Abstract
Twist extrusion is a recently developed method of severe plastic deformation that principally uses torsion to generate high strains in a repeatedly extruded billet, while maintaining a constant cross-section. The method thus results in a deformation gradient across the billet section. To date, the grain refinement behaviour of alloys deformed by twist extrusion have only been investigated qualitatively. In this study high resolution electron backscattered diffraction has been used to quantify the deformation structures produced by twist extrusion, in a model, single-phase, Al-0.13 % Mg alloy, with the aim of investigating the potential of the technique for producing ultra-fine grained metals, as well as the homogeneity of the microstructure and strain distribution in processed billets.
References
[1] R.Z.Valiev, Y.Estrin, Z.Horita, T.G.Langdon, M.J.Zehetbauer, Y.T.Zhu: JOM 58 #4 (2006) 33.Search in Google Scholar
[2] T.C.Lowe: JOM 58 #4 (2006) 28.10.1007/s11837-006-0212-8Search in Google Scholar
[3] R.Z.Valiev, R.K.Islamgaliev, I.V.Alexandrov: Prog. Mater. Sci.45 (2000) 103.10.1016/S0079-6425(99)00007-9Search in Google Scholar
[4] Y.Beygelzimer, D.Orlov, V.Varyukhin, in: Y.T.Zhu, T.G.Langdon, R.S.Mishra, S.L.Semiatin, M.J.Saran, T.C.Lowe (Eds.), Ultrafine Grained Materials II, TMS (The Minerals, Metals & Materials Society) (2002) 297.Search in Google Scholar
[5] D.Orlov: Theory developing and design of twist extrusion technology for titanium and copper, Ph.D. Thesis, Donetsk National Technical University, Donetsk (2003).Search in Google Scholar
[6] Y.Beygelzimer, V.Varyukhin, D.Orlov, S.Synkov: Twist extrusion – process for strain accumulation, TEAN, Donetsk (2003) [in russian].Search in Google Scholar
[7] V.Varyukhin, Y.Beygelzimer, S.Synkov, D.Orlov: Mater. Sci. Forum503 (2004) 335.10.4028/www.scientific.net/MSF.503-504.335Search in Google Scholar
[8] P.B.Prangnell, J.R.Bowen, A.Gholinia, in: A.R. Dinesen et al. (Eds.) 22nd Riso Int. Symposium on Materials Science, Science of Metastable and Nanocrystalline alloys, Roskilde Denmark (2001) 105.Search in Google Scholar
[9] Y.Beygelzimer, D.Orlov, A.Korshunov, S.Synkov, V.Varyukhin, I.Vedernikova, A.Reshetov, A.Synkov, L.Polyakov, I.Korotchenkova: Sol. St. Phen.114 (2006) 69.10.4028/www.scientific.net/SSP.114.69Search in Google Scholar
[10] P.B.Prangnell, J.R.Bowen, in: Y.T.Zhu, T.G.Langdon, R.S.Mishra, S.L.Semiatin, M.J.Saran, T.C.Lowe (Eds.), Ultrafine Grained Materials II, TMS (The Minerals, Metals & Materials Society) (2002) 89.Search in Google Scholar
[11] P.B.Prangnell, J.R.Bowen, P.J.Apps: Mater. Sci. Eng A375 (2004) 178.10.1016/j.msea.2003.10.170Search in Google Scholar
[12] M.Berta, P.J.Apps, P.B.Prangnell: Mater. Sci. and Eng. A410 (2005) 381.10.1016/j.msea.2005.08.026Search in Google Scholar
[13] P.B.Prangnell, Y.Huang, M.Berta, P.J.Apps, in: Int. Symposium on Fundamentals of Deformation and Annealing, Manchester, September, 2006, Mater. Sci. Forum (in press).Search in Google Scholar
© 2007, Carl Hanser Verlag, München