Abstract
The solid-state nature of the friction stir welding (FSW) process leads to several advantages over fusion welding methods as problems associated with cooling from the liquid phase are avoided. This process eliminates many of the defects associated with fusion welding techniques such as shrinkage, solidification cracking and porosity. In general, FSW has been found to produce a low number of defects and is very tolerant of variations in parameters and materials. Nevertheless, physical and chemical properties of the weld zone developed during FSW are a primary concern. In this study, the mechanical properties and corrosion behavior of the weld zone resulting after FSW are investigated and improved by addition of SiC particles. AZ31 magnesium alloy sheets were FS welded and simultaneously processed by incorporation of SiC particles. Mechanical properties and corrosion behavior of FS welded specimens were compared with those of FS welded and processed specimens. The results showed that the addition of SiC particles during FSW considerably improved the mechanical properties and corrosion resistance of the weld zone. Based on the obtained results, incorporation of SiC hard particles in the microstructure of weld zone produced by FSW is highly recommended.
References
[1] Z.Zuberova, Y.Estrin, T.T.Lamark, M.Janecek, R.J.Hellmig, M.Krieger: J. Mater. Process. Technol.184 (2007) 294. 10.1016/j.jmatprotec.2006.11.098Search in Google Scholar
[2] H.E.Friedrich, H.E.Friedrich: Magnesium technology: metallurgy, design data, applications, Springer, Germany (2006).Search in Google Scholar
[3] W.M.Thomas, E.D.Nicholas, J.C.Needham, M.G.Murch, P.Temple-Smith, C.J.Dawes: Friction-stir butt welding, GB Patent No. 9125978.8, International patent application No. PCT/GB92/02203 (1991).Search in Google Scholar
[4] G.Cam: Int. Mater. Rev.56 (2011) 1. 10.1179/095066010X12777205875750Search in Google Scholar
[5] T.S.Rao, G.M.Reddy, G.S.Rao, S.R.K.Rao: Int. J. Mater. Res.105 (2014) 375. 10.3139/146.111033Search in Google Scholar
[6] P.R.Kalvala, A.Patil, R.R.Rangaraju, K.S.Raja, M.Misra: Int. J. Mater. Res.47 (2010) 217. 10.3139/147.110041Search in Google Scholar
[7] C.Meran, C.Meran: Int. J. Mater. Res.104 (2013) 1197. 10.3139/146.110975Search in Google Scholar
[8] Z.Barlas, Z.Barlas: Int. J. Mater. Res.101 (2010) 801. 10.3139/146.110340Search in Google Scholar
[9] Y.F.Sun, Y.F.Sun: Mater. Sci. Eng. A528 (2011) 5470. 10.1016/j.msea.2011.03.077Search in Google Scholar
[10] P.V.Kumar, G.M.Reddy, K.S.Rao: Defen. Technol.11 (2015) 166. 10.1016/j.dt.2015.01.002Search in Google Scholar
[11] M.Abbasi, B.Bagheri, M.Dadaei, H.Omidvar, M.Rezaei: Int. J. Adv. Manuf. Technol.77 (2015) 2051. 10.1007/s00170-014-6577-xSearch in Google Scholar
[12] P.Karthikeyan, P.Karthikeyan: Int. J. Adv. Manuf. Technol.80 (2015) 1919. 10.1007/s00170-015-7160-9Search in Google Scholar
[13] A.Abdolahzadeh: Incorporation of SiC particles in FS weld of AZ31 Mg alloy, M. Sc. Thesis, Amirkabir University of Technology, Tehran, Iran (2014).Search in Google Scholar
[14] ASTM E112-13, Standard Test Methods for Determining Average Grain Size, ASTM International, West Conshohocken, PA, USA (2013).Search in Google Scholar
[15] ASTM E8/E8M-15, Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, West Conshohocken, PA, USA (2015).Search in Google Scholar
[16] ASTM E384-11e1, Standard Test Method for Knoop and Vickers Hardness of Materials, ASTM International, West Conshohocken, PA, USA (2011).Search in Google Scholar
[17] D.Hull, D.Hull: Introduction to Dislocations, 5th Edition, Elsevier, New York (2011). 10.1016/B978-0-08-096672-4.00001-3Search in Google Scholar
[18] M.Dadaei, H.Omidvar, B.Bagheri, M.Jahazi, M.Abbasi: Int. J. Mater. Res.105 (2014) 369. 10.3139/146.111025Search in Google Scholar
[19] J.Q.Su, T.W.Nelson, C.J.Sterling: Mater. Sci. Eng.A 405 (2005) 277. 10.1016/j.msea.2005.06.009Search in Google Scholar
[20] G.E.Dieter, G.E.Dieter: Mechanical Metallurgy, McGraw-Hill, London (1988).Search in Google Scholar
[21] D.Lahaie, J.D.Embury, M.M.Chadwick, G.T.Gray: Scr. Metal. Mater.27 (1992) 139. 10.1016/0956-716X(92)90102-KSearch in Google Scholar
[22] M.Abbasi, A.Abdollahzadeh, B.Bagheri, H.Omidvar: J. Mater. Eng. Perform.24 (2015) 5037. 10.1007/s11665-015-1786-5Search in Google Scholar
[23] T.Mukai, T.Mohri, M.Mabuchi, M.Nakamura, K.Ishikawa, K.Higashi: Scr. Mater.39 (1998) 1249. 10.1016/S1359-6462(98)00296-6Search in Google Scholar
[24] Y.Z.Estrin, P.A.Zabrodin, I.S.Braude, T.V.Grigorova, N.V.Iasev, V.V.Pustovalov, V.S.Fomenko, S.E.Shumilin: Low Temp. Phys.36 (2010) 1100. 10.1063/1.3539781Search in Google Scholar
[25] S.Amini, S.Amini: Int. J. Adv. Manuf. Technol.73 (2014) 127. 10.1007/s00170-014-5806-7Search in Google Scholar
[26] M.Naderi, M.Abbasi, A.Saeed-Akbari: Metal. Mater. Trans.A 44 (2013) 1852. 10.1007/s11661-012-1546-1Search in Google Scholar
[27] C.Liu, D.L.Chen, S.Bhole, X.Cao, M.Jahazi: Mater. Charact.60 (2009) 370. 10.1016/j.matchar.2008.10.009Search in Google Scholar
[28] G.L.Song, G.L.Song: Adv. Eng. Mater.1 (1999) 11. 10.1002/(SICI)1527-2648(199909)1:1<11::AID-6ADEM11>3.0.Search in Google Scholar
© 2016, Carl Hanser Verlag, München
