Abstract
Recycled paper shopping bag fibers were melt-compounded using a batch mixer with biobased/biodegradable polylactide (PLA) at 10 and 30 wt.% using silane as a coupling agent. These PLA/fiber composites were then injection molded to produce both solid and microcellular tensile bars. The mechanical properties (specific modulus, specific tensile strength, specific toughness, and strain at break) of the neat PLA and PLA composites were tested and the cell morphology of the microcellular samples was examined using scanning electron microscopy. It was observed that the addition of the recycled paper shopping bag fibers resulted in an increase in cell density and decrease in average cell size for the microcellular components when compared with the neat PLA. The addition of the fibers increased the specific modulus of both solid and microcellular components, and high fiber contents (30 wt.%) resulted in an increase in specific tensile strength, yet yielded a decrease in the strain at break and specific toughness. The storage modulus was also improved with the addition of 10 and 30 wt.% fibers for both solid and microcellular components.
References
Ammar, I., et al., “Injection Molded Composites of Short Alfa Fibers and Biodegradable Blends”, Polym. Composite, 27 (4), 341–348 (2006)10.1002/pc.20196Search in Google Scholar
Anderson, K., et al., “Toughening of Polylactide by Melt Blending with Linear Low-Density Polyethylene”, J. Appl. Polym. Sci., 89(14), 3757–3768 (2003)10.1002/app.12462Search in Google Scholar
Baldwin, D. F., Suh, N. P., “Microcellular Poly(ethylene terephthalate) and Crystallizable Poly(ethylene terephthalate): Characterization of Process Variables”, SPE ANTEC Tech. Papers, 1503–1507 (1992)Search in Google Scholar
Bastioli, C., “Global Status of the Production of Biobased Packaging Materials”, Starch, 53 (8), 351–355 (2001)10.1002/1521-379X(200108)53:8<351::AID-STAR351>3.0.CO;2-RSearch in Google Scholar
Bhardwaj, R., et al., “Renewable Resource Based Green Composites from Recycled Cellulose Fiber and Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Bioplastic”, Biomacromolecules, 7 (6), 2044–2051 (2006)10.1021/bm050897ySearch in Google Scholar
Bledzki, A. K., Gassan, J., “Composites Reinforced with Cellulose Based Fibers”, Prog. Polym. Sci., 24(2), 221–274 (1999)10.1016/S0079-6700(98)00018-5Search in Google Scholar
Chen, L., et al., “Effects of Shear Stress and Pressure Drop Rate on Microcellular Foaming Process”, J. Cell. Plast., 37(4), 353–363 (2001)10.1106/VHC8-33K7-M1C7-0M2HSearch in Google Scholar
Clemons, C., “Wood-Plastic Composites in the United States: The Interfacing of Two Industries”, Forest Products Journal, 52 (6), 10–18 (2002)Search in Google Scholar
C-MOLD, “Chapter 23 Jetting”, in C-MOLD Design Guide, 3rd Ed., 213–215 (1999)Search in Google Scholar
Collias, D. I., et al., “Impact Toughening of Polycarbonate by Microcellular Foaming”, Polymer, 25 (18), 3978–3983 (1994)10.1016/0032-3861(94)90283-6Search in Google Scholar
Collias, D. I., Baird, D. G., “Tensile Toughness of Microcellular Foams of Polystyrene, Styrene-Acrylonitrile Copolymer, and Polycarbonate, and the Effect of Dissolved Gas on the Tensile Toughness of the Same Polymer Matrices and Microcellular Foams”, Polym. Eng. Sci., 35(14), 1167–1177 (1995)10.1002/pen.760351407Search in Google Scholar
