Abstract
Rheological properties of polycrystalline iridium of I 99.9 grade are investigated in order to construct the dependence of deformation resistance on studied factors (strain ratio, rate, and temperature). The tests of cylindrical samples made of iridium are performed using a cam plastometer in temperature range t = 900–1400°C at strain rates ξ = 0.2 and 20 s–1, as well as at t = 800–1400°C and ξ = 2 s–1 using the upsetting method at a strain rate up to 0.8. The results of investigations can be used to develop the pressure treatment of iridium wares at large plastic strains and in a broad range of thermomechanical parameters.
Similar content being viewed by others
References
Timofeev, N.I., Ermakov, A.V., Dmitriev, V.A., and Panfilov, P.E., Osnovy metallurgii i tekhnologiya proizvodstva izdelii iz iridiya (Foundations of Metallurgy and Production Technology of Iridium Wares), Yekaterinburg: Ural Otd. Ross. Akad. Nauk, 1996.
Merker, J. and Koch, M., Advan. Mater. Res, 2014, vols. 783–786, p. 1165.
Merker, J., Fischer, B., Lupton, D.F., and Witte, J., Mater. Sci. Forum, 2007, vols. 539–543, no. 3, p. 2216.
Loginov, Yu.N., Yermakov, A.V., Grohovskaya, L.G., and Studenok, G.I., Platinum Metal. Rev., 2007, vol. 51, no. 4, p. 178.
Loginov, Yu.N., Ermakov, A.V., Grokhovskaya, L.G., and Studenok, G.I., Tsvetn. Met., 2006, no. 6, pp. 85–88.
George, E.P., McKamey, C.G., Ohriner, E.K., and Lee, E.H., Mater. Sci. Eng., A, 2002, vols. 319–321, p. 466.
Ohriner, E.K., Platinum Metal. Rev., 2008, vol. 52, no. 3, p. 186.
Mordike, B.L. and Brookes, C.A., Platinum Metal. Rev., 1960, vol. 4, no. 3, p. 94.
Potapov, A.I., Mazunin, V.P., Dvoinikov, D.A., and Kokovikhin, E.A., Zavod. Lab. Diagnost. Mater., 2010, vol. 76, no. 9, p. 59.
Polukhin, P.I., Gunn, G.Ya., and Galkin, A.M., Soprotivlenie plasticheskoi deformatsii metallov i splavov: Spravochnik (Resistance of Plastic Deformation of Metals and Alloys), Moscow: Metallurgiya, 1983.
Panfilov, P., Novgorodov, V., and Yermakov, A., J. Mater. Sci. Lett., 1994, vol. 13, pp. 137–141.
Weiland, R., Lupton, D.F., Fischer, B., Merker, J., Scheckenbach, C., and Witte, J., Platinum Metal. Rev., 2006, vol. 50, no. 4, pp. 158–170.
Migachev, B.A., Soprotivlenie deformatsii v mekhanike obrabotki davleniem (Deformation Resistance in Pressure Treatment Mechanics), Yekaterinburg: Ural Otd. Ross. Akad. Nauk, 1997.
Prasad, Y.V.R.K. and Rao, K.P., Mater. Sci. Eng., A, 2005, vol. 391, pp. 141–150.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.N. Loginov, S.V. Gladkovskii, A.I. Potapov, A.A. Fomin, D.R. Salikhyanov, 2015, published in Izvestiya VUZ. Tsvetnaya Metallurgiya, 2015, No. 4, pp. 48–54.
About this article
Cite this article
Loginov, Y.N., Gladkovskii, S.V., Potapov, A.I. et al. Investigation into the deformation resistance of polycrystalline iridium. Russ. J. Non-ferrous Metals 56, 532–539 (2015). https://doi.org/10.3103/S1067821215050090
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821215050090