Optimization of dangerous goods transport in urban zone

Authors

  • Hamid Ebrahimi Lahore University of Management Sciences, Lahore, Pakistan
  • Milos Tadic University of defence in Belgrade, Department of logistics, Belgrade, Serbia

DOI:

https://doi.org/10.31181/dmame1802138e

Keywords:

Multi-criteria Decision-making, Hazardous Materials Routing, Risk, Dijkstra’s Algorithm

Abstract

Due to the specificity of the transport of dangerous goods, as well as the obligations arising from the legislation regulating this field, all the actors of this process are obliged to take special measures in order to avoid undesired consequences. Special attention is paid to the planning of the transport of dangerous goods. One of the most important planning elements is choosing a route for the transport of dangerous goods in urban areas. In order to take preventive measures, risk assessment is carried out on the routes and the minimum risk route is defined. In this paper, a new model for selection of the routes for the transport of dangerous goods (hazmat) on the network of urban roads is proposed. The model is based on a multi-criteria risk analysis and the traditional Dijkstra algorithm (D-R model). The D-R model is a new approach for minimizing the cost and a variety of risk criteria in hazmat routing, which adequately takes into account and minimizes a number of risks on potential routes. The model is based on route selection based on the absolute risk size. The proposed routing model was tested in a real case and in a real urban hazmat routing problem, in Serbia.

Downloads

Download data is not yet available.

References

Anderson, R. T., & Barkan, C. P. (2004). Railroad accident rates for use in transportation risk analysis. Transportation Research Record, 1863(1), 88-98.

Androutsopoulos, K. N., & Zografos, K. G. (2010). Solving the bicriterion routing and scheduling problem for hazardous materials distribution. Transportation Research Part C: Emerging Technologies, 18(5), 713-726.

Batarliene, N. (2008). Risk analysis and assessment for transportation of dangerous freight. Transport, 23(2), 98-103.

Bonvicini, S., & Spadoni, G. (2008). A hazmat multi-commodity routing model satisfying risk criteria: A case study. Journal of Loss Prevention in the Process Industries, 21(4), 345-358.

Bonvicini, S., Vezzani, E., & Spadoni, G. (2002). Decision Making & Risk Management. In Proceedings of the ESREL’02 Conference, Lyon (pp. 557-564).

Brockoff, L. H. (1992). A risk management model for transport of dangerous goods, EUR14675EN. JRC, Ispra, Italy.

Bubbico, R., Di Cave, S., & Mazzarotta, B. (2004). Risk analysis for road and rail transport of hazardous materials: a GIS approach. Journal of Loss prevention in the Process Industries, 17(6), 483-488.

Bubbico, R., Ferrari, C., & Mazzarotta, B. (2000). Risk analysis of LPG transport by road and rail. Journal of Loss Prevention in the Process Industries, 13(1), 27-31.

Dijkstra, E. W. (2022). A note on two problems in connexion with graphs. In Edsger Wybe Dijkstra: His Life, Work, and Legacy (pp. 287-290).

Fabiano, B., Currò, F., Palazzi, E., & Pastorino, R. (2002). A framework for risk assessment and decision-making strategies in dangerous good transportation. Journal of hazardous materials, 93(1), 1-15.

Fu, L. (2001). An adaptive routing algorithm for in-vehicle route guidance systems with real-time information. Transportation Research Part B: Methodological, 35(8), 749-765.

Ghazinoory, S., & Kheirkhah, A. S. (2008). Transportation of hazardous materials in Iran: A strategic approach for decreasing accidents. Transport, 23(2), 104-111.

Gheorghe, A. V., Birchmeier, J., Vamanu, D., Papazoglou, I., & Kröger, W. (2005). Comprehensive risk assessment for rail transportation of dangerous goods: a validated platform for decision support. Reliability Engineering & System Safety, 88(3), 247-272.

Godoy, S. M., Santa Cruz, A. S., & Scenna, N. J. (2007). STRRAP system—A software for hazardous materials risk assessment and safe distances calculation. Reliability Engineering & System Safety, 92(7), 847-857.

Govan, B. R. (2005). Risks of transporting dangerous goods: South Durban case study (Doctoral dissertation).

Hamouda, G. (2004). Risk-based decision support model for planning emergency response for hazardous materials road accidents.