Drumright, R. E., et al., “Polylactic Acid Technology”, Adv. Mater., 12(23), 1841–1846 (2000)10.1002/1521-4095(200012)12:23<1841::AID-ADMA1841>3.0.CO;2-ESearch in Google Scholar
Eckert, C., “Opportunities for Natural Fibers in Plastic Composites”, Proc. Prog. Woodfibre-Plast. Compos., Toronto, ON (2000)Search in Google Scholar
Eichhorn, S. J., et al., “Review: Current International Research into Cellulosic Fibers and Composites”, J. Mater. Sci., 36(9), 2107–2131 (2001)10.1023/A:1017512029696Search in Google Scholar
Garlotta, D., “A Literature Review of Poly(lactic acid)”, J. Polym. Environ., 9(2), 63–84 (2001)10.1023/A:1020200822435Search in Google Scholar
Gong, S., et al., “Microcellular Injection Molding”, Int. Polym. Proc., 20(2), 202–214 (2005)10.3139/217.1883Search in Google Scholar
Gross, R. A., Kalra, B., “Biodegradable Polymers for the Environment”, Science, 297 (5582), 803–807 (2002)10.1126/science.297.5582.803Search in Google Scholar
Hiljanen-Vainio, M., et al., “Impact Modification of Lactic Acid Based Poly(Ester-Urethanes) by Blending”, J. Appl. Polym. Sci., 63(10), 1335–1343 (1997)10.1002/(SICI)1097-4628(19970307)63:10<1335::AID-APP13>3.0.CO;2-3Search in Google Scholar
Huda, M. S., et al., “A Study on Biocomposites from Recycled Newspaper Fiber and Poly(lactic acid)”, Ind. Eng. Chem. Res., 44(15), 5593–5601 (2005)10.1021/ie0488849Search in Google Scholar
Huneault, M. A., Li, H., “Morphology and Properties of Compatibilized Polylactide/Thermoplastic Starch Blends”, Polymer, 48 (1), 270–280 (2007)10.1016/j.polymer.2006.11.023Search in Google Scholar
Karnani, R., et al., “Biofiber-Reinforced Polypropylene Composites”, Polym. Eng. Sci., 37(2), 476–483 (1997)10.1002/pen.11691Search in Google Scholar
Kim, E. G., et al., “Physical Properties and Morphology of Polycaprolactone/Starch/Pine-Leaf Composites”, J. Appl. Polym. Sci., 103(2), 928–934 (2007)10.1002/app.25239Search in Google Scholar
Kramschuster, A., et al., “Quantitative Study of Shrinkage and Warpage Behavior for Microcellular and Conventional Injection Molding”, Polym. Eng. Sci., 45(10), 1408–1418 (2005)10.1002/pen.20410Search in Google Scholar
Kramschuster, A., et al., “Injection Molded Solid and Microcellular Polylactide and Polylactide Nanocomposites”, J. Biobased Mat. & Bioenergy, 1 (1), 37–45 (2007)10.1166/jbmb.2007.004Search in Google Scholar
Kwag, C., et al., “Rheology of Molten Polystyrene with Dissolved Supercritical and Near-Critical Gases”, J. Polym. Sci., Part B: Polym. Phys., 37(19), 2771–2781 (1999)10.1002/(SICI)1099-0488(19991001)37:19<2771::AID-POLB6>3.0.CO;2-9Search in Google Scholar
Kwag, C., et al., “Effects of Dissolved Gas on Viscoelastic Scaling and Glass Transition Temperature of Polystyrene Melts”, Ind. Eng. Chem. Res., 40(14), 3048–3052 (2001)10.1021/ie000680eSearch in Google Scholar
Leaversuch, R., “Biodegradable Polyesters: Packaging Goes Green”, Plast. Technol., 48(9), 66–73 (2002)Search in Google Scholar
Li, G., et al., “Analytical Modeling of Tensile Strength of Particulate-Filled Composites”, Polym. Composite, 22 (5), 593–603 (2001)10.1002/pc.10562Search in Google Scholar
Martini, J. E., et al., “Production and Analysis of Microcellular Thermoplastic Foams”, SPE ANTEC Tech. Papers, 674–676 (1982)Search in Google Scholar
