop Scheduling and Energy Saving Optimization Strategy under Low Carbon Target, Journal of Physics: Conference Series, 1939 (2021), 1, 012095
Xu, Y., et al., Energy Saving Optimization Scheduling of Intelligent Energy Station Based on Beetle Antennae Searching-Particle Swarm Optimization Algorithm, Journal of Physics: Conference Series, 2205 (2022), 1, 012004
Tikhomirov, D. A., et al., Energy-Saving Automated ir Heater for Calves, IOP Conference Series: Earth and Environmental Science, 848 (2021), 1, 012088
Novia, N., et al., The Application of Energy Saving to the Kali Adem Muara Angke Port Design, IOP Conference Series: Earth and Environmental Science, 878 (2021), 1, 012030
Yibogao, Research on Adaptive Ship Trim Energy Saving Scheme Based on Inte11igent Loading, IOP Conference Series: Earth and Environmental Science, 644 (2021), 1, 012015
Siti Birkha Mohd Ali, A. B., et al., Analysis of Energy Consumption and Potential Energy Savings of an Institutional Building in Malaysia, Alexandria Engineering Journal, 60 (2021), 1, pp. 805-820
Bl, A., et al.,. Energy Consumption Pattern and Indoor Thermal Environment of Residential Building in Rural China, Energy and Built Environment, 1 (2020), 3, pp. 327-336
Alwetaishi, M., et al., The Use of Artificial Intelligence (AI) and Big-Data to Improve Energy Consumption in Existing Buildings, IOP Conference Series: Materials Science and Engineering, 1148 (2021), 1, 012001
Qin, C., et al., Research on the Influence of Light-Controlled Lighting System and Light-Controlled Shading System on Building Energy Consumption Based on Light Environment, IOP Conference Series: Earth and Environmental Science, 7169 (2021), 2, 022059
Qin, Y. D., et al., Exploring New Building Energy Saving Control Strategy Application under the Energy Internet of Things, IOP Conference Series: Earth and Environmental Science, 701 (2021), 1, pp. 63-012060
Cai, P., et al., Study on Residents’ Behavior of Using Air Conditioners in Bedrooms in Jiangsu, Zhejiang and Shanghai, Architecture Engineering and Science, 3 (2022), 1, pp. 54-68
Chang-Fa, J. I., et al., Influence of Outdoor Wind Environment on Thermal Environment Around Rural Houses, IOP Conference Series: Earth and Environmental Science, 647 (2021), 1, 012207
Nabilah, A., et al., Energy Efficiency in Church Building Based on Sefaira Energy Use Intensity Standard., IOP Conference Series: Earth and Environmental Science, 738 (2021), 1, 012013
Xu, X. M., et al., Reexamine the Relationship between New Environmental Paradigm and Low-Carbon Consumption Behavior, IOP Conference Series: Earth and Environmental Science, 766 (2021), 1, 012068