Abstract
A method is proposed for the design of optimal internal grinding cycles in multidimensional control- parameter space, under numerous technological constraints. This method is based on stepwise modeling of metal removal in terms of specified machining properties, with allowance for elastic deformation and the cutting kinematics. Optimization is based on dynamic programming, which permits any number of technological constraints to be taken into account and is not sensitive to the type of mathematical models employed or the constraints on the target function.
Similar content being viewed by others
References
Rowe, W.B., Principles of Modern Grinding Technology, Liverpool: Elsevier, 2013.
Oliveira, J.F.G., Silva, E.J., Guo, C., and Hashimoto, F., Industrial challenges in grinding, CIRP Ann., 2009, vol. 58, pp. 633–680.
Mikhel’kevich, V.N., Avtomaticheskoe upravlenie shlifovaniem (Automated Control of Grinding), Moscow: Mashinostroenie, 1975.
Novoselov, Yu.K., Dinamika formoobrazovaniya poverkhnostei pri abrazivnoi obrabotke (Dynamics of Shaping of Surfaces during Abrasive Treatment), Sevastopol: Sevastop. Nats. Tekh. Univ., 2012.
Ardashev, D.V., Group abrasive machining in flexible production, Russ. Eng. Res., 2015, vol. 35, no. 4, pp. 305–306.
D’yakonov, A.A. and Shipulin, L.V., Selecting the cutting conditions for plain grinding by the periphery of wheel, Russ. Eng. Res., 2014, vol. 34, no. 12, pp. 804–816.
Nathan, R.D., Vijayaraghavan, L., and Krishnamurthy, R., Intelligent estimation of burning limits to aid in cylindrical grinding cycle planning, Heavy Vehicle Syst., 2001, vol. 80, pp. 48–59.
Pereverzev, P.P., Modeling and optimization of operating programs in the automated machine-building manufacture, Vestn. Yuzh.-Ural. Gos. Univ., Ser.: Mashinostr., 2012, no. 12 (271), pp. 152–157.
Pereverzev, P.P., Popova, A.V., and Pimenov, D.Yu., Relation between the cutting force in internal grinding and the elastic deformation of the technological system, Russ. Eng. Res., 2015, vol. 35, no. 3, pp. 215–217.
Popova, A.V., Design of optimal internal-grinding cycles, Russ. Eng. Res., 2015, vol. 35, no. 5, pp. 378–380.
Pereverzev, P.P. and Popova, A.V., Creation of optimal treatment cycles by example of internal grinding, Mater. 66-i nauch. konf. (Proc. 66th Sci. Conf.), Yuzhno-Ural’sk: Yuzh.-Ural. Gos. Univ., 2014, pp. 451–481.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © P.P. Pereverzev, A.V. Akintseva, 2016, published in STIN, 2016, No. 5, pp. 26–31.
About this article
Cite this article
Pereverzev, P.P., Akintseva, A.V. Optimal internal grinding cycles in multidimensional control-parameter space. Russ. Engin. Res. 36, 974–978 (2016). https://doi.org/10.3103/S1068798X16110174
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16110174