Masirek, R., et al., “Composites of Poly(L-Lactide) with Hemp Fibers: Morphology and Thermal and Mechanical Properties”, J. Appl. Polym. Sci., 105(1), 255–268 (2007)10.1002/app.26090Search in Google Scholar
Matuana, L. M., et al., “Processing and Cell Morphology Relationships for Microcellular Foamed PVC/Wood-Fiber Composites”, Polym. Eng. Sci., 3(7), 1137–1147 (1997)10.1002/pen.11758Search in Google Scholar
Matuana, L. M., et al., “Structures and Mechanical Properties of Microcellular Foamed Polyvinyl Chloride”, Cell. Polym., 17(1), 1–16 (1998)Search in Google Scholar
Matuana, L. M., et al., “Batch Process Microcellular Foaming of Poly (lactic acid)”, PPS-20 Symposium, University of Akron, Paper No.125, June 20–24 (2004)Search in Google Scholar
Misra, M., et al., “The Effect of Silane Treated- and Untreated-Talc on the Mechanical and Physico-Mechanical Properties of Poly(Lactid Acid)/Newspaper Fibers/Talc Hybrid Composites”, Compos. Part B-Eng, 38 (3), 367–379 (2007)10.1016/j.compositesb.2006.06.010Search in Google Scholar
Mohanty, A. K., et al., “Biofibres, Biodegradable Polymers and Biocomposites: An Overview”, Macromol. Mater. Eng., 276/277, 1–24 (2000)10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-WSearch in Google Scholar
Nam, J. Y., et al., “Crystallization Behavior and Morphology of Biodegradable Polylactide/Layered Silicate Nanocomposite”, Macromolecules, 36 (19), 7126–7131 (2003)10.1021/ma034623jSearch in Google Scholar
Park, C. B., Ph.D. Thesis, Appendix A, Massachusetts Institute of Technology, Cambridge, MA (1993)Search in Google Scholar
Pilla, S., et al., “Polylactide-Pine Wood Flour Composites”, Proceedings of the 9th International Conference on Wood & Biofiber Plastic Composites (2007)Search in Google Scholar
Plackett, D., et al., “Biodegradable Composites Based on L-Polylactide and Jute Fibers”, Compos. Sci. Technol., 63(9), 1287–1296 (2003)10.1016/S0266-3538(03)00100-3Search in Google Scholar
Royer, J. R., et al., “High-Pressure Rheology of Polystyrene Melts Plasticized with CO2: Experimental Measurement and Predictive Scaling Relationships”, J. Polym. Sci., Part B: Polym. Phys., 38(23), 3168–3180 (2000)10.1002/1099-0488(20001201)38:23<3168::AID-POLB170>3.0.CO;2-ESearch in Google Scholar
Seeler, K. A., Kumar, V., “Fatigue of Notched Microcellular Polycarbonate”, ASME, Cell. Polym., MD, 38, 93–108 (1992)Search in Google Scholar
Seeler, K. A., Kumar, V., “Tension-Tension Fatigue of Microcellular Polycarbonates: Initial Results“, J. Reinf. Plast. Comp., 12 (3), 359–376 (1993)10.1177/073168449301200308Search in Google Scholar
Suh, N. P., “Chapter 3 Microcellular Plastics“, in Innovation in Polymer Processing-Molding, Stevenson, J. F. (Ed.), Hanser Publishers, Munich, p. 93–149 (1996)Search in Google Scholar
The Technology Roadmap for Plant/Crop-based Renewable Resources 2020, URL: http://www1.eere.energy.gov/biomass/pdfs/technology_roadmap.pdf.Search in Google Scholar
Tsuji, H., et al., “Poly(L-Lactide)/Nano-Structured Carbon Composites: Conductivity, Thermal Properties, Crystallization, and Biodegradation”, Polymer, 48 (14), 4213–4225 (2007)10.1016/j.polymer.2007.05.040Search in Google Scholar
Whaling, A., et al., “Novel Talc-Filled Biodegradable Polyester Composites”, Ind. Eng. Chem. Res., 45(22), 7497–7503 (2006)10.1021/ie060604xSearch in Google Scholar
© 2007, Carl Hanser Verlag, Munich