Huang, B., & Fery, P. (2005). Aiding route decision for hazardous material transportation. Transportation Research Board, 2005.

Jovanović, V. D., Tica, S., Milovanović, B., & Živanović, P. (2009). Researching and analyzing the features of oil and demand for transporting oil derivates in the area of Belgrade. Transport, 24(3), 249-256.

Kara, B. Y., & Verter, V. (2004). Designing a road network for hazardous materials transportation. Transportation Science, 38(2), 188-196.

Knoflacher, H., Pfaffenbichler, P., & Nußbaumer, H. (2002). Quantitative Risk Assessment of Heavy Goods Vehicle Transport through Tunnels-the Tauerntunnel Case Study.

Kohl, B., Botschek, K., & Hörhan, R. (2006). Austrian risk analysis for road tunnels. In 3rd International conference, tunnel safety and ventilation, Graz, Austria.

Lin, C. C. (2001). The freight routing problem of time-definite freight delivery common carriers. Transportation Research Part B: Methodological, 35(6), 525-547.

Madala, B. P. R. (2000). A simulation study for hazardous materials transportation risk assessment (Doctoral dissertation, Concordia University).

Mani, A., & Prozzi, J. (2004). State-of-the-practice in freight data: a review of available freight data in the US.

Milazzo, M. F., Lisi, R., Maschio, G., Antonioni, G., Bonvicini, S., & Spadoni, G. (2002). HazMat transport through Messina town: from risk analysis suggestions for improving territorial safety. Journal of Loss Prevention in the Process Industries, 15(5), 347-356.

OECD. (2001). Safety in tunnels - Transport of dangerous goods through road tunnels, OECD Publications.

Ohtani, H., & Kobayashi, M. (2005). Statistical analysis of dangerous goods accidents in Japan. Safety Science, 43(5-6), 287-297.

Ormsby, R. W., & Le, N. B. (1988). Societal risk curves for historical hazardous chemical transportation accidents. Preventing Major Chemical and Related Process Accidents, Institution of Chemical Engineers, Great Britain, 133-147.

Pamučar, D., Ljubojević, S., Kostadinović, D., & Đorović, B. (2016). Cost and risk aggregation in multi-objective route planning for hazardous materials transportation—A neuro-fuzzy and artificial bee colony approach. Expert Systems with Applications, 65, 1-15.

Rao, K. R., Rao, S. V., & Chary, V. (2004). Estimation of risk indices of chemicals during transportation. Process safety progress, 23(2), 149-154.

Saccomanno, F., & Haastrup, P. (2002). Influence of safety measures on the risks of transporting dangerous goods through road tunnels. Risk Analysis: AN INTERNATIONAL JOURNAL, 22(6), 1059-1069.

Spadoni, G., Egidi, D., & Contini, S. (2000). Through ARIPAR-GIS the quantified area risk analysis supports land-use planning activities. Journal of hazardous materials, 71(1-3), 423-437.

Van den Horn, B. A., Hoeksma, J., Naaktgeboren, N. M., & Schoenmakers, E. J. M. (2006). The RWSQRA model for road tunnels. Den Haag: Rijskwaterstaat, Holland.

Vilchez, J. A., Sevilla, S., Montiel, H., & Casal, J. (1995). Historical analysis of accidents in chemical plants and in the transportation of hazardous materials. Journal of Loss Prevention in the process Industries, 8(2), 87-96.

Wang, X., Zhu, J., Ma, F., Li, C., Cai, Y., & Yang, Z. (2016). Bayesian network-based risk assessment for hazmat transportation on the Middle Route of the South-to-North Water Transfer Project in China. Stochastic Environmental Research and Risk Assessment, 30, 841-857.

Zografos, K. G., & Androutsopoulos, K. N. (2004). A heuristic algorithm for solving hazardous materials distribution problems. European Journal of Operational Research, 152(2), 507-519.

Zografos, K. G., & Androutsopoulos, K. N. (2008). A decision support system for integrated hazardous materials routing and emergency response decisions. Transportation Research Part C: Emerging Technologies, 16(6), 684-703.

Published

2018-10-15

How to Cite

Ebrahimi, H., & Tadic, M. (2018). Optimization of dangerous goods transport in urban zone. Decision Making: Applications in Management and Engineering, 1(2), 131–152. https://doi.org/10.31181/dmame1802138